Yellow rust in winter wheat is a widespread and serious fungal disease, resulting in significant yield losses globally. Effective monitoring and accurate detection of yellow rust are crucial to ensure stable and reliable wheat production and food security. The existing standard methods often rely on manual inspection of disease symptoms in a small crop area by agronomists or trained surveyors. This is costly, time consuming and prone to error due to the subjectivity of surveyors. Recent advances in unmanned aerial vehicles (UAVs) mounted with hyperspectral image sensors have the potential to address these issues with low cost and high efficiency. This work proposed a new deep convolutional neural network (DCNN) based approach for automated crop disease detection using very high spatial resolution hyperspectral images captured with UAVs. The proposed model introduced multiple Inception-Resnet layers for feature extraction and was optimized to establish the most suitable depth and width of the network. Benefiting from the ability of convolution layers to handle three-dimensional data, the model used both spatial and spectral information for yellow rust detection. The model was calibrated with hyperspectral imagery collected by UAVs in five different dates across a whole crop cycle over a well-controlled field experiment with healthy and rust infected wheat plots. Its performance was compared across sampling dates and with random forest, a representative of traditional classification methods in which only spectral information was used. It was found that the method has high performance across all the growing cycle, particularly at late stages of the disease spread. The overall accuracy of the proposed model (0.85) was higher than that of the random forest classifier (0.77). These results showed that combining both spectral and spatial information is a suitable approach to improving the accuracy of crop disease detection with high resolution UAV hyperspectral images.

Yellow rust is a worldwide disease that poses a serious threat to the safety of wheat production. Numerous studies on near-surface hyperspectral remote sensing at the leaf scale have achieved good results for disease monitoring. The next step is to monitor the disease at the field scale, which is of great significance for disease control. In our study, an unmanned aerial vehicle (UAV) equipped with a hyperspectral sensor was used to obtain hyperspectral images at the field scale. Vegetation indices (VIs) and texture features (TFs) extracted from the UAV-based hyperspectral images and their combination were used to establish partial least-squares regression (PLSR)-based disease monitoring models in different infection periods. In addition, we resampled the original images with 1.2 cm spatial resolution to images with different spatial resolutions (3 cm, 5 cm, 7 cm, 10 cm, 15 cm, and 20 cm) to evaluate the effect of spatial resolution on disease monitoring accuracy. The findings showed that the VI-based model had the highest monitoring accuracy (R² = 0.75) in the mid-infection period. The TF-based model could be used to monitor yellow rust at the field scale and obtained the highest R² in the mid- and late-infection periods (0.65 and 0.82, respectively). The VI-TF-based models had the highest accuracy in each infection period and outperformed the VI-based or TF-based models. The spatial resolution had a negligible influence on the VI-based monitoring accuracy, but significantly influenced the TF-based monitoring accuracy. Furthermore, the optimal spatial resolution for monitoring yellow rust using the VI-TF-based model in each infection period was 10 cm. The findings provide a reference for accurate disease monitoring using UAV hyperspectral images.

This study focuses on the comparison of hybrid methods of estimation of biophysical variables such as leaf area index (LAI), leaf chlorophyll content (LCC), fraction of absorbed photosynthetically active radiation (FAPAR), fraction of vegetation cover (FVC), and canopy chlorophyll content (CCC) from Sentinel-2 satellite data. Different machine learning algorithms were trained with simulated spectra generated by the physically-based radiative transfer model PROSAIL and subsequently applied to Sentinel-2 reflectance spectra. The algorithms were assessed against a standard operational approach, i.e., the European Space Agency (ESA) Sentinel Application Platform (SNAP) toolbox, based on neural networks. Since kernel-based algorithms have a heavy computational cost when trained with large datasets, an active learning (AL) strategy was explored to try to alleviate this issue. Validation was carried out using ground data from two study sites: one in Shunyi (China) and the other in Maccarese (Italy). In general, the performance of the algorithms was consistent for the two study sites, though a different level of accuracy was found between the two sites, possibly due to slightly different ground sampling protocols and the range and variability of the values of the biophysical variables in the two ground datasets. For LAI estimation, the best ground validation results were obtained for both sites using least squares linear regression (LSLR) and partial least squares regression, with the best performances values of R² of 0.78, rott mean squared error (RMSE) of 0.68 m² m⁻² and a relative RMSE (RRMSE) of 19.48% obtained in the Maccarese site with LSLR. The best results for LCC were obtained using Random Forest Tree Bagger (RFTB) and Bagging Trees (BagT) with the best performances obtained in Maccarese using RFTB (R² = 0.26, RMSE = 8.88 μg cm⁻², RRMSE = 17.43%). Gaussian Process Regression (GPR) was the best algorithm for all variables only in the cross-validation phase, but not in the ground validation, where it ranked as the best only for FVC in Maccarese (R² = 0.90, RMSE = 0.08, RRMSE = 9.86%). It was found that the AL strategy was more efficient than the random selection of samples for training the GPR algorithm.

