For over a century, enzyme immobilisation has been proven to be a superior strategy to improve catalytic activity and reusability and ensure easy separation, easy operation, and reduced cost. Enzyme immobilisation allows for an easier separation of the enzyme from the reaction mixture, thus simplifying downstream processing. This technology protects the enzyme from degradation or inactivation by harsh reaction conditions, making it more robust and suitable to be used in various applications. Recent strategies of immobilisation methods, such as adsorption, cross-linking, entrapment or encapsulation, and covalent bonding, were critically reviewed. These strategies have shown promising results in improving enzyme stability, activity, and reusability in various applications. A recent development in enzyme immobilisation in nanomaterials and agrowaste renewable carriers is underlined in the current review. Furthermore, the use of nanomaterials and agrowaste carriers in enzyme immobilisation has gained significant attention due to their unique properties, such as high surface area, high mass transfer, biocompatibility, and sustainability. These materials offer promising outcomes for developing more efficient and sustainable immobilised enzymes. This state-of-the-art strategy allows for better control over enzyme reactions and enhances their reusability, leading to more cost-effective and environmentally friendly processes. The use of renewable materials also helps to reduce waste generation and promote the utilisation of renewable resources, further contributing to the development of a circular economy.
The prospect of synthesizing biochar from agricultural wastes or by-products to utilize them as a promising adsorbent material is increasingly gaining attention. This research work focuses on synthesizing biochar from castor biomass (CBM) and evaluating its potential as an adsorbent material. Castor biomass-based biochar (CBCs) prepared by the slow pyrolysis process at different temperatures (CBC400 °C, CBC500 °C, and CBC600 °C for 1 h) was investigated for the adsorption of textile dye effluents (safranin). The pyrolysis temperature played a key role in enhancing the morphology, and the crystallinity of the biochar which are beneficial for the uptake of safranin. The CBC600 adsorbent showed a higher safranin dye removal (99.60%) and adsorption capacity (4.98 mg/g) than CBC500 (90.50% and 4.52 mg/g), CBC400 (83.90% and 4.20 mg/g), and castor biomass (CBM) (64.40% and 3.22 mg/g). Adsorption data fitted better to the Langmuir isotherm model than to the Freundlich isotherm model. The kinetics of the adsorption process was described well using the pseudo-second-order kinetic model. The study on the effect of the contact time for the adsorption process indicated that for CBC600, 80% dye removal occurred in the first 15 min of the contact time. After three regeneration cycles, CBC600 exhibited the highest dye removal efficiency (64.10%), highlighting the enhanced reusability of CBCs. The crystalline patterns, functional binding sites, and surface areas of the prepared CBCs (CBC400, CBC500, CBC600) were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, and Brunauer–Emmett–Teller surface area measurements, respectively.
1 April 2021 in Journal of Sol-Gel Science and Technology
Tannic acid or tannin, type of phenolic compound contains in kenaf bast fibre. Conventional extraction has certain limitations in terms of time, energy, and solvent consumption. Ultrasound assisted extraction (UAE) can extract bioactive components in shorter time, low temperature, with lesser energy and solvent requirement. UAE as alternative extraction technique is better equipped to retain the functionality of the bioactive compounds. In this study, the conditions for ultrasound assisted extraction (UAE) of tannic acid from kenaf bast fibre by assessing the effect of sonication time and different duty cycles were optimized. The use of ultrasound to extract tannic acid from kenaf bast fiber was evaluated. Ultrasound-assisted extraction (UAE) was carried out using ethanol as solvent to intensify the extraction efficacy. Phytochemical screening was conducted to identify the presence of tannic acid in extracts. The extracts then were analyzed using High-Performance Liquid Chromatography (HPLC) and Scanning Electron Microscopy (SEM). It was found that 0.2429 mg/mL of tannic acid was obtained under the extraction conditions of extraction temperature of 40℃, sonication time of 20 minutes and duty cycle of 50%. From SEM analysis, it was found that the raw sample demonstrated rough surface and no porous but kenaf bast fibre display smoother surface with less impurities and few pores appeared after the extraction process using UAE. These results indicate that ultrasound-assisted extraction is an efficient method for extracting tannic acid from kenaf bast fibre with the advantages of lower extraction time and higher extraction yield.