In order to calculate hydrodynamic pressure of piers with arbitrary cross-sections under earthquake, a new added mass method is presented. To accomplish this, the relation between fundamental frequency reduction rate and the ratio of added mass to structural mass per unit length is deduced. The relation is validated by using added mass from Morison equation. The fundamental frequency reduction rates of arbitrary section piers are available by utilizing the fluid element method in ANSYS, added masses of any piers are achieved according to the relation. Based on added mass data, the expressions of which can be proposed by curve fitting. The added mass expressions for two kinds of piers, circular and square, are suggested and compared with other two methods. Results show that the new method is accurate in both dynamic property calculation and harmonic response calculation. Practical application reveals that the new method is an accurate, efficient and adaptable way to evaluate hydrodynamic pressure under earthquake.
The flow field around a horizontally oscillating bridge pier during earthquakes is characterized by a high Reynolds number and a small Keulegan-Carpenter number. This study aimed at the fluid forces exerted on a circular bridge pier in quiescent water during earthquakes. By scaling the hydrodynamic equations, it is analytically shown that the inertial force dominates the drag force. This characteristic is further demonstrated by performing numerical simulations. A given earthquake is first decomposed into a series of equivalent harmonic components. Then, the hydrodynamic forces are computed in the numerical code. The numerical results confirm that the inertial force dominates the drag force, and the inertial coefficient is essentially equal to 1 for all conditions examined for the monochromatic and two-frequency oscillations as well as the actual earthquakes. This confirmation is crucial, because the dominance of inertial force means that the resultant force can be predicted with the linear superposition of decomposed frequency components, owing to the inertial force being linear in the fluid-flow acceleration.
This paper presents systematic comparisons of dam-break wave generation and propagation between numerical solutions of RANS equations with three different turbulence models (standard k – ε, RNG k – ε and k – ω), numerical solutions of Euler equations, analytical solutions and experimental data from literature for both dry-bed and wet-bed cases. Results show that numerical solutions of RANS equations with the three different turbulence models can accurately calculate the whole process of dam-break wave propagating over both dry-bed and wet-bed. Numerical solutions of Euler equations show remarkable discrepancies compared with the experimental data in dry-bed condition, but can predict the dam-break wave well in wet-bed conditions. The merits and demerits of the calculation methods are discussed in full and their application scopes are suggested.