Gas resources play a key role in nowadays energy supply and provide 24% of the diverse energy portfolio. Water encroachment is one of the main trapping mechanisms in gas reservoirs. It decreases recovery by reduction of reservoir life, limits productivity and efficiency of wells, and elevates safety risks in gas production. The lack of a comprehensive study about water production problems is the primary motivation for this study. Contrary to the serious concern over the standalone investigation of an actual water production case study, less concern is put to deal with the problem comprehensively through an investigation of all potential sources and mechanisms, required methods, and available techniques. This study presents the potential sources of the problem, methods to identify it, and approaches to address it. Firstly, possible sources are described. Secondly, the diagnostic techniques are expressed. Then, practical solutions used in actual cases to overcome problems are elaborated. The solutions include both well- and reservoir-oriented approaches. Finally, all proper strategies are summarized to tackle the water problems in gas fields. The current study comprehensively presents the available methods for water control problems in parallel with conceptual and qualitative comparison. The finding of this study can be very constructive for better understanding of water sources, available diagnostic tools, and solutions for controlling water production in gas reservoirs and, consequently, taking the best decision in real case studies before attempting many water shut-off approaches.

The growing demand for clean energy can be met by improving the recovery of current resources. One of the effective methods in recovering the unswept reserves is chemical flooding. Microemulsion flooding is an alternative for surfactant flooding in a chemical-enhanced oil recovery method and can entirely sweep the remaining oil in porous media. The efficiency of microemulsion flooding is guaranteed through phase behavior analysis and customization regarding the actual field conditions. Reviewing the literature, there is a lack of experience that compared the macroscopic and microscopic efficiency of microemulsion flooding, especially in low viscous oil reservoirs. In the current study, one-quarter five-spot glass micromodel was implemented for investigating the effect of different parameters on microemulsion efficiency, including surfactant types, injection rate, and micromodel pattern. Image analysis techniques were applied to represent the phase saturations throughout the microemulsion flooding tests. The results confirm the appropriate efficiency of microemulsion flooding in improving the ultimate recovery. LABS microemulsion has the highest efficiency, and the increment of the injection rate has an adverse effect on oil recovery. According to the pore structure’s tests, it seems that permeability has little impact on recovery. The results of this study can be used in enhanced oil recovery designs in low-viscosity oil fields. It shows the impact of crucial parameters in microemulsion flooding.

Naturally fractured reservoirs (NFR) represent an important percentage of worldwide hydrocarbon reserves and production. The performance of naturally fractured gas condensate reservoirs would be more complicated regarding both rock and fluid effects. In contrast to the dual-porosity model, dual-porosity/dual-permeability (dual-permeability) model is considered as a modified model, in which flow to the wellbore occurs through both matrix and fracture systems. Fluid flow in gas condensate reservoirs usually demonstrates intricate flow behavior when the flowing bottom-hole pressure falls below the dew point. Accordingly, different regions with different characteristics are formed within the reservoir. These regions can be recognized by pressure transient analysis. Consequently, distinguishing between reservoir effects and fluid effects is challenging in these specific reservoirs and needs numerical simulation. The main objective of this paper is to examine the effect of condensate banking on the pressure behavior of lean and rich gas condensate NFRs through a simulation approach. Subsequently, evaluation of early-time characteristics of the pressure transient data is provided through a single well compositional simulation model. Then, drawdown, buildup, and multirate tests are conducted to establish the condition in which the flowing bottom-hole pressure drops below the dew point causing retrograde condensation. The simulation results are confirmed through well test analysis in both Iranian naturally fractured rich and lean gas condensate fields. Interpretations of simulation analysis revealed that the richer gas is more prone to condensation. When the pressure drops below the dew point, the pressure derivative curves in the rich gas system encounter a more shift to the right, and the trough becomes more pronounced as compared to the lean one.

Investigation into the Effects of Crude Oil on Foam Stability by using Different Low Salinity Water