In the steel industry, the optimization of production processes has become increasingly important in recent years. Large amounts of historical data and various machine learning methods can be used to reduce energy consumption and increase overall time efficiency. Using data from more than two thousand electric arc furnace (EAF) batches produced in SIJ Acroni steelworks, the consumption of electrical energy during melting was analysed. Information on the consumed energy in each step of the electric arc process is essential to increase the efficiency of the EAF. In the paper, four different modelling approaches for predicting electrical energy consumption during EAF operation are presented: linear regression, k-NN modelling, evolving and conventional fuzzy modelling. In the learning phase, from a set of more than ten regressors, only those that have the greatest impact on energy consumption were selected. The obtained models that can accurately predict the energy consumption are used to determine the optimal duration of the transformer profile during melting. The models can predict the optimal energy consumption by selecting pre-processed training data, where the main steps are to find and remove outlier batches with the highest energy consumption and identify the influencing variables that contribute most to the increased energy consumption. It should be emphasised that the electrical energy consumption was too high in most batches only because the melting time was unnecessarily prolonged. Using the proposed models, EAF operators can obtain information on the estimated energy consumption before batch processing depending on the scrap weight in each basket and the added additives, as well as information on the optimal melting time for a given EAF batch. All models were validated and compared using 30% of all data, with the fuzzy model in particular providing accurate prediction results. It is expected that the use of the developed models will lead to a reduction in energy consumption as well as an increase in EAF efficiency.
1 June 2018 in IEEE Transactions on Industrial Electronics
In this paper an efficient indoor localization algorithm based on confidence-interval fuzzy model (INFUMO) is presented. The width of confidence interval is essential within the proposed fingerprinting method for calculating weights, which are then taken into account while searching for the K nearest neighbours in the database of fingerprints. For each beacon in the test room a new confidence-interval fuzzy path-loss model composed of several local linear models is constructed. The map of fingerprints is then constructed of a set of confidence-interval fuzzy models. By their consideration the localization accuracy is significantly improved in comparison with other commonly used path-loss models. The most important novelty of this paper is the introduction of the confidence interval within the fingerprinting method, which additionally improves localization results. The platform of the localization system is developed on the basis of a smartphone and Bluetooth beacons. Therefore the localization algorithm has to be optimized in order to be computationally efficient, which is essential for real-time processing and low energy consumption on a smartphone.
Indoor localization is becoming increasingly important but is not yet widespread because installing the necessary infrastructure is often time-consuming and labor-intensive, which drives up the price. This paper presents an automated indoor localization system that combines all the necessary components to realize low-cost Bluetooth localization with the least data acquisition and network configuration overhead. The proposed system incorporates a sophisticated visual-inertial localization algorithm for a fully automated collection of Bluetooth signal strength data. A suitable collection of measurements can be quickly and easily performed, clearly defining which part of the space is not yet well covered by measurements. The obtained measurements, which can also be collected via the crowdsourcing approach, are used within a constrained nonlinear optimization algorithm. The latter is implemented on a smartphone and allows the online determination of the beacons’ locations and the construction of path loss models, which are validated in real-time using the particle swarm localization algorithm. The proposed system represents an advanced innovation as the application user can quickly find out when there are enough data collected for the expected radiolocation accuracy. In this way, radiolocation becomes much less time-consuming and labor-intensive as the configuration time is reduced by more than half. The experiment results show that the proposed system achieves a good trade-off in terms of network setup complexity and localization accuracy. The developed system for automated data acquisition and online modeling on a smartphone has proved to be very useful, as it can significantly simplify and speed up the installation of the Bluetooth network, especially in wide-area facilities.
The paper presents a novel decision support system designed to improve the efficiency and effectiveness of decision-making for electric arc furnace (EAF) operators. The system integrates two primary tools: the EAF Simulator, which is based on advanced mechanistic models, and the EAF Optimiser, which uses data-driven models trained on historical data. These tools enable the simulation and optimisation of furnace settings in real time and provide operators with important insights. A key objective was to develop a user-friendly interface with the Siemens Insights Hub Cloud Service and Node-RED that enables interactive management and support. The interface allows operators to analyse and compare past and simulated batches by adjusting the input data and parameters, resulting in improved optimisation and reduced costs. In addition, the system focuses on the collection and pre-processing of input data for the simulator and optimiser and uses Message Queuing Telemetry Transport (MQTT)communication between the user interfaces and models to ensure seamless data exchange. The EAF Simulator uses a comprehensive mathematical model to simulate the complex dynamics of heat and mass transfer, while the EAF Optimiser uses a fuzzy logic-based approach to predict optimal energy consumption. The integration with Siemens Edge Streaming Analytics ensures robust data collection and real-time responsiveness. The dual-interface design improves user accessibility and operational flexibility. This system has significant potential to reduce energy consumption by up to 10% and melting times by up to 15%, improving the efficiency and sustainability of the entire process.