This study evaluated the effect of carbon nanofibers (CNFs) coated by aluminum oxide Al2O3 as a reinforcement on compressive strength, frost resistance, and drying shrinkage of cement mortars. Three weight ratios of 0.125%, 0.25%, and 0.5% of Al2O3/CNFs and bare CNF cement mortars were compared with reference cement mortar samples. The reactive porous and high surface area layer of alumina induced the hydration reaction and promoted the production of well-distributed hydration gel. Derivative thermal analysis–differential thermogravimetric (TGA-DTG) and X-ray powder diffraction (XRD) characterization showed that Al2O3/CNFs reinforcement led to greater hydration gel production than bare CNFs. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) were performed to study the coating and microstructure of the cement mortars evaluated in this paper. The results show that the optimum enhancement of the cement mortar properties was obtained at ratios of 0.125% for Al2O3/CNFs and 0.25% for CNFs. This enhancement was greater with Al2O3/CNFs-reinforced specimens in terms of high compressive strength, less compressive strength degradation after 150 cycles, and less drying shrinkage. The low use of the CNFs in Al2O3/CNFs samples indicates the coating is an economical and promising approach for improving the performance of cement mortars.
This study evaluates the signal reliability and electromechanical tracking stability of carbon-nanomaterial-reinforced self-sensing cementitious sensors (SSCs) under severe environmental degradation. While embedded piezoresistive sensors offer high potential for structural health monitoring (SHM), real-world deployment requires quantified boundaries for long-term measurement drift. We systematically analyze gauge factor (GF) stability, baseline resistance repeatability, and signal-to-noise resilience of multiple sensor topologies under dynamic compressive and flexural loading. The sensors incorporate a primary carbon black (CB) matrix hybridized with graphene nanoplatelets (GNPs), carbon nanofibers (CNFs), or multi-walled carbon nanotubes (CNTs). Experimental data reveal that hybrid systems with 5% CB coupled with either 1% GNPs, 0.2% CNFs, or 0.2% CNTs by weight demonstrate superior sensitivity compared to single-filler baseline networks. The pristine hybrid CB/CNTs configuration achieved an initial compression GF of 68.3, while the CB/CNFs configuration yielded a flexural GF of 71.6. After freeze-thaw exposure, hybrids maintained sensing functionality up to 150 cycles under compression due to nanofiller bridging, whereas CB-only sensors rapidly degraded. Under flexural tracking, the CB/CNFs and CB/CNTs network topology degraded consistently up to 100 thermal cycles, whereas CB and CB/GNPs configurations failed earlier. Furthermore, post-exposure drying at 60°C for 24 hours preserved conductive path integrity, whereas a 95°C protocol introduced differential thermal expansion that disrupted the sensor network topology and skewed data acquisition. By elucidating freeze-thaw-induced degradation mechanisms across different SSCs, this study provides strategic recommendations to enhance the long-term durability of self-sensing composites in infrastructure.