Photodetectors are widely applied in modern industrial fields because they convert light energy into electrical signals. We propose a printable silver (Ag) paste electrode for a highly flexible metal–semiconductor–metal (MSM) broadband visible light photodetector as a wearable and portable device. Single-crystal and surface-textured silicon substrates with thicknesses of 37.21 μm were fabricated using a wet etching process. Surface texturization on flexible Si substrates enhances the light-trapping effect and minimizes reflectance from the incident light, and the average reflectance is reduced by 16.3% with pyramid-like structures. In this study, semitransparent, conductive Ag paste electrodes were manufactured using a screen-printing with liquid-phase process to form a flexible MSM broadband visible light photodetector. The transmittance of the homemade Ag paste solution fell between 34.83% and 36.98% in the wavelength range of visible light, from 400 nm to 800 nm. The highest visible light photosensitivity was 1.75 × 104 at 19.5 W/m2. The photocurrents of the flexible MSM broadband visible light photodetector were slightly changed under concave and convex conditions, displaying stable and durable bending properties.
In recent decades, zebrafish have become an increasingly popular laboratory organism in several fields of research due to their ease of reproduction and rapid maturation. In particular, shoaling behavior has attracted the attention of many researchers. This article presents a fully printed robotic model used to sense and stimulate shoaling behavior in zebrafish (Danio rerio). Specifically, we exposed laboratory-fabricated replicated materials to critical acid/base/salt environments and evaluated the mechanical, optical, and surface properties after a three-month immersion period. Focusing on weatherability, these test samples maintained high tensile strength (~45 MPa) and relatively similar transmission (>85%T in the visible region), as determined by UV–vis/FTIR spectroscopy. Three-dimensional (3D) printing technology allowed printing of models with different sizes and appearances. We describe the sense of zebrafish responses to replicas of different sizes and reveal that replicas approximating the true zebrafish size (3 cm) are more attractive than larger replicas (5 cm). This observation suggests that larger replicas appear as predators to the zebrafish and cause fleeing behavior. In this study, we determined the weatherability of a high-transparency resin and used it to fabricate a fully printed driving device to induce shoaling by zebrafish. Finally, we demonstrate a weathering-resistant (for three months) 3D-printed decoy model with potential utility for future studies of outdoor shoaling behavior, and the result has the potential to replace the traditional metal frame devices used in outdoor experiments.