Airborne LiDAR is a popular measurement technology in recent years. Its feature is that it can quickly acquire high precision and high density 3D point coordinates on the surface. The reflective waveform of the radar contains the geometric structure and roughness of the surface reflector. Combined with the information from aerial photographs, it can quickly help users to interpret various surface object types and serve as a basis for land cover classification. The experiment is divided into three phases. In the phase 1, LiDAR data and decision tree classification method (DT) were used to classify the land cover and customize the geometric parameter elevation. In the phase 2, we combined aerial photographs, LiDAR data and DT method to improve the accuracy of land cover classification. In the phase 3, the support vector machine classification method (SVM) was used to compare the classification accuracy of different classification methods. The results show that customizing the geometric parameter elevation can improve the overall classification accuracy. The results of the study showed that the DT method and the SVM method had better results for the grass, building and artificial ground, and the SVM method had better results for the planted shrub and bare ground.
A radar system requires a number of high-power components operating in a narrow and convection-free environment. This study aims to develop an integrated heat dissipation system that is suitable for the high-power electronic equipment of radar systems. The proposed heat dissipation mechanism integrates a fluid circulation-type cold plate with a quad transmit receive module. The finite element method in the COMSOL fluid–solid coupling heat transfer analysis software was used to analyze the heat dissipation performance of the cold plate in the proposed mechanism. The Taguchi method was adopted to optimize the cold plate design. The simulation and experimental results show that the proposed mechanism can control the temperature equalization and temperature of the system within the specified requirements. The practicality of the proposed mechanism was verified. The findings can serve as a reference for the design of high-power electronic equipment in a heat dissipation system.
The Full Waveform LiDAR system has been developed and used commercially all over the world. It acts to record the complete time of a laser pulse and has a high-resolution sampling interval compared to the traditional multiple-echo LiDAR, which only provides signals within a single target range. This study area mainly collects data from Riegl LMS-Q680i Full Waveform LiDAR and WorldView-2 satellite imagery, which focuses on buildings, vegetation, grassland, asphalt roads and other ground types as the surface objects. The amplitude and pulse width are selected as waveform basic parameters. The parameter of topography is slope, and the height classification parameters of the test ground are 0–0.5 m, 0.5–2.5 m, and 2.5 m. To eliminate noise, the neighborhood average is applied on the LiDAR parameter values and analyzed as the classification accuracy comparison. This survey uses Decision Tree as the classification method. Comparing the data between neighborhood average and non-neighborhood average, the data classification accuracy improves by 7%, and Kappa improves by 5.92%. NDVI image data are utilized to distinguish the artificial from natural ground. The results show that the neighborhood average with previous data can improve the classification accuracy by 5%, and Kappa improves by 4.25%. By adding NIR-2 of WorldView-2 satellite imagery to the neighborhood average analysis, the overall classification accuracy is improved by 2%, and the Kappa value by 1.21%. This article shows that utilizing the analysis of neighborhood average and image parameters can effectively improve the classification accuracy of land covers.