19 April 2025 in Innovative Infrastructure Solutions
Soil profiles often exhibit both liquefiable and non-liquefiable layers; the impact of a confined liquefiable layer on seismic response remains a subject of ongoing research. This study investigates the influence of liquefaction on the seismic response of a free-field soil profile subjected to various earthquake excitations. The profile comprises liquefiable sand layers with different relative densities (35%, 55%, and 75%) confined with non-liquefiable clay layers. A non-linear dynamic analysis utilizing PLAXIS 2D and the PM4Sand model was employed to evaluate the liquefaction soil's response under seismic loading. The analysis reveals a frequency-dependent filtering effect exerted by liquefaction on earthquake waves. The soil's relative density plays a critical role, where lower densities promoting de-amplification across most frequencies, while higher densities can lead to selective de-amplification or even amplification within specific frequency ranges. Furthermore, the confining effect of the upper clay layer can elevate pore pressure ratios, potentially triggering liquefaction throughout the entire sand layer, resulting in reduced peak ground acceleration (PGA) compared to models without this layer. Moreover, excluding a clay crust resulted in smaller final displacements compared to those including one.
6 October 2025 in Structures
23 November 2024 in Delta University Scientific Journal
The presence of liquefiable soil poses significant challenges for earthquake-resistant structure design. A substantial portion of previous research has overlooked soil-structure interactions in their analyses. However, during intense seismic activity, soil nonlinearity and separation at the soil-foundation interface can profoundly affect piled supported structures' response. Therefore, this study employs direct time-domain analysis to appropriately incorporate soil nonlinearity. A finite element model was developed using PLAXIS 2D under plain strain conditions. The PM4Sand model, renowned for simulating liquefaction behaviour in sand layers, was selected to represent the liquefiable layer. Nonetheless, the PM4Sand model has limitations in accurately capturing initial stress conditions. To address this, the Hardening Soil model with small-strain stiffness (HSS) was integrated for precise determination of initial stresses within the soil profile. The El Centro earthquake was used as the input ground motion. The findings are presented in terms of the pore water pressure ratio. The study reveals higher pore pressure ratios for piled-raft foundations compared to raft foundations alone. This distinction diminishes with increasing foundation depth, likely due to reduced inertial forces at greater depths. This observation underscores the crucial importance of accounting for soil-structure interaction in foundation analysis for structures situated on liquefiable soils.