The pyrolysis of four pairs of raw and acid-washed coals under N2 atmosphere was carried out in a drop tube reactor at 1250 °C. The results show that both organic structures and metal elements have an important influence on the formation of soot. The total area of aromatic and aliphatic hydrogen absorption bands is positively correlated with soot yield. Aromatic compounds have a greater contribution to soot and tar formation. The absorption band area of oxygen structures in coal FTIR spectra is negatively correlated with the soot conversion rate of tar. During pyrolysis, metal substances in coal can catalyze the dehydrogenation and deoxygenation of tar, reduce the content and stability of the aliphatic compound, and catalyze aromatic ring rupturing. More importantly, gasified metals can inhibit the polymerization reaction of aromatic compounds.
In this work, two series of brown coals (including acid-washed coal and ion-exchangeable Na-loaded coal) were pyrolyzed in a drop-tube reactor. The experimental results revealed that soot and tar yields of Na-loaded coals were significantly lower than that of acid-washed coals. Gasified Na can reduce the formation of big soot agglomerates. During coal primary pyrolysis, ion-exchangeable Na can reduce the amount and aromaticity of primary tar. Na released with volatiles can catalyze the cracking of aliphatic and aromatic compounds, inhibit the polymerization between aromatic rings, and promote the combination of soot/tar with oxygen-containing substances, resulting in the decrease of graphite crystallite size and the increase of amorphous carbon content. Na can also reduce the organization degree of soot by forming intercalation compounds.
27 February 2025 in ACS Sustainable Chemistry & Engineering
Low power density and low heating rate are the key constraints for the development of conductive polymer materials in the field of electric heating. The carbon nanotubes (CNTs)–graphene (GR)–polydimethylsiloxane (PDMS) composite film was prepared by vacuum filtration and spin coating to solve the problem in this study. Moreover, an AC electric field was used to orient the CNTs to enhance the electrothermal performance. The structure and properties of composite films were analyzed. The results show that the composite film with CNT:GR = 2:1 has the lowest permeation threshold, and can heat up within 30 s and stabilize at 260 °C at 10 V. The electric field-oriented CNTs reduced the insulating polymer layer, increasing the heating rate of the composite film by 1.2 times, and increasing the theoretical thermal conductivity. The flexible electrothermal composite film prepared in this study can be used in thermal insulation, deicing, and wearable electronic devices.