Cunfeng Kang

Dr. Cunfeng Kang

Beijing University of Technology, Beijing, China
orcid

Research Focus & Metrics

Academic Career Length

18Years (2009-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 May 2022 in Sensors
Verified
Journal Article
Open access
PDF file
Xiaohan QieXiaohan Qie
Xiaohan Qie
CKCunfeng Kang
Cunfeng Kang
GZGuanchen Zong
Guanchen Zong
SCShujun Chen
Shujun Chen
In this study, a Back Propagation (BP) neural network algorithm based on Genetic