Xiaofeng Wang

Xiaofeng Wang


Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 November 2022 in Molecules
Verified
Journal Article
Open access
PDF file
XYXiong Yang
Xiong Yang
BTBojun Tan
Bojun Tan
BWBo Wang
Bo Wang
LYLina Yao
Lina Yao
XLXin Li
Xin Li
XWXiaofeng Wang
Xiaofeng Wang
ZIF-67 is a three-dimensional zeolite imidazole ester framework material with a porous rhombic dodecahedral structure, a large specific surface area and excellent thermal stability. In this paper, the catalytic effect of ZIF-67 on five kinds of energetic materials, including RDX, HMX, CL-20, AP and the new heat-resistant energetic compound DAP-4, was investigated. It was found that when the mass fraction of ZIF-67 was 2%, it showed excellent performance in catalyzing the said compounds. Specifically, ZIF-67 reduced the thermal decomposition peak temperatures of RDX, HMX, CL-20 and DAP-4 by 22.3 °C, 18.8 °C, 4.7 °C and 10.5 °C, respectively. In addition, ZIF-67 lowered the low-temperature and high-temperature thermal decomposition peak temperatures of AP by 27.1 °C and 82.3 °C, respectively. Excitingly, after the addition of ZIF-67, the thermal decomposition temperature of the new heat-resistant high explosive DAP-4 declined by approximately 10.5 °C. In addition, the kinetic parameters of the RDX+ZIF-67, HMX+ZIF-67, CL-20+ZIF-67 and DAP-4+ZIF-67 compounds were analyzed. After the addition of the ZIF-67 catalyst, the activation energy of the four energetic materials decreased, especially HMX+ZIF-67, whose activation energy was approximately 190 kJ·mol−1 lower than that reported previously for HMX. Finally, the catalytic mechanism of ZIF-67 was summarized. ZIF-67 is a potential lead-free, green, insensitive and universal EMOFs-based energetic burning rate catalyst with a bright prospect for application in solid propellants in the future.

14 July 2020 in RSC Advances
Verified
Journal Article
Open access
PDF file
XYXiong Yang
Xiong Yang
JZJing Zhou
Jing Zhou
XXXiaoling Xing
Xiaoling Xing
YHYafeng Huang
Yafeng Huang
ZYZhengfeng Yan
Zhengfeng Yan
BWBozhou Wang
Bozhou Wang
3,3′-Bi(1,2,4-oxadiazole)-5,5′-diylbis(methylene)dinitrate (BOM) is a liquid phase carrier for melt cast explosives that is expected to replace TNT. The combination of a conjugated 1,2,4-oxadiazole backbone and nitrate ester groups endows BOM with both good energetic performance and impressive insensitivity. In this paper, the thermal behaviors of BOM were investigated using a TG–DSC synchronous thermal analyzer, proving that BOM is basically non-volatile under heating and melting processes. The apparent activation energy of BOM calculated by the Kissinger method was 158.2 kJ mol−1 at atmospheric pressure, which is higher than that of DNTF at atmospheric pressure and TNT at 2 MPa, indicating good thermal stability at low temperatures. The thermal decomposition mechanism of BOM was studied through both DSC-MS and in situ FTIR technologies. The low eutectic characteristics of BOM and DNTF were also investigated carefully and the best ratio of BOM/DNTF was 40/60 with a melting point at 75.5 °C. Finally, the detonation performances of TNT/HMX, BOM/HMX and BOM/DNTF(40/60)/HMX explosive formulations were calculated, showing that the detonation performances of the latter two formulations were significantly higher than that of TNT/HMX.

Verified
Journal Article
Open access
PDF file
HRHai-Chao Ren
Hai-Chao Ren
LJLinxiang Ji
Linxiang Ji
XJXian-Zhen Jia
Xian-Zhen Jia
JTJun Tao
Jun Tao
RLRuipeng Liu
Ruipeng Liu
GJGuang-Fu Ji
Guang-Fu Ji
The external electric field (E-field), which is an important stimulus, can change the decomposition mechanism and sensitivity of energetic materials. As a result, understanding the response of energetic materials to external E-fields is critical for their safe use. Motivated by recent experiments and theories, the two-dimensional infrared (2D IR) spectra of 3,4-bis (3-nitrofurazan-4-yl) furoxan (DNTF), which has a high energy, a low melting point, and comprehensive properties, were theoretically investigated. Cross-peaks were observed in 2D IR spectra under different E-fields, which demonstrated an intermolecular vibration energy transfer; the furazan ring vibration was found to play an important role in the analysis of vibration energy distribution and was extended over several DNTF molecules. Measurements of the non-covalent interactions, with the support of the 2D IR spectra, indicated that there were obvious non-covalent interactions among different DNTF molecules, which resulted from the conjugation of the furoxan ring and the furazan ring; the direction of the E-field also had a significant influence on the strength of the weak interactions. Furthermore, the calculation of the Laplacian bond order, which characterized the C-NO2 bonds as trigger bonds, predicted that the E-fields could change the thermal decomposition process of DNTF while the positive E-field facilitates the breakdown of the C-NO2 in DNTFⅣ molecules. Our work provides new insights into the relationship between the E-field and the intermolecular vibration energy transfer and decomposition mechanism of the DNTF system.