Fusarium wilt (Panama disease) of banana currently threatens banana production areas worldwide. Timely monitoring of Fusarium wilt disease is important for the disease treatment and adjustment of banana planting methods. The objective of this study was to establish a method for identifying the banana regions infested or not infested with Fusarium wilt disease using unmanned aerial vehicle (UAV)-based multispectral imagery. Two experiments were conducted in this study. In experiment 1, 120 sample plots were surveyed, of which 75% were used as modeling dataset for model fitting and the remaining were used as validation dataset 1 (VD1) for validation. In experiment 2, 35 sample plots were surveyed, which were used as validation dataset 2 (VD2) for model validation. An UAV equipped with a five band multispectral camera was used to capture the multispectral imagery. Eight vegetation indices (VIs) related to pigment absorption and plant growth changes were chosen for determining the biophysical and biochemical characteristics of the plants. The binary logistic regression (BLR) method was used to assess the spatial relationships between the VIs and the plants infested or not infested with Fusarium wilt. The results showed that the banana Fusarium wilt disease can be easily identified using the VIs including the green chlorophyll index (CI_green), red-edge chlorophyll index (CI_RE), normalized difference vegetation index (NDVI), and normalized difference red-edge index (NDRE). The fitting overall accuracies of the models were greater than 80%. Among the investigated VIs, the CI_RE exhibited the best performance both for the VD1 (OA = 91.7%, Kappa = 0.83) and VD2 (OA = 80.0%, Kappa = 0.59). For the same type of VI, the VIs including a red-edge band obtained a better performance than that excluding a red-edge band. A simulation of imagery with different spatial resolutions (i.e., 0.5-m, 1-m, 2-m, 5-m, and 10-m resolutions) showed that good identification accuracy of Fusarium wilt was obtained when the resolution was higher than 2 m. As the resolution decreased, the identification accuracy of Fusarium wilt showed a decreasing trend. The findings indicate that UAV-based remote sensing with a red-edge band is suitable for identifying banana Fusarium wilt disease. The results of this study provide guidance for detecting the disease and crop planting adjustment.

Wheat yellow rust is one of the most destructive diseases in wheat production and significantly affects wheat quality and yield. Accurate and non-destructive identification of yellow rust is critical to wheat production management. Hyperspectral imaging technology has proven to be effective in identifying plant diseases. We investigated the feasibility of identifying yellow rust on wheat leaves using spectral features and textural features (TFs) of hyperspectral images. First, the hyperspectral images were preprocessed, and healthy and yellow rust-infected samples were obtained by creating regions of interest. Second, the extraction of spectral reflectance characteristics and vegetation indices (VIs) were performed from the preprocessed hyperspectral images, and the TFs were extracted using the grey-level co-occurrence matrix from the images transformed by principal component analysis. Third, the successive projections algorithm was employed to choose the optimum wavebands (OWs), and correlation-based feature selection was employed to select the optimal VIs and TFs (those most sensitive to yellow rust and having minimal redundancy between features). Finally, identification models of wheat yellow rust were established using a support vector machine and different features. Six OWs (538, 598, 689, 702, 751, and 895 nm), four VIs (nitrogen reflectance index, photochemical reflectance index, greenness index, and anthocyanin reflectance index), and four TFs (correlation 1, correlation 2, entropy 2, and second moment 3) were selected. The identification models based on the OWs, VIs, and TFs provided overall accuracies of 83.3%, 89.5%, and 86.5%, respectively. The TF results were especially encouraging. The models with the combination of spectral features and TFs exhibited better performance than those using the spectral features or TFs alone. The accuracies of the models with the combined features (OWs and TFs, Vis, and TFs) were 90.6% and 95.8%, respectively. These values were 7.3% and 6.3% higher, respectively, than those of the models using only the OWs or VIs. The model with the combined feature (VIs and TFs) had the highest accuracy (95.8%) and was used to map the yellow rust lesions on wheat leaves with different damage levels. The results showed that the yellow rust lesions on the leaves could be identified accurately. Overall, the combination of spectral features and TFs of hyperspectral images significantly improved the identification accuracy of wheat yellow rust.

Leaf chlorophyll content (LCC) provides valuable information about the nutrition and photosynthesis statuses of crops. Vegetation index-based methods have been widely used in crop management studies for the non-destructive estimation of LCC using remote sensing technology. However, many published vegetation indices are sensitive to crop canopy structure, especially the leaf area index (LAI), when crop canopy spectra are used. Herein, to address this issue, we propose four new spectral indices (The red-edge-chlorophyll absorption index (RECAI), the red-edge-chlorophyll absorption index/optimized soil-adjusted vegetation index (RECAI/OSAVI), the red-edge-chlorophyll absorption index/ the triangular vegetation index (RECAI/TVI), and the red-edge-chlorophyll absorption index/the modified triangular vegetation index(RECAI/MTVI2)) and evaluate their performance for LCC retrieval by comparing their results with those of eight published spectral indices that are commonly used to estimate LCC. A total of 456 winter wheat canopy spectral data corresponding to physiological parameters in a wide range of species, growth stages, stress treatments, and growing seasons were collected. Five regression models (linear, power, exponential, polynomial, and logarithmic) were built to estimate LCC in this study. The results indicated that the newly proposed integrated RECAI/TVI exhibited the highest LCC predictive accuracy among all indices, where R² values increased by more than 13.09% and RMSE values reduced by more than 6.22%. While this index exhibited the best association with LCC (0.708** ≤ r ≤ 0.819**) among all indices, RECAI/TVI exhibited no significant relationship with LAI (0.029 ≤ r ≤ 0.167), making it largely insensitive to LAI changes. In terms of the effects of different field management measures, the LCC predictive accuracy by RECAI/TVI can be influenced by erective winter wheat varieties, low N fertilizer application density, no water application, and early sowing dates. In general, the newly developed integrated RECAI/TVI was sensitive to winter wheat LCC with a reduction in the influence of LAI. This index has strong potential for monitoring winter wheat nitrogen status and precision nitrogen management. However, further studies are required to test this index with more diverse datasets and different crops.