A promising method of obtaining mineral fiber fillers for dry building mixtures is the processing of waste that comes from the production of technogenic fibrous materials (TFM). The novelty of the work lies in the fact that, for the first time, basalt production wastes were studied not only as reinforcing components, but also as binder ones involved in concrete structure formation. The purpose of the article is to study the physical and mechanical properties of waste technogenic fibrous materials as additives for optimizing the composition of raw concrete mixes. To assess the possibility of using wastes from the complex processing of TFM that were ground for 5 and 10 min as an active mineral additive to concrete, their chemical, mineralogical, and granulometric compositions, as well as the microstructure and physical and mechanical characteristics of the created concretes, were studied. It is established that the grinding of TFM for 10 min leads to the grinding of not only fibers, but also pellets, the fragments of which are noticeable in the total mass of the substance. The presence of quartz in the amorphous phase of TFM makes it possible to synthesize low-basic calcium silicate hydrates in a targeted manner. At 90 days age, at 10–20% of the content of TFM, the strength indicators increase (above 40 MPa), and at 30% of the additive content, they approach the values of the control composition without additives (above 35 MPa). For all ages, the ratio of flexural and compressive strengths is at the level of 0.2, which characterizes a high reinforcing effect. Analysis of the results suggests the possibility of using waste milled for 10 min as an active mineral additive, as well as to give better formability to the mixture and its micro-reinforcement to obtain fiber-reinforced concrete.

For the first time, a comprehensive review of the literature data on the use of apricot (Prunus armeniaca) biomass components as a sorption material for the treatment of wastewater and environmental water from various pollutants is carried out in the present study. In addition to a comprehensive analysis of contemporary studies, the current work carried out its own microstructural and energy dispersive studies. It shows that apricot kernel shell is a promising raw material for obtaining sorption materials that can be used to extract various pollutants from aqueous media. The parameters of sorption interaction are presented, at which the highest rate of removal of pollutants was achieved. It is shown that the sorption capacity of apricot biomass components can be increased by modifying it with various chemical reagents, as well as other physical and physicochemical methods. We reveal that most publications consider the use of the latter as a raw material for the production of activated carbons. It is established that the surface area and total pore space of activated carbons from apricot kernel shells depend on the modes of carbonization and activation. It is shown that activated carbons are effective adsorbents for removing various pollutants (metal ions, dyes, oil and oil products) from aqueous media. It was found that the adsorption isotherms of pollutants in most cases are best described by the Langmuir and Freundlich models, and the process kinetics is most often described by the pseudo-second-order model. The possibility of improving the sorption characteristics of apricot biomass during chemical or physicochemical treatment is also shown.

The paper presents the review of scientific publications of world literature on the use of the larvae of black soldier fly ( Hermetia illucens) when feeding poultry. Nowadays, the issue of replacing traditional sources of protein when feeding poultry is very urgent, especially in connection with the global food crisis. Insects are the natural food of most birds; thus, the use of fly larvae for feed production has a biological basis. The research results presented in published works show that there are no negative effects on bird health and meat quality when feeding poultry, quail and other birds. In some cases, the experimental groups of birds gained weight slightly more slowly than the control group. Other reports indicate that birds grew at the same rate as normal birds. The quantity and quality of eggs did not differ significantly, but dietary changes affected the colour of yolks and eggshell. The effect of the addition of live larvae to the diet of young turkeys on the weight characteristics of was studied. Replacing 10% of the daily amount of feed with live Hermetia illucens larvae in the diet of turkeys showed that the daily feed intake and body weight gain of the experimental birds were significantly higher compared to the control groups, which led to a significantly higher body weight of chicks at the age of five weeks (2.19 kg vs. 2.015 kg, respectively) and a significantly lower feed conversion rate. Most researchers agree that replacing protein in poultry feed with insect flour should be partial, in the 15–30% range. Feeding with larvae that have undergone processing – grinding, chitin removing, heat treatment – is more preferable than using whole larvae, since the chitinous membrane makes larvae difficult to be digested in the digestive tract of birds.