The RAST-K v2, a novel nodal diffusion code, was developed at the Ulsan National Institute of Science and Technology (UNIST) for designing the cores of pressurized water reactors (PWR) and performing analyses with high accuracy and computational performance by adopting state-of-the-art calculation models and various engineering features. It is a three-dimensional multi-group nodal diffusion code developed for the steady and transient states using microscopic cross-sections generated by the STREAM code for 37 isotopes. A depletion chain containing 22 actinides and 15 fission products and burnable absorbers was solved using the Chebyshev rational approximation method. A simplified one-dimensional single-channel thermal-hydraulic calculation was performed with various values for the thermal conductivity. Advanced features such as burnup adaptation and CRUD modeling capabilities are implemented for the multi-cycle analysis of commercial reactor power plants. The performance of RAST-K v2 has been validated with the measured data of PWRs operating in Korea. Furthermore, RAST-K v2 has been coupled with a sub-channel code (CTF), fuel performance code (FRAPCON), and water chemistry code for multiphysics analyses. In this paper, the calculation models and engineering features implemented in RAST-K v2 are described, and then the application status of RAST-K v2 is presented.
This paper presents the steady state analysis of the Rostov-II benchmark using the conventional two-step approach. It involves the STREAM/RAST-K and CASMO-5/PARCS code systems. This paper documents a comprehensive code-to-code comparison between Serpent 2, CASMO-5, and STREAM at the lattice level for the different fuel assemblies (FAs) loaded in the Rostov-II core; and between Serpent 2, PARCS, and RAST-K at the core level in 2D. Finally, the 3D results of both deterministic models are compared to the steady state measurements of the Rostov-II benchmark. With respect to the measurements available in the Rostov-II benchmark, comparable accuracy (30 ppm difference in boron concentration, 2% assembly power) with an industrial calculation scheme (BIPR8) are reported up to 36.73 EFPDs. The calculations reported in the paper showed that the modeling of the resonance self-shielding in the lattice code as well as the geometrical modeling of the reflector are key for an accurate solution (reducing the in-out power tilt). At the core simulator level, a fairly crude 1D reflector model appears to be enough. Overall, this paper provides the detailed models and conditions used in STREAM/RAST-K and CASMO-5/PARCS, and accurate calculation solution for the Rostov-II benchmark with STREAM/RAST-K and CASMO-5/PARCS compared with measurement.