30 August 2016 in Journal of Energetic Materials
Verified
Journal Article
Closed access
JTJun Tao
Jun Tao
XWXiaofeng Wang
Xiaofeng Wang
SZShengxiang Zhao
Shengxiang Zhao
In order to study the crack formation mechanism of an aluminized polymer-bonded explosive (PBX) under tensile stress, a Brazilian test was carried out on the aluminized PBX grains with different densities. In addition, the microscopic morphologies of the samples after the Brazilian test were characterized. The experimental results show that the process of crack formation includes initiation, propagation, and final formation; the cracks are generated by the accumulation of microscopic defects and they expand gradually from the interior to the end surface of grains. With increasing grain density, as well as the curing process, the critical stress values could be significantly improved during the formation of cracks. The formation mechanism of the cracks is not transcrystalline fracture but interfacial debonding, which was observed using scanning electron microscopy.

18 December 2020 in RSC Advances
Verified
Journal Article
Open access
PDF file
JTJun Tao
Jun Tao
XWXiaofeng Wang
Xiaofeng Wang
HWHao Wang
Hao Wang
KZKun Zhang
Kun Zhang
In order to design and prepare hexanitrohexaazaisowurtzitane/aluminum (CL-20/Al) composites, the contact state of CL-20 with aluminum particles under different mixed solvent contents were calculated with the method of dissipative particle dynamics (DPD). Then the modified attachment energy (AE) model was applied to predict the morphologies of CL-20 in ethyl acetate, hexane and ethyl acetate/hexane mixed solvents. Furthermore, the morphologies, the surface element distribution, the sensitivity and the energy performance of CL-20/Al composites prepared with the solvent/non-solvent method were characterized, and the interaction mechanism were also obtained. The results achieved show that phase separation phenomenon becomes obvious with the decrease of ethyl acetate/n-hexane mixed solvent content. CL-20/aluminum particles will form the composites of aluminum particles embedded in CL-20 crystal when the solvent content is zero. The order of modified attachment energies for ethyl acetate/hexane mixed solvents on CL-20 faces is (011) > (110) > (101) ≈ (11−1) ≈ (10−1) > (002). Besides that, the crystalline morphology of CL-20 in acetate/hexane mixed solvents is spindle-shaped. There are many Al particles embedded in CL-20 crystals of CL-20/Al composites prepared by using solvent/non-solvent method. The calculated results agree well with the experimental results. In CL-20/Al composites, aluminum particles interact with CL-20 mainly through hydrogen bond and strong van der Waals force. The sensitivity of CL-20/Al composites decreased obviously compared with pure CL-20 and mechanical mixing composites. Besides, the CL-20/Al composites with embedded structure can increase the explosion reaction temperature to 791.2 K, which has obvious energy advantage compared with CL-20/Al physical mixture.

19 January 2023 in Nanomaterials
Verified
Journal Article
Open access
PDF file
PXPeng Xi
Peng Xi
SSShiyan Sun
Shiyan Sun
YSYu Shang
Yu Shang
XWXiaofeng Wang
Xiaofeng Wang
JDJun Dong
Jun Dong
XFXuesong Feng
Xuesong Feng
Boron powder is an additive for metalized explosives with great application potential. To improve the energy release ability of boron powder, the composites of RDX and nano-boron (RDX@Nano-B) were prepared by the spray-drying process, and the metalized explosives based on it were designed (named PBX-B1). The detonation heat and explosion pressure of boron-containing explosives PBX-B1 under vacuum and air conditions were measured and analyzed by an internal explosion test. On the other hand, the equilibrium pressure and energy release of the PBX-B1 explosive system after detonation were analyzed and compared with that of an explosive formulation of the same composition (named PBX-B2). Results showed that the detonation heat of PBX-B1 was 7456 J/g in a vacuum environment, which was 34.8% higher than that of RDX (5530 J/g). However, in the air environment, the detonation heat of PBX-B1 increased by 19.2% compared with that in the vacuum environment, and the explosive gas products mainly included N2, NOx, CO, H2O, CH4, HCN, and CO2. The peak pressure and equilibrium pressures of PBX-B1 were 11.2 and 0.42 MPa, which were increased by 155% and 75% compared with the vacuum environment, respectively. It is worth noting that, compared with that of PBX-B2, the released energy in the aerobic combustion stage and equilibrium pressure of PBX-B1 were increased by 49.8% and 10.5%. This study demonstrated the strategy of improving the energy release of boron-containing metalized explosives through the design of an explosive microstructure, which provides important clues for the design of higher-energy metalized explosives.