A method has been developed for producing an epoxy composition based on a low-viscosity epoxy-resorcinol resin, a phosphazene-containing curing agent, isophoronediamine, and thermally expanded graphite as a filler. The degree of cure and the absence of side reactions during the curing process were confirmed using IR spectroscopy. The influence of the content of phosphazene-containing curing agent and filler on the physico-mechanical properties of the composition, its fire resistance, and antistatic properties were studied. Using the UL-94 HB horizontal burning test, it was found that the addition of 10 and 20 wt. % phosphazene-containing curing agent (relative to isophoronediamine) reduces the burning speed by 10 times compared to a sample without phosphazene. The addition of a filler to a composition containing phosphazene reduces the burning speed by 25 times compared to a composition without phosphazene and imparts antistatic properties to the epoxy composition, as evidenced by the specific volume electrical resistance of the order of 101 Ohm·m. Phosphazene-containing curing agent had no statistically significant effect on specific volume electrical resistivity (p > 0.05). Tests of physico-mechanical and adhesive properties (tensile strength, compressive strength, water absorption, water solubility, abrasion resistance, and adhesive strength) of filled epoxy compositions with 10 and 20 wt. % phosphazene-containing curing agent demonstrated that these properties met the requirements for floor coverings in construction and parts of electrical devices.
A method for the synthesis of an amine-containing epoxy resin curing agent by dissolving hexakis-[(4-formyl)phenoxy]cyclotriphosphazene in an excess of isophoronediamine was developed. The curing agent was characterized via NMR and IR spectroscopy and MALDI-TOF mass spectrometry, and its rheological characteristics were studied. Compositions based on DER-354 epoxy resin and the synthesized curing agent with different amounts of phosphazene content were obtained. The rheological characteristics of these compositions were studied, followed by their curing. An improvement in several thermal (DSC), mechanical (compression, tension, and adhesion), and physicochemical (water absorption and water solubility) characteristics, as well as the fire resistance of the obtained materials modified with phosphazene, was observed, compared with unmodified samples. In particular, there was an improvement in adhesive characteristics and fire resistance. Thus, compositions based on a curing agent containing a 30% modifier were shown to fulfill the V-1 fire resistance category. The developed compositions can be processed by contact molding, winding, and resin transfer molding (RTM), and the resulting material is suitable for use in aircraft, automotive products, design applications, and home repairs.
This work is devoted to the influence of phosphazene modifiers with different substituents on the curing process, thermal properties and flammability of benzoxazine resin. Novel catalysts with m-toluidine substituents were introduced. The catalytic activity of studied phosphazene compounds decreased in the row: hexachlorocyclotriphosphazene (HCP) > tetra m-toluidine substituted phosphazene PN-mt (4) > hexa m-toluidine substituted phosphazene PN-mt (6) > hexaphenoxycyclotriphosphazene (HPP), where HPP is totally inactive. Two types of catalysis: basic and acid were proposed. A brief study of resulting properties of polybenzoxazines was presented. The addition of any studied modifier caused the decrease of glass transition temperature and thermal stability of polymers. The morphology of cured compositions was characterized by matrix-dispersion phase structure. All phosphazene containing polybenzoxazines demonstrated the improved flame resistance.
The reaction of β-diketophosphazene with the europium (III) salt synthesized the corresponding metal complex which was structured with (3-aminopropyl)triethoxysilane and treated with dibenzoylmethane for additional coordination of europium atoms. The polymer thus obtained exhibits luminescence with a maximum of 615 nm, which is characteristic of europium. The polymer is thermally stable up to 300 °C, the coating based on it has a contact angle of 101°, and the adhesive strength of the coating to non-finished glass (according to ISO 2409: 2013) is 1 point.
An analysis of the influence of common modifiers on the kinetics of the curing process of epoxy-anhydride vitrimers was carried out. As common modifiers to enhance the “vitrimeric” nature of the material, zinc acetylacetonate as a transesterification catalyst and glycerol as a modifier of hydroxyl group content were chosen. The curing process of all obtained compositions was studied by differential scanning calorimetry (DSC) followed by the application of the isoconversional approach. It was shown that additives significantly affect the curing process. The resulting cured polymers were shown to be chemically recyclable by dissolution in the mixture of ethylene glycol and N-methylpirrolidone in a volume ratio of nine to one. The introduction of both zinc acethylacetonate and glycerol to the neat formulation led to a decrease in the dissolution time by 85.7% (from 35 h for the neat epoxy-anhydride formulation to 5 h for the modified formulation). In order to show the opportunity of the secondary use of recyclates, the mixtures based on the basic composition containing 10 wt. % of secondary polymers were also studied. The introduction of a recycled material to neat composition led to the same curing behavior as glycerol-containing systems.