Seismic pounding has taken place in several earthquake events since adjacent structures that lack adequate separation distance usually suffer from repetitive, severe collisions. These collisions result in considerable impact forces in addition to acceleration spikes, thus dealing damage to both structural and non-structural elements. So, a meaningful effort has been widely directed towards the investigation of that phenomenon, leading to a considerable number of publications that are related to that field of study. A review of these publications has thus become a matter of interest. Accordingly, this paper mainly aims to present a detailed state-of-the-art review concerned with seismic pounding between adjacent buildings. Firstly, general definitions, types, and causes of seismic pounding are addressed. Later, facts and statistics of historical earthquake incidents that reflect the scale of the threat caused by seismic pounding are clarified. Moreover, the effect of seismic pounding on fixed-base and base-isolated buildings is discussed. Furthermore, the effect of soil-structure interaction is also presented. Additionally, alternative mitigation methods for seismic pounding are presented. Their classification, types, efficiency, and applicability are also discussed. Eventually, different impact analytical models that can be used to simulate seismic pounding in theoretical studies are discussed. By the end of this paper, deficiencies in previous studies are clarified in order to be taken into account throughout future studies.
Soil profiles often exhibit both liquefiable and non-liquefiable layers; the impact of a confined liquefiable layer on seismic response remains a subject of ongoing research. This study investigates the influence of liquefaction on the seismic response of a free-field soil profile subjected to various earthquake excitations. The profile comprises liquefiable sand layers with different relative densities (35%, 55%, and 75%) confined with non-liquefiable clay layers. A non-linear dynamic analysis utilizing PLAXIS 2D and the PM4Sand model was employed to evaluate the liquefaction soil's response under seismic loading. The analysis reveals a frequency-dependent filtering effect exerted by liquefaction on earthquake waves. The soil's relative density plays a critical role, where lower densities promoting de-amplification across most frequencies, while higher densities can lead to selective de-amplification or even amplification within specific frequency ranges. Furthermore, the confining effect of the upper clay layer can elevate pore pressure ratios, potentially triggering liquefaction throughout the entire sand layer, resulting in reduced peak ground acceleration (PGA) compared to models without this layer. Moreover, excluding a clay crust resulted in smaller final displacements compared to those including one.
The need to reduce carbon emissions has recently become prevalent in light of concerns related to climate change. Since the cement industry causes approximately 8% of global CO2 emissions, it might be an urgent necessity to include cement replacement materials within the concrete industry. An important question arises about if such replacement negatively affects the cyclic or seismic behavior of reinforced concrete (RC) elements. This research presents an experimental investigation of the effect of using different percentages of metakaolin replacement on the monotonic and cyclic behavior of RC beams. The investigated parameters include the flexural strength, ductility and energy dissipation capacity of the tested beams. The current paper also aims to study the effect of using the CFRP-strengthening technique with 15% metakaolin replacement on the behavior of RC beams under the same loading protocols. The experimental results reveal that metakaolin can be used as a partial substitute for cement up to 20% without negative effect on the concrete behavior under both loading protocols. For cyclic loading, the percentage of replacement did not negatively affect the ductility; rather, it provided some improvement.