Magnetic flux leakage (MFL) testing is widely used in non-destructive testing of ferromagnetic components. In view of the serious attenuation of the leakage magnetic field (LMF) caused by the transmission of LMF in the lift-off layer between the measuring point and the workpiece, this paper introduces an MFL detection method based on the slotted ferromagnetic lift-off layer (SFLL). The conventional non-ferromagnetic lift-off layer is changed to a ferromagnetic lift-off layer with a rectangular slot. The magnetic sensor is fixed above the slot and scans the workpiece together with the lift-off layer. First, the detection mechanism of the new method was studied by an equivalent LMF coil model. The permeability perturbation effect and the magnetization enhancement effect were analyzed in the new method. Based on the detection mechanism, the lift-off tolerance of the new method was investigated. Then, the LMF enhancement and lift-off tolerance of the new method in the steel plate detection model were studied. Finally, experiments were conducted to compare the new method with the conventional method. The simulation and experimental results show that the slotted ferromagnetic lift-off layer enhances the amplitude of the MFL signal and is tolerant to the lift-off value. This method provides a new idea for optimizing the design of the MFL sensor and improving the sensitivity of MFL detection at a large lift-off value.
Thick-walled steel pipes, which bear high internal pressure, are widely applied in nuclear power and pressure pipelines. If there are defects in the inner wall, they are easy to expand and cause accidents. Therefore, the thick-walled steel pipe must be subject to non-destructive testing after production. For the magnetic flux leakage (MFL) testing method, the detection sensitivity gradually decreases with the increase of wall thickness. To solve this problem, a new structure of MFL probe is proposed in this paper. The influence of the iron core permeability on the MFL signal is analyzed theoretically, and the effect of the core length and diameter on the MFL signal is analyzed by simulation. The variation of the MFL signal with the change of the iron core and coil lift-off is studied respectively. The simulation results are verified by experiments. It is found that the lift-off of the iron-cored coil is determined by the iron core position. Based on this phenomenon, an MFL array probe is designed, which can be used for online detection of thick-walled steel pipes to improve the detection sensitivity of inner wall defects.
Hi-lock bolt fasteners are widely used in aircraft multi-layer structures, and it is especially important to detect hole edge defects of hi-lock bolt connection structures. In this study, an array remote field eddy current testing system based on FPGA(Field Programmable Gate Array) and an array remote field eddy current testing probe based on multiplexing the principle were designed and developed. Using this system, experiments were carried out on fastener test blocks, and the effects of defect length and buried depth on the detection signal were studied. The experimental results show that the defect length has a significant impact on the amplitude of the detection signal, but a small impact on the phase of the detection signal. The buried depth of a defect has a significant impact on the amplitude and phase of the defect signal. The attenuation law of the detection signal in the weak magnetic field region between channels was studied, and a rotation angle-w model was proposed. The model was used to locate the defect, and the detection signal when the defect was located directly below the coil was deduced. A method for defect evaluation using the phase and amplitude of the defect signal was proposed. It was verified that the defect location error was within 2°, and the positioning error was small, which provided a reference for the defect evaluation of array remote field eddy current.
18 December 2025 in IEEE Transactions on Instrumentation and Measurement
Magnetic flux leakage testing methods have been extensively used to detect defects in ferromagnetic materials. However, variations in the thickness of the surface paint layers or wax deposition can lead to unknown lift-off, which results in significant depth quantification errors. To address the challenge of quantifying the depths of internal or external defects under unknown lift-off conditions, this study introduces a new evaluation method based on time-domain features. Theoretical analysis combining the magnetic field phase reversal phenomenon and the magnetic shielding effect reveals why the rising time of the internal defect signals remains unaffected by lift-off. The simulation results verified the insensitivity of the time features to lift-off. In this experiment, a cross-correlation algorithm was used to align different datasets. Wavelet analysis was employed to extract the rising time points, and a linear regression algorithm was applied to establish a depth quantification model under varying lift-off conditions. Finally, the validation of the pipeline samples demonstrated that the depth quantification error for defects under unknown lift-off conditions did not exceed 13%.