Citric acid, one of the representative chelate compounds, has been widely used as an additive to achieve the highly dispersed metal-supported catalysts. This study aimed to investigate the effect of citric acid concentration on the preparation of the highly dispersed Ni catalysts on mesoporous silica (SBA-15) for the dry reforming of methane. A series of Ni/SBA-15 catalysts with citric acid were prepared using the acid-assisted incipient wetness impregnation method, and the Ni/SBA-15 catalyst as a reference was synthesized via the impregnation method. First of all, the citric acid addition during the catalyst synthesis step regardless of its concentration resulted in highly dispersed Ni particles of ~4–7 nm in size in Ni/SBA-15 catalysts, which had a superior and stable catalytic performance in the dry reforming of methane (93% of CO₂ conversion and 86% of CH₄ conversion). In addition, the amount of coke formation was much lower in a series of Ni/SBA-15 catalysts with citric acid (~2–5 mg_coke g_cat⁻¹ h⁻¹) compared to pristine Ni/SBA-15 catalysts (~22 mg_coke g_cat⁻¹ h⁻¹). However, when the concentration of citric acid became higher, the more free NiO species that formed on the SBA-15 support, leading to large Ni particles after the stability test. The addition of citric acid is a very clear strategy for making highly dispersed catalysts, but its concentration needs to be carefully controlled.