Small olefins from syngas: The conversion of coal or natural gas to liquid fuels or chemicals often proceeds through the production of CO and H ₂ . This mixture, known as syngas, is then converted to hydrocarbons with Fischer-Tropsch catalysts. For the light olefins (ethylene to butylenes) needed for chemical and polymer synthesis, conventional catalysts are mechanistically limited to <60% conversion and deactivate through carbon buildup. Jiao et al. developed a bifunctional catalyst that achieves higher conversions and avoids deactivation (see the Perspective by de Jong). A zinc-chromium oxide creates ketene intermediates that are then coupled over a zeolite. Science , this issue p. 1065 , see also p. 1030

Breaking the trade-off between activity and selectivity has been a long-standing challenge in the field of catalysis. We demonstrate the importance of disentangling the target reaction from the secondary reactions for the case of direct syngas conversion to light olefins by incorporating germanium-substituted AlPO-18 within the framework of the metal oxide–zeolite (OXZEO) catalyst concept. The attenuated strength of the catalytically active Brønsted acid sites allows enhancing the targeted carbon-carbon coupling of ketene intermediates to form olefins by increasing the active site density while inhibiting secondary reactions that consume the olefins. Thus, a light-olefins selectivity of 83% among hydrocarbons and carbon monoxide conversion of 85% were obtained simultaneously, leading to an unprecedented light-olefins yield of 48% versus current reported light-olefins yields of ≤27%.

A composite catalyst combining the partially reducible ZnCrO_x with zeolite ZSM-5 enables direct conversion of syngas to aromatics, with a selectivity to aromatics reaching 73.9% at a single pass CO conversion of 16.0%.