Cellular agriculture could represent a more sustainable alternative to current food and nutraceutical production processes. Tisochrysis lutea microalgae represents a rich source of antioxidants and omega-3 fatty acids essential for human health. However, current downstream technologies are limiting its use. The present work investigates mild targeted acoustic treatment of Tisochrysis lutea biomass at different growth stages and acoustic frequencies, intensities and treatment times. Significant differences have been observed in terms of the impact of these variables on the cell disruption and energy requirements. Lower frequencies of 20 kHz required a minimum of 4500 J to disrupt 90% of the cells, while only 1000 J at 1146 kHz. Comparing these results with current industry standards such as bead milling, up to six times less energy use has been identified. These mild biomass processing approaches offer a certain tunability which could suit a wide range of microorganisms with only minor adjustments.
Microalgae can provide a more sustainable alternative to traditional food systems which are dominated by terrestrial crops. The main economic challenges, however, relate to the downstream processing of microalgae and the valorization of their side streams. The present work explores the scientific principles and data required to develop an integrated biorefinery-on-a-chip, which replaces many of the common downstream processing unit operations by employing acoustic fields. The acoustic parameters of Tisochrysis lutea microalgal cells and their cell components are determined using the neutrally buoyant state method. Culture conditions which result in a high carbohydrate or high protein to lipid ratio led to a higher acoustic contrast factor than culture conditions favoring a high composition of lipids. The collected acoustic data is used as input in a numerical model which studies the harvesting of microalgal cells and the fractionation of microalgal cell components. High separation levels are achieved based on the size and composition of microalgal cells and the type of cell component. Subsequent studies are envisioned to determine the practical feasibility of applying these concepts and even scaling them out. Nevertheless, this study represents a steppingstone towards a novel, label-free approach to processing microalgal cells of different biomass compositions.
The red seaweed Palmaria palmata is a promising source for alternative proteins. Development of mild and novel biorefinery approaches are needed for green processes yielding functional proteins. Process intensification using ultrasound-assisted unit operations can be an effective strategy to circumvent current seaweed biorefinery challenges, in particular limited protein extraction yields. In this research, first, effects of acoustic cavitation (AC) during ultrasound-assisted extraction (UAE) were studied using a multifactorial design of experiments for total protein and R-phycoerythrin (RPE) extraction from P. palmata. Secondly, novel enzyme-assisted high-frequency ultrasonic extraction (EAUE) was developed following the same approach and responses. Contrary to the traditional acoustic cavitation process, this intensification strategy allows a milder extraction of proteins from the recalcitrant P. palmata harnessing combined effects of acoustic irradiation and enzymes. Validation experiments showed the robustness of developed models. Maximum RPE yields were 2.6 mg/gdw for both approaches. However, maximum total protein extraction efficiencies were 13.6% when applying acoustic cavitation and increased to 36.0% under high-frequency acoustic irradiation together with the Viscozyme® L enzyme preparation. Moreover, intensification phenomena were observed during EAUE and an increased extraction yield in comparison to traditional enzymatic processes (EAE). We hypothesize the synergistic effect observed is due to acoustic fields improving cell wall disentanglement and enhancing enzyme-substrate interactions. The present study provides insights into the use of ultrasound for protein extraction of P. palmata and introduces, to the best of our knowledge, for the first time EAUE as process intensification strategy of seaweed biorefinery processes.
Microbial biotechnology generates functional ingredients for food, feed, nutraceutical, therapeutic, and cosmetic applications. However, extracting and purifying these compounds in their native form remains a challenge due to the harshness of current approaches, as well as their high economic and environmental costs. To enable these technologies, a complete rethink of downstream processing is required. Using external fields, cold plasma, and supercritical fluids, biomass processing could be simplified and intensified. Despite progress, a clear understanding and overview of the strengths and weaknesses of these technologies are lacking. The present review highlights the potential of these technologies, as well as their limitations, while proposing new strategies to overcome these and advance the next generation of multiproduct microbial and microalgal biorefineries.
3D printers are becoming common household and laboratory appliances thanks to the possibility of producing physical objects in a short time, at low cost, low waste and tailored to the needs of each user. One of the most widely used types of 3D printers is the stereolithography SLA or the masked stereolithography (m)SLA, which uses light to photo crosslink a liquid resin to solid objects layer by layer. 3D printable resins consist of numerous components, with the biggest part consisting of usually methacrylates or acrylates. However, contrary to the trend of reducing plastic consumption, the methacrylates used for SLA resins are mainly petroleum derivatives. Bio-based options made with soybean oil have become commercially available in the last few years. These oils are not very sustainable as soybeans have a high demand for land and water use, and there is competition for using soy as food/feed or for materials. In contrast to soybeans, microalgae have simple nutrient requirements and do not need arable land or freshwater, excluding them from competition with crops. They also have a high CO₂ fixation and can produce and store a high oil content of up to 75% by biomass weight, which can be used for the production of the resin. Here, we show how to produce 3D printable resins based on microalgal oil. Starting from a commercial microalgal oil, we perform epoxidation and methacrylation reactions on it to obtain reactive groups usable for polymerization. Subsequently, we formulated an SLA resin that we 3D printed and analyzed the mechanical performance.