The aging of the existing reservoirs makes the hydrocarbon extraction shift toward newer reserves, and harsh conditioned carbonates, which possess high temperature and high salinity (HTHS). Conventional polymer-flooding fails in these HTHS carbonates, due to precipitation, viscosity loss, and polymer adsorption. Therefore, to counteract these challenges, novel polymer-based cEOR alternatives employ optimized polymers, polymer–surfactant, and alkali–surfactant–polymer solutions along with hybrid methods, which have shown a potential to target the residual or remaining oils in carbonates. Consequently, we investigate novel polymers, viz., ATBS, Scleroglucan, NVP-based polymers, and hydrophobic associative polymers, along with bio-polymers. These selected polymers have shown low shear sensitivity, low adsorption, and robust thermal/salinity tolerance. Additionally, adding an alkali-surfactant to polymer solution produces a synergy effect of improved mobility control, wettability alteration, and interfacial-tension reduction. Thus, enhancing the displacement and sweep efficiencies. Moreover, low-salinity water can precondition high-salinity reservoirs before polymer flooding (hybrid method), to decrease polymer adsorption and viscosity loss. Thus, this paper is a reference for novel polymers, and their hybrid techniques, to improve polymer-based cEOR field applications under HTHS conditions in carbonates. Additionally, the recommendations can assist in project designs with reasonable costs and minimal environmental impact. The implication of this work will aid in supplementing the oil and gas energy sector growth, making a positive contribution to the Middle Eastern economy.

Surfactant-based viscoelastic (SBVE) fluids are innovative nonpolymeric non-newtonian fluid compositions that have recently gained much attention from the oil industry. SBVE can replace traditional polymeric fracturing fluid composition by mitigating problems arising during and after hydraulic fracturing operations are performed. In this study, SBVE fluid systems which are entangled with worm-like micellar solutions of cationic surfactant: cetrimonium bromide or CTAB and counterion inorganic sodium nitrate salt are synthesized. The salt reagent concentration is optimized by comparing the rheological characteristics of different concentration fluids at 25 °C. The study aims to mitigate the primary issue concerning these SBVE fluids: significant drop in viscosity at high temperature and high shear rate (HTHS) conditions. Hence, the authors synthesized a modified viscoelastic fluid system using ZnO nanoparticle (NPs) additives with a hypothesis of getting fluids with improved rheology. The rheology of optimum fluids of both categories: with (0.6 M NaNO₃ concentration fluid) and without (0.8 M NaNO₃ concentration fluid) ZnO NPs additives were compared for a range of shear rates from 1 to 500 Sec⁻¹ at different temperatures from 25 °C to 75 °C to visualize modifications in viscosity values after the addition of NPs additives. The rheology in terms of viscosity was higher for the fluid with 1% dispersed ZnO NPs additives at all temperatures for the entire range of shear rate values. Additionally, rheological correlation function models were derived for the synthesized fluids using statistical analysis methods. Subsequently, Herschel–Bulkley models were developed for optimum fluids depending on rheological correlation models. In the last section of the study, the pressure-drop estimation method is described using given group equations for laminar flow in a pipe depending on Herschel–Bulkley-model parameters have been identified for optimum fluids are consistency, flow index and yield stress values.

Matrix-acidizing operations have been accounted to be the most hazardous and environmentally harmful among all the well-stimulation techniques. For instance, diesel oil-based emulsified acids have been prohibited from usage due to their high level of toxicity. There is, therefore, a dire need for emulsified acids that are environmentally viable and technically competent to replace the diesel-based emulsified acids. In this study, a novel oil-based environmental friendly emulsified acid has been synthesized from Jatropha curcas oil and, then, compared against diesel and palm oil-based emulsified acids. The technical evaluation of the three acids has been done based on experimental results obtained from thermal stability, droplet size analysis, rheological study, acid solubility, and toxicity screening. In addition, core flooding experiments have been conducted to evaluate the performance of the three emulsified acids as well stimulants. The results revealed that Jatropha oil-based emulsified acid has the potential to replace diesel-based emulsified acid. Jatropha oil-based emulsified acid was found to perform better than the diesel-based emulsified acid as indicated by having greater thermal stability and more popular rheological properties at varying temperatures of ambient, 50 and 70 °C. Furthermore, it possessed a lower toxicity load and a higher retardation effect on acid solubility than that of the diesel oil-based emulsified acid. The core flooding results have also indicated better well-stimulation performance of Jatropha-based emulsified acid as compared with diesel-based emulsified acids.