Vito Logar

Dr. Vito Logar

Faculty of Electrical Engineering, University of Ljubljana, Tržaška 25, 1000 Ljubljana, Slovenia
orcid

Research Focus & Metrics

Academic Career Length

22Years (2005-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 December 2014 in IEEE Transactions on Fuzzy Systems
Verified
Journal Article
Closed access
DDDejan Dovzan
Dejan Dovzan
Vito LogarVito Logar
Vito Logar
ISIgor Skrjanc
Igor Skrjanc
Increasing demands on effluent quality and loads call for an improved control, monitoring, and fault detection of waste-water treatment plants (WWTPs). Improved control and optimization of WWTP lead to increased pollutant removal, a reduced need for chemicals as well as energy savings. An important step toward the optimal functioning of a WWTP is to minimize the influence of sensor faults on the control quality. To achieve this, a fault-detection system should be implemented. In this paper, the idea of using an evolving method as a base for the fault-detection/monitoring system is tested. The system is based on the evolving fuzzy model method. This method allows us to model the nonlinear relations between the variables with the Takagi-Sugeno fuzzy model. The method uses basic evolving mechanisms to add and remove clusters and the adaptation mechanism to adapt the clusters' and local models' parameters. The proposed fault-detection system is tested on measured data from a real WWTP. The results indicate the potential improvement of the WWTP's control during a sensor malfunction.

1 January 2012 in ISIJ International
Verified
Journal Article
Open access
PDF file
Vito LogarVito Logar
Vito Logar
DDDejan Dovžan
Dejan Dovžan
IŠIgor Škrjanc
Igor Škrjanc

1 January 2012 in ISIJ International
Verified
Journal Article
Closed access
Vito LogarVito Logar
Vito Logar
DDDejan Dovžan
Dejan Dovžan
IŠIgor Škrjanc
Igor Škrjanc

1 January 2011 in ISIJ International
Verified
Journal Article
Closed access
Vito LogarVito Logar
Vito Logar
DDDejan Dovžan
Dejan Dovžan
IŠIgor Škrjanc
Igor Škrjanc

3 December 2018 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
YSYadollah Saboohi
Yadollah Saboohi
AFAmirhossein Fathi
Amirhossein Fathi
ISIgor Skrjanc
Igor Skrjanc
Vito LogarVito Logar
Vito Logar
The paper presents an electric arc furnace (EAF) optimization framework intended to define optimal control profiles for the EAF, in order to increase its efficiency and thus reduce the energy consumption. The framework aims to minimize controllable losses and to maximize energy transfer to the bath, and consequently minimize the operational costs. This is achieved through improved actuation of the EAF inputs, i.e. transformer power, oxygen lancing and carbon addition. To achieve maximal energy transfer to the bath and to reduce the heat losses from the arcs, proper properties of the slag, such as foaminess and basicity, are a subject of considerable attention. The framework is designed as an model-based optimization, intended to be executed online in parallel to the actual EAF process. In order to achieve sufficiently low computational complexity and to allow process optimization by arbitrary time intervals, the framework uses path constraints instead of end-point constraints. A combination of several optimization algorithms is used to solve the optimization problem. The validation of the framework was performed by comparing the predicted and the measured operational variables. Simulation results show that optimized operation profiles lead to significant decrease in operational costs and production times.

9 May 2022 in Metals
Verified
Journal Article
Open access
PDF file
Simon TomazicSimon Tomazic
Simon Tomazic
GAGoran Andonovski
Goran Andonovski
ISIgor Skrjanc
Igor Skrjanc
Vito LogarVito Logar
Vito Logar
In the steel industry, the optimization of production processes has become increasingly important in recent years. Large amounts of historical data and various machine learning methods can be used to reduce energy consumption and increase overall time efficiency. Using data from more than two thousand electric arc furnace (EAF) batches produced in SIJ Acroni steelworks, the consumption of electrical energy during melting was analysed. Information on the consumed energy in each step of the electric arc process is essential to increase the efficiency of the EAF. In the paper, four different modelling approaches for predicting electrical energy consumption during EAF operation are presented: linear regression, k-NN modelling, evolving and conventional fuzzy modelling. In the learning phase, from a set of more than ten regressors, only those that have the greatest impact on energy consumption were selected. The obtained models that can accurately predict the energy consumption are used to determine the optimal duration of the transformer profile during melting. The models can predict the optimal energy consumption by selecting pre-processed training data, where the main steps are to find and remove outlier batches with the highest energy consumption and identify the influencing variables that contribute most to the increased energy consumption. It should be emphasised that the electrical energy consumption was too high in most batches only because the melting time was unnecessarily prolonged. Using the proposed models, EAF operators can obtain information on the estimated energy consumption before batch processing depending on the scrap weight in each basket and the added additives, as well as information on the optimal melting time for a given EAF batch. All models were validated and compared using 30% of all data, with the fuzzy model in particular providing accurate prediction results. It is expected that the use of the developed models will lead to a reduction in energy consumption as well as an increase in EAF efficiency.