Ralf Urs Giesen

Dr. Ralf Urs Giesen

Department Polymer Technology, Institute of Mechanical Engineering, University of Kassel, Mönchebergstr. 3, 34125 Kassel, Germany

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 May 2022 in Materials
Verified
Journal Article
Open access
PDF file
SMSvenja Marl
Svenja Marl
RGRalf Urs Giesen
Ralf Urs Giesen
HHHans-Peter Heim
Hans-Peter Heim
To reduce the material costs as well as the density of Liquid Silicone Rubber (LSR), LSR foams can be produced in an injection molding process. Expandable thermoplastic microspheres can be used as blowing agents. This publication deals with the analysis of the cell structure of these LSR foams. For this purpose, cylindrical disks are injection molded and examined for their cell structure as a function of different proportions of microspheres using a scanning electron spectroscope. In addition, the density of the samples is determined. It was found that a very homogeneous cell structure is produced in this process, that heat transport has a significant influence on the expansion of the microspheres, and that the formation of a filler network limits the expansion at higher proportions of blowing agent.

2 October 2023 in Polymers
Verified
Journal Article
Open access
PDF file
MNMohammad Ali Nikousaleh
Mohammad Ali Nikousaleh
RGRalf Urs Giesen
Ralf Urs Giesen
HHHans-Peter Heim
Hans-Peter Heim
CJChristopher Johannes
Christopher Johannes
The multicomponent injection molding of liquid silicone rubbers (LSR) with thermoplastics, such as polybutylene terephthalate (PBT) or polyamide (PA), is a state-of-the-art technique and is used in the manufacturing process for many components in the automotive industry and in the field of sanitary engineering. Standard thermoplastics, such as acrylonitrile butadiene styrene (ABS), cannot be bonded with silicone rubbers in injection molding because of their low heat deflection temperature. In this study, we investigated ABS grades approved for medical applications to show how dynamic mold heating and various pretreatment methods for thermoplastic surfaces can be used to produce ABS-LSR test specimens. In addition, such components’ sterilization effect on the adhesive bond will be shown.

23 April 2024 in Polymers
Verified
Journal Article
Open access
PDF file
THTimo Hofmann
Timo Hofmann
RGRalf Urs Giesen
Ralf Urs Giesen
HHHans-Peter Heim
Hans-Peter Heim
Silicone elastomers are high-performance plastics. In the extrusion process, only high-consistency silicone rubbers were used. In order to reduce the cost and weight, silicone rubbers can be foamed during processing. In this study, high-consistency silicone rubber is processed with different physical and chemical blowing agents. The resulting reaction kinetics, as well as the mechanical and morphological properties, had been investigated and compared with each other. This showed that the chemical blowing agent significantly influenced the crosslinking reaction compared to the microspheres and the water/silica mixture tested, but it also achieved the lowest density compared to the physical blowing agents. When evaluating the foam morphology, it became clear that the largest number of pores was achieved with the microspheres and the largest pores when using the water/silica mixture. Furthermore, it has been shown that the different mechanisms of action of the blowing agents have a major influence on the mechanical properties, such as the micro shore hardness and the foam morphology.

9 August 2024 in Materials
Verified
Journal Article
Open access
PDF file
SMSvenja Marl
Svenja Marl
XNXiaofei Ni
Xiaofei Ni
THTobias Hornig
Tobias Hornig
CSChristian Spieker
Christian Spieker
RGRalf Urs Giesen
Ralf Urs Giesen
MFMichael U. Fister
Michael U. Fister
The material parameters required to describe material behavior can change with the age of the components due to chemical and physical aging processes. The finite element method (FEM) is a tool for designing components for later use. The aim of this study is to correlate the change in the mechanical properties of silicone elastomers from standard tests over a longer period of time with the parameters of the Mooney–Rivlin model. To date, there are no publications on the development of the Mooney–Rivlin parameters of silicone elastomers over a storage period. For this purpose, the Shore A hardness, rebound elasticity, compression set and tensile properties were investigated over an aging period of approx. 200 days on two liquid silicone rubbers (LSRs) and one room-temperature-vulcanizing (RTV) silicone rubber. Depending on the silicone elastomer used, different trends in the characteristic values can be observed over the storage period. In general, increases in the Shore A hardness, rebound resilience and stress at a 100% strain with a decrease in the compression set can be determined. In addition to standard tensile tests, the material’s multiaxial behavior under tension was probed, and it was found that the similarly stress at a 100% strain increased. Finite element simulations verified the standard tensile test and corresponding Mooney–Rivlin model parameters. These parameters from the uniaxial tensile were validated in the multiaxial behavior, and the model’s accuracy in representing material properties and the influence of aging on the FEM simulation were affirmed.