Wagari Mosisa

Mr. Wagari Mosisa

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 July 2024 in Hydrology
Verified
Journal Article
Open access
PDF file
FTFayera Gudu Tufa
Fayera Gudu Tufa
FFFekadu Feyessa Fufa
Fekadu Feyessa Fufa
AKAdisu Befekadu Kebede
Adisu Befekadu Kebede
BGBeekan Gurmessa Gudeta
Beekan Gurmessa Gudeta
WMWagari Mosisa
Wagari Mosisa
Kristine WalraevensKristine Walraevens
Kristine Walraevens
Understanding the recharge–discharge system of a catchment is key to the efficient use and effective management of groundwater resources. The present study focused on the estimation of groundwater recharge using Soil Moisture Balance (SMB) and Baseflow Separation (BFS) methods in the Gilgel Gibe catchment where water demand for irrigation, domestic, and industrial purposes is dramatically increasing. The demand for groundwater and the existing ambitious plans to respond to this demand will put a strain on the groundwater resource in the catchment unless prompt intervention is undertaken to ensure its sustainability. Ground-based hydrometeorological 36-years data (1985 to 2020) from 17 stations and satellite products from CHIRPS and NASA/POWER were used for the SMB method. Six BFS methods were applied through the Web-based Hydrograph Analysis Tool (WHAT), SepHydro, BFLOW, and Automated Computer Programming (PART) to sub-catchments and the main catchment to estimate the groundwater recharge. The streamflow data (discharge) obtained from the Ministry of Water and Energy were the main input data for the BFS methods. The average annual recharge of groundwater was estimated to be 313 mm using SMB for the years 1985 to 2020 and 314 mm using BFS for the years 1986 to 2003. The results from the SMB method revealed geographical heterogeneity in annual groundwater recharge, varying from 209 to 442 mm. Significant spatial variation is also observed in the estimated annual groundwater recharge using the BFS methods, which varies from 181 to 411 mm for sub-catchments. Hydrogeological conditions of the catchment were observed, and the yielding capacity of existing wells was assessed to evaluate the validity of the results. The recharge values estimated using SMB and BFS methods are comparable and hydrologically reasonable. The findings remarkably provide insightful information for decision-makers to develop effective groundwater management strategies and to prioritize the sub-catchments for immediate intervention to ensure the sustainability of groundwater.

1 January 2022 in International Journal of Chemical Engineering
Verified
Journal Article
Open access
PDF file
WMWagari Mosisa
Wagari Mosisa
FFFekadu Feyessa Fufa
Fekadu Feyessa Fufa
DADidha Abera
Didha Abera
The study aimed to investigate the enhancement of biogas production through anaerobic digestion from blends of wastewater and microalgae. The microalgae functioned as a co‐substrate. A series of laboratory‐scale batch anaerobic co‐digestion of the wastewater and microalgae were carried out under mesophilic conditions for 21 days. Biogas production rates from wastewater (WW) alone and different blends of WW and microalgae (MA) were analysed. In addition, the nutrient values and reduction in the volume of the WW after digestion were determined. The results show that the quantity and quality of biogas produced with different mix ratios of WW to MA (WW only, 3 : 1, and 3 : 2) were 24 mL CH 4 /g COD, 37 mL CH 4 /g COD, and 44 mL CH 4 /g COD, respectively. At the optimum mix ratio, the optimum methane produced was 44 mL CH 4 /g COD, which is much lower than volumes of gas STP conditions, which is 350 mL CH 4 /g COD. The values of TS, VS, and COD were also reduced by 43.11%, 40.09%, and 71.99% at the optimum mix ratio, respectively. The optimum mix ratio of 1732.77, 77.14, and 174.26 kg/year of urea, diammonium phosphate, and potash fertilizer, respectively, was obtained. The results indicate that biogas production can be improved through co‐digestion of WW and MA as a co‐substrate relatively, but to improve the production rate another substrate should be investigated. However, the result can be used as a supplementary investigation for practical application in energy production.

