The continuous increase of the demand in merchandise and fuels augments the need of modern approaches for the mass-production of renewable chemicals derived from abundant feedstocks, like biomass, as well as for the water and soil remediation pollution resulting from the anthropogenic discharge of organic compounds. Towards these directions and within the concept of circular (bio)economy, the development of efficient and sustainable catalytic processes is of paramount importance. Within this context, the design of novel catalysts play a key role, with carbon-based nanocatalysts (CnCs) representing one of the most promising class of materials. In this review, a wide range of CnCs utilized for biomass valorization towards valuable chemicals production, and for environmental remediation applications are summarized and discussed. Emphasis is given in particular on the catalytic production of 5-hydroxymethylfurfural (5-HMF) from cellulose or starch-rich food waste, the hydrogenolysis of lignin towards high bio-oil yields enriched predominately in alkyl and oxygenated phenolic monomers, the photocatalytic, sonocatalytic or sonophotocatalytic selective partial oxidation of 5-HMF to 2,5-diformylfuran (DFF) and the decomposition of organic pollutants in aqueous matrixes. The carbonaceous materials were utilized as stand-alone catalysts or as supports of (nano)metals are various types of activated micro/mesoporous carbons, graphene/graphite and the chemically modified counterparts like graphite oxide and reduced graphite oxide, carbon nanotubes, carbon quantum dots, graphitic carbon nitride, and fullerenes.

Lignin is one of the main structural components of lignocellulosic biomass and can be utilized to produce phenolic compounds that can be converted downstream to cycloalkanes and aromatics, which are useful as drop-in road or aviation biofuels. Within this study, the hydrodeoxygenation of model phenolic/aromatic compounds and surrogate mixture simulating the light fraction of lignin fast-pyrolysis bio-oil was performed under mild reaction conditions. Ni/BEA zeolite was selected as a catalyst to investigate the conversion and the product selectivity of alkyl phenols (phenol, catechol, cresols), methoxy-phenols (guaiacol, syringol, creosol), aromatics (anisole, 1,2,3-trimethoxybenzene) and dimer (2-phenoxy-1-phenyl ethanol) compounds towards (alkyl)cycloalkanes. The hydrodeoxygenation of a surrogate mixture of eleven phenolic and aromatic compounds was then studied by investigating the effect of reaction conditions (temperature, time, H₂ pressure, surrogate mixture concentration, and catalyst-to-feed ratio). The conversion of model compounds was in the range of 80–100%, towards a 37–81% (alkyl)cycloalkane yield, being strongly dependent on the complexity/side-chain group of the phenolic/aromatic ring. Regarding the hydrodeoxygenation of the surrogate mixture, 59–100% conversion was achieved, with up to a 72% yield of C₆–C₉ cycloalkanes. Characterization of spent catalysts showed that the hydrodeoxygenation of surrogate mixture led to carbonaceous depositions on the catalyst, which can be limited under lower temperatures and longer reaction conditions, while after regeneration, the physicochemical properties of catalysts can be partially recovered.