1 December 2023 in Biomicrofluidics
Acoustic manipulation of particles in microchannels has recently gained much attention. Ultrasonic standing wave (USW) separation of oil droplets or particles is an established technology for microscale applications. Acoustofluidic devices are normally operated at optimized conditions, namely, resonant frequency, to minimize power consumption. It has been recently shown that symmetry breaking is needed to obtain efficient conditions for acoustic particle trapping. In this work, we study the acoustophoretic behavior of monodisperse oil droplets (silicone oil and hexadecane) in water in the microfluidic chip operating at a non-resonant frequency and an off-center placement of the transducer. Finite element-based computer simulations are further performed to investigate the influence of these conditions on the acoustic pressure distribution and oil trapping behavior. Via investigating the Gor’kov potential, we obtained an overlap between the trapping patterns obtained in experiments and simulations. We demonstrate that an off-center placement of the transducer and driving the transducer at a non-resonant frequency can still lead to predictable behavior of particles in acoustofluidics. This is relevant to applications in which the theoretical resonant frequency cannot be achieved, e.g., manipulation of biological matter within living tissues.
16 February 2025 in Ultrasonics Sonochemistry
Microalgae can provide a more sustainable alternative to traditional food systems which are dominated by terrestrial crops. The main economic challenges, however, relate to the downstream processing of microalgae and the valorization of their side streams. The present work explores the scientific principles and data required to develop an integrated biorefinery-on-a-chip, which replaces many of the common downstream processing unit operations by employing acoustic fields. The acoustic parameters of Tisochrysis lutea microalgal cells and their cell components are determined using the neutrally buoyant state method. Culture conditions which result in a high carbohydrate or high protein to lipid ratio led to a higher acoustic contrast factor than culture conditions favoring a high composition of lipids. The collected acoustic data is used as input in a numerical model which studies the harvesting of microalgal cells and the fractionation of microalgal cell components. High separation levels are achieved based on the size and composition of microalgal cells and the type of cell component. Subsequent studies are envisioned to determine the practical feasibility of applying these concepts and even scaling them out. Nevertheless, this study represents a steppingstone towards a novel, label-free approach to processing microalgal cells of different biomass compositions.
26 April 2024 in Advanced Intelligent Systems
In nature, wind can transport objects of diverse shapes and materials over long distances spanning meters or beyond. In contrast, most noncontact manipulation methods are effective only over centimeter‐scale distances and require the manipulated objects to have specific magnetic, electrical, or other material properties and shapes. Herein, a meter‐scale distance manipulation method is presented for controlling the motion of objects of diverse shapes and materials on a plane surface using a jet‐induced airflow field. The airflow field is varied by controlling the direction of a single air jet projected onto a surface based on the positions of objects to steer the objects to follow desired trajectories up to 2.7 m away. A wide variety of objects can be automatically manipulated, from regularly shaped polystyrene hemispheres and sticks to irregularly shaped cotton wads and face masks as well as deformable tissue papers and plastic bags. The method is also robust, effectively manipulating objects under challenging conditions, e.g., external airflow disturbances, surface obstacles, and air–water interface. Finally, three application cases are demonstrated: collecting diverse objects into a target receptacle, hooking and retrieving heavy objects with a tethered mobile agent, and closing an electrical circuit with an untethered soft agent.