23 October 2025 in Water
Verified
Journal Article
Open access
PDF file
AKAdisu Befekadu Kebede
Adisu Befekadu Kebede
FTFayera Gudu Tufa
Fayera Gudu Tufa
WMWagari Mosisa
Wagari Mosisa
BGBeekan Gurmessa Gudeta
Beekan Gurmessa Gudeta
SKSeifu Kebede
Seifu Kebede
Kristine WalraevensKristine Walraevens
Kristine Walraevens
The sustainable use and management of groundwater resources is a challenging issue due to population growth and climate change. Accurate quantification of groundwater recharge is a basic requirement for effective groundwater resource management, yet it is still lacking in many areas around the world. The study was designed to estimate recharge to groundwater from natural rainfall in the Gilgel Gibe and Dhidhessa catchments in southwestern Ethiopia, employing the water table fluctuation (WTF) and chloride mass balance (CMB) techniques. These methods are being applied for the first time in the study area and have not previously been used in these catchments. Given the region’s data scarcity, a community-based data collection program was implemented and supplemented with additional field measurements and secondary data sources. Groundwater level, spring discharge, and rainfall were monitored over the 2022/2023 hydrological year. Groundwater level fluctuations were found to be influenced by topography and rainfall patterns, reaching 8.2 m in amplitude in the upstream part of the catchments. Chloride concentrations were determined in groundwater samples collected from hand-dug wells and springs, and rainwater was also collected. Rainwater exhibited a mean chloride concentration of 2.46 mg/L, while groundwater chloride concentrations ranged from 3 mg/L to 36.99 mg/L. The estimated recharge rates varied spatially, ranging from 170 to 850 mm/year using the CMB method (11% to 55% of annual rainfall, mean recharge rate of 454 mm/year) and from 76 to 796 mm/year using the WTF method (4% to 43% of annual rainfall, mean recharge rate of 439 mm/year). Notably, recharge estimates were lowest downstream in the lowland areas and highest upstream in the highland regions. Rainfall amount, local lithology, and topography were identified as major influences on groundwater recharge across the study area. Both CMB and WTF methods were deemed applicable in the volcanic aquifers, provided that all the respective assumptions are followed. This study significantly contributes to the groundwater dataset for the region, in addition to recharge estimation and the research conclusions, emphasizing the importance of long-term monitoring and time series analysis of chloride data to reduce uncertainties. The work serves as a valuable reference for researchers, policymakers, and regional water resource managers.

2 December 2024 in Water
Verified
Journal Article
Open access
PDF file
WMWagari Mosisa
Wagari Mosisa
AKAdisu Befekadu Kebede
Adisu Befekadu Kebede
FTFayera Gudu Tufa
Fayera Gudu Tufa
BGBeekan Gurmessa Gudeta
Beekan Gurmessa Gudeta
ABAlemu Yenehun Beyene
Alemu Yenehun Beyene
Kristine WalraevensKristine Walraevens
Kristine Walraevens
The sustainable management of groundwater in the Jimma area is complicated by a lack of comprehensive studies on its chemical makeup and the geochemical processes influencing its hydrochemistry. This research aims to fill that gap by examining 51 groundwater samples from various sources, including deep groundwaters, shallow groundwaters, hand-dug well groundwaters, surface waters, and springs within the area primarily consisting of complex volcanic rocks. The goal is to describe the hydrogeochemical characteristics and determine the key processes affecting groundwater composition in this volcanic area. The study identifies clear patterns in cation and anion concentrations. For deep groundwaters, the average cation concentration is ranked as Na+ > Ca2+ > Mg2+ > K+, while shallow groundwaters, hand-dug well groundwaters, surface waters, and springs show a ranking of Ca2+ > Na+ > Mg2+ > K+. The major anions are typically ordered as HCO3− > NO3− > Cl− > SO42−. The quantitative hydrogeochemical analysis indicates that the freshwater types in the region are primarily Ca-HCO3 and Ca-Mg-HCO3, with some highly mineralized Na-HCO₃ waters also detected. The weathering of silicate minerals mainly drives the geochemical processes affecting groundwater chemistry. An increase in mineralization, suggested by saturation indices, points to a longer residence time underground, with deep groundwaters exhibiting the highest saturation levels and springs the lowest. This mineralization is especially significant for Mg-silicates and carbonates. Stability diagrams for feldspar minerals further demonstrate groundwater evolution along flow paths, revealing that shallow systems are in equilibrium with minerals like gibbsite, whereas deeper systems achieve stability with albite, Ca-montmorillonite, and microcline. Higher CO2 levels (10−1.5 to 100.5 atm), likely from mantle-magma degassing, add more HCO3− to the deeper aquifers. This study offers the first thorough characterization of the groundwater composition in the Jimma area and provides important insights into the Jimma area’s hydrogeochemical development, establishing a basis for enhanced groundwater management within this intricate volcanic aquifer system.

1 August 2026 in Water
Verified
Journal Article
Open access
PDF file
AKAdisu Befekadu Kebede
Adisu Befekadu Kebede
FTFayera Gudu Tufa
Fayera Gudu Tufa
WMWagari Mosisa
Wagari Mosisa
BGBeekan Gurmessa Gudeta
Beekan Gurmessa Gudeta
SKSeifu Kebede
Seifu Kebede
Kristine WalraevensKristine Walraevens
Kristine Walraevens
Groundwater is a critical resource for domestic, agricultural, and industrial use in the Gilgel Gibe and Dhidhessa catchments of southwestern Ethiopia, where volcanic aquifer systems are the main sources. However, groundwater quality in these catchments has been under pressure from anthropogenic activities such as population growth, land-use changes, and pollution driven by rapid development and poor resource management. This study investigates hydrogeochemical processes and evaluates groundwater quality in volcanic aquifers using hydrochemical analyses and a stable isotope approach applied to 115 water samples. The spatial distribution of various physicochemical and hydrogeochemical parameters shows a distinct contrast between the highland and lowland regions, indicating topography-driven variations in water quality and geochemical processes. In hand-dug wells, springs, and surface waters, the ionic order is Ca2+ > Na+ > Mg2+ > K+ and HCO3− > NO3− > Cl− > SO42−, whereas deep wells show Na+ > Ca2+ > Mg2+ > K+ and HCO3− > Cl− > SO42− > NO3−. The predominant groundwater type is Ca-HCO3, followed by Na-HCO3 and Ca-NO3, with other types including Ca-Mg-HCO3, Ca-Na-HCO3, and Na-Ca-HCO3. Water types of Ca-HCO3 and Ca-Mg-HCO3 dominate the upland areas, indicating relatively young groundwater with moderate total dissolved solids (TDSs) and enrichment in δ18O and δ2H, where highly mineralized Na-HCO3 water types prevail in the deep aquifers of the lowland regions, where δ18O and δ2H are relatively depleted. Principal component analysis, cross-plots of major cations versus HCO3−, and mineral stability diagrams indicate that aluminosilicate weathering and dissolution are the dominant processes controlling groundwater chemistry in the study area. The higher saturation index values observed in the deep wells indicate water closer to mineral equilibrium, suggesting more extended water–rock interaction relative to the shallow wells. The CO2 partial pressures calculated using PHREEQC exceed atmospheric levels (~10−3.5 atm), indicating sources from atmospheric influx, soil, or biogenic activity for most samples, and deeper sources such as mantle degassing may be found in a few deep wells. Scatter plots of Cl− vs. SO42− and Cl− vs. NO3−, associated with Ca(NO3)2, NaNO3, and CaCl2 water types, suggest that anthropogenic inputs are the second major factor influencing the area’s water chemistry. Stable isotope analyses and hydrochemical data indicate that groundwater in the area primarily originates from local precipitation, with isotopic signatures reflecting strong groundwater–surface water interaction. These findings improve understanding of regional hydrogeochemistry and groundwater quality and help identify promising zones for sustainable groundwater development. This study provides valuable insights into groundwater resource management both in the study area and in regions sharing comparable geological contexts.

16 April 2026 in Water Practice & Technology
Verified
Journal Article
Open access
WMWagari Mosisa
Wagari Mosisa
LMLelisa Regea Mengistu
Lelisa Regea Mengistu
FAFiromsa Bidira Abdi
Firomsa Bidira Abdi
Three-panel flowchart of a stochastic reliability framework. Left: Hospital wastewater treated with OPP/PS coagulant under ±9%–10% operational uncertainty. Center: Monte Carlo simulation (10,000 iterations). Right: Reliability results: BOD 99.9%, TDS/turbidity/color ~100%, COD 81.9%. Dosage is the critical control parameter Hospital wastewater is complex and hazardous, containing a mixture of pathogens, organic matter, and micropollutants, which calls for treatment solutions that are both robust and sustainable. This study explores a novel, eco-friendly biomineral coagulant, composed of an equal blend of orange peel powder (OPP) and pumice substrate (PS), as a promising alternative to conventional chemical coagulants. Moving beyond traditional optimization approaches, we developed a stochastic framework to assess the reliability of treatment performance under real-world variability. Using response surface methodology to model the system, a Monte Carlo simulation with 10,000 iterations was employed to propagate uncertainties in input factors, dosage variation of ±9%, and mixing and settling times of ±10%, through to the treatment outcomes. The results highlight the high effectiveness and reliability of the OPP/PS system. Probabilities of meeting strict performance targets were 81.9% for chemical oxygen demand (>80%), 99.9% for biochemical oxygen demand (>75%), and 100% for total dissolved solids (>80%), turbidity (>94%), and color (>90%). Sensitivity analysis further revealed that coagulant dosage is the most critical factor governing process stability, emphasizing the need for precise control. This research provides a data-driven basis for implementing a sustainable, waste-derived treatment, giving confidence in scale-up and operational reliability.