To reduce the material costs as well as the density of Liquid Silicone Rubber (LSR), LSR foams can be produced in an injection molding process. Expandable thermoplastic microspheres can be used as blowing agents. This publication deals with the analysis of the cell structure of these LSR foams. For this purpose, cylindrical disks are injection molded and examined for their cell structure as a function of different proportions of microspheres using a scanning electron spectroscope. In addition, the density of the samples is determined. It was found that a very homogeneous cell structure is produced in this process, that heat transport has a significant influence on the expansion of the microspheres, and that the formation of a filler network limits the expansion at higher proportions of blowing agent.
Liquid silicone rubber (LSR) is primarily used in injection molding. Foamed molded parts made of LSR are almost nonexistent because the process reliability of LSR foam injection molding is currently not given. It makes sense to have suitable foaming processes for this material as well, because the density of this elastomer is about 1.15 g cm−3. With the injection molding process presented herein for foaming LSR, density reductions of up to 40% can be achieved. In this process, up to 3% by weight of water is added to the material. In addition, the hardness of the component changes, it becomes softer. Especially in the case of hardness, the process parameter mold temperature has a decisive influence, as it determines the pore size in the component. Herein, the structural properties of the silicone foam are now discussed as a function of the process parameters and additives for foaming. Thus, with the new process, material can be saved, the haptic properties of components can be changed, and a stable processing method for foamed components made of LSR is found.
This article shows three different water‐based physical blowing agents for liquid silicone rubber (LSR) in terms of physical, mechanical, and morphological properties depending on the manufacturing parameters and amounts of blowing agents. The compositions consist of common LSRs added with pure water, water–silicone oil emulsion, and aqueous silicone. The foaming process is initiated in an injection molding process. By subvolumetrically filling the mold, it is possible to foam the LSR during the injection molding process. This publication aims to compare different, water‐based blowing agents for LSR in the injection molding process. The results show that for all foams porosities between 0.25 and 0.4 are possible. An analysis of the foam structure shows that the aqueous silicone produces a significantly more homogeneous structure than the other two blowing agents. In addition, the mechanical properties are analyzed. For this purpose, tensile tests are carried out and the Shore hardness is determined. The elasticity and mechanical properties decrease slightly. The specific tensile strength also shows a small decrease, although this may be due to either the gradient of the foam structure or chemical reactions between the blowing agents and the LSR.
Silicone elastomers filled with silica exhibit a softening effect under cyclic loading, also known as the Mullins effect. There are various theories as to the origin of this effect. One theory cites the breaking of secondary bonds as the reason, while another theory cites molecular slipping and the loosening of entanglements as the reason for the softening. In contrast to previous studies, foamed silicone rubbers are investigated here. In addition to the silica, the samples investigated here contain thermally expandable microspheres, resulting in two types of filler (silica and the microspheres as thermoplastic particles). Two different kinds of these microspheres with different particle sizes and expansion temperatures are used. To study the effect, hysteresis tensile tests (Mullins tests) as well as FTIR analyses, density measurements and microscopy images were carried out. The Mullins tests were evaluated for their curve shape, their hysteresis area of the first cycle and the residual strain. The residual strain shows a correlation with the porosity, as the larger microspheres have a higher porosity and a higher residual strain. The area of the first hysteresis correlates with the number of microspheres, but not with the porosity. The larger microspheres have a smaller hysteresis area but a higher porosity. The FTIR analysis showed that the stabilizer used to produce the microspheres is based on silicon oxide. As a result, there are secondary bonds between the microspheres and the silicone elastomer, which are broken at the beginning.
The material parameters required to describe material behavior can change with the age of the components due to chemical and physical aging processes. The finite element method (FEM) is a tool for designing components for later use. The aim of this study is to correlate the change in the mechanical properties of silicone elastomers from standard tests over a longer period of time with the parameters of the Mooney–Rivlin model. To date, there are no publications on the development of the Mooney–Rivlin parameters of silicone elastomers over a storage period. For this purpose, the Shore A hardness, rebound elasticity, compression set and tensile properties were investigated over an aging period of approx. 200 days on two liquid silicone rubbers (LSRs) and one room-temperature-vulcanizing (RTV) silicone rubber. Depending on the silicone elastomer used, different trends in the characteristic values can be observed over the storage period. In general, increases in the Shore A hardness, rebound resilience and stress at a 100% strain with a decrease in the compression set can be determined. In addition to standard tensile tests, the material’s multiaxial behavior under tension was probed, and it was found that the similarly stress at a 100% strain increased. Finite element simulations verified the standard tensile test and corresponding Mooney–Rivlin model parameters. These parameters from the uniaxial tensile were validated in the multiaxial behavior, and the model’s accuracy in representing material properties and the influence of aging on the FEM simulation were affirmed.