Sushant Shashikant Rassay

Dr. Sushant Shashikant Rassay

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 June 2022 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
DMDicheng Mo
Dicheng Mo
SDShaurya Dabas
Shaurya Dabas
SRSushant Shashikant Rassay
Sushant Shashikant Rassay
RTRoozbeh Tabrizian
Roozbeh Tabrizian
This article presents a bulk acoustic wave (BAW) resonator with complementary switchable operation in the first and second thickness extensional modes (TE 1 and TE 2 ) at 7.04 and 13.4 GHz. Two ferroelectric scandium aluminum nitride (Sc 0.28 Al 0.72 N) layers are alternatively stacked with three molybdenum electrodes, creating a laminated BAW resonator with independent switchability of polarization in constituent transducers. This enables intrinsic switchability of the resonator in TE 1 and TE 2 modes, when the ferroelectric Sc 0.28 Al 0.72 N layers are poled in the same or opposite directions, respectively. A generalized analytical proof of complementary switchable operation, extended to laminated BAW resonators consisting of arbitrary number of Sc x Al 1-x N layers, is presented. For the demonstrated prototype, electromechanical coupling coefficients ( ${k}_{t}^{2}$ ) of 10.1% and 10.7%, and quality factors ( ${Q}$ ) of 115 and 151, are measured for TE 1 and TE 2 modes, respectively, when the resonator is configured in the corresponding operation states. Besides showing intrinsically configurable operation in super-high-frequency regime with high ${k}_{t}^{\textbf {2}}$ and ${Q}$ , a laminated Sc 0.28 Al 0.72 N BAW resonator exhibits repeatable operation under switching cycles.

10 May 2021 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
SRSushant Shashikant Rassay
Sushant Shashikant Rassay
DMDicheng Mo
Dicheng Mo
CLChao Li
Chao Li
NCNitin Choudhary
Nitin Choudhary
CFChristian Forgey
Christian Forgey
RTRoozbeh Tabrizian
Roozbeh Tabrizian
This letter reports intrinsically switchable ultra- and super-high-frequency Lamb-mode resonators based on the use of ferroelectricity in scandium aluminum nitride (Sc x Al 1-x N) films. Highly crystalline 200nm-thick Sc 0.22 Al 0.78 N film is sputtered using segmented-target reactive magnetron sputtering, and interdigitated electrodes are patterned to create one-port resonators operating in symmetric Lamb modes. The resonators are intrinsically switched using the ferroelectric behavior in Sc 0.22 Al 0.78 N film and through polarization switching at one of the terminals, resulting in a zero-sum electromechanical coupling factor ( k t 2 ). Resonators with frequencies over 0.45 - 6 GHz, frequency × quality factor product ( f s ×Q) as high as 4×10 12 , and and k t 2 ×Q product exceeding29 aredemonstrated. The intrinsic switchability of resonators is characterized using 100ms triangular monopolar pulses, resulting in an admittance switching isolation as high as 15dB.

26 June 2022 in Micromachines
Verified
Journal Article
Open access
PDF file
SRSushant Shashikant Rassay
Sushant Shashikant Rassay
DMDicheng Mo
Dicheng Mo
RTRoozbeh Tabrizian
Roozbeh Tabrizian
This paper presents the use of ferroelectric behavior in scandium–aluminum nitride (ScxAl1−xN) to create dual-mode Lamb-wave resonators for the realization of intrinsically configurable radio-frequency front-end systems. An integrated array of intrinsically switchable dual-mode Lamb-wave resonators with frequencies covering the 0.45–3 GHz spectrum. The resonators are created in ferroelectric scandium–aluminum nitride (Sc0.28Al0.72N) film and rely on period poling for intrinsic configuration between Lamb modes with highly different wavelengths and frequencies. A comprehensive analytical model is presented, formulating intrinsically switchable dual-mode operation and providing closed-form derivation of electromechanical coupling (kt2) in the two resonance modes as a function of electrode dimensions and scandium content. Fabricated resonator prototypes show kt2s as high as 4.95%, when operating in the first modes over 0.45–1.6 GHz, 2.23% when operating in the second mode of operation over 0.8–3 GHz, and series quality factors (Qs) over 300–800. Benefiting from lithographical frequency tailorability and intrinsic switchability that alleviate the need for external multiplexers, and large kt2 and Q, dual-mode Sc0.28Al0.72N Lamb-wave resonators are promising candidates to realize single-chip multi-band reconfigurable spectral processors for radio-frequency front-ends of modern wireless systems.

17 August 2022 in Physica Status Solidi (RRL) – Rapid Research Letters
Verified
Journal Article
Closed access
DMDicheng Mo
Dicheng Mo
SRSushant Shashikant Rassay
Sushant Shashikant Rassay
CLChao Li
Chao Li
RTRoozbeh Tabrizian
Roozbeh Tabrizian