The article presents the possibilities of using fiber-optic acceleration (FOC) sensors on products of rocket-space and aviation technology as part of information-measuring systems. A special measuring device has been developed for experimental confirmation of the main characteristics of the technical characteristics of the developed, two-coordinate fiber-optic acceleration sensors. The developed measuring setup for the experimental research of a two-coordinate fiber-optic acceleration sensor with two, cylindrical lenses fixed on two H-shaped elastic elements deflected under the influence of acceleration in two mutually perpendicular directions X and Y, intended for operation in harsh conditions of rocket and space technology. The experimental equipment consists of the developed setup for setting micromovements and an information conversion unit, including modules for signal conversion, transmission, power supply, signal amplification, and indication. Experimental dependences of the output voltage from the information conversion unit’s output on the micro-displacement in the range corresponding to the micro-displacements of the inertial mass with a cylindrical lens under acceleration in the range of ±100 m/s2 were obtained on the micro-displacement setting unit. The maximum value of the linearity error of the prototype acceleration sensor together with the information conversion unit was 0.07%. The conversion sensitivity of a two-coordinate fiber-optic acceleration sensor per the experimental dependences obtained on the Data Physics LE-612 MST/DSA 10–40 k vibration stand when exposed to sinusoidal vibration with an acceleration amplitude from 2 to 10 g in the frequency range from 5 to 2560 Hz was, on average, 3 mV/m/s2. The conducted experimental research confirms the performance of experimental samples of fiber-optic acceleration sensors together with an information conversion unit, as well as the achievement of high metrological characteristics.
1 January 2022 in Models, systems, networks in economics, technology, nature and society
Background. Currently, during the construction of new nuclear power plants (NPP), its service life has been extended to 60 years, which requires the modernization of information and measurement systems that control many parameters of the dome of the NPP, including temperature parameters. The safety of the NPP as a whole depends on the accuracy of measuring the temperature of the cement base of the dome of the NPP. The measuring instruments used should not create additional electromagnetic interference during measurements, therefore, the use of fiber-optic measuring instruments is considered more preferable. The object of the study is a fiber-optic information and measurement system (FOIMS) of the stress-strain state of the protective shell of the NPP. The subject of the research is scientific and technical solutions of fiber-optic temperature sensors (FOTS) with a compensation channel, which are part of the nuclear power plant protective shell, installed in rigid deformable environments. The purpose of the study is to develop constructive, technological and structural solutions of the FOTS, providing the possibility of its application in rigid deformable environments with minimal dynamic error due to inertial processes in the sensor housing. Materials and methods. The main approach to achieve this goal is to adapt the previously developed technical solutions of the FOTS to the measurement conditions in rigid deformable media, which are the supporting parts of the dome of the NPP. Results. The structure is determined and the design of the FOTS with a compensation channel of the reflective type is developed. The relations between the coefficients of thermal expansion of the materials from which the structural elements of the FOTS are made, providing a reduction in the deformation of the protective housing and the sensitive element of the FOTS when the temperature changes, are determined. The initial distance between the mirror surface and the ends of the optical fibers located opposite the mirror surface, at which the sensor conversion function is linear, and the maximum sensitivity (up to 30%) and the modulation depth of the optical signal conversion (up to 50%) are determined. Conclusions. The design, technological and structural solutions of the FOTS with a reflective type compensation channel for the FOIMS of the protective shell of NPP placed in rigid deformable environments have been developed. The use of the developed fiber-optic temperature sensor will provide: reduction of internal stresses inside the deformable environment of the protective shell when its temperature changes; reduction of the dynamic error of temperature measurement; increase in the accuracy of measuring the temperature of the protective shell.
1 January 2021 in Models, systems, networks in economics, technology, nature and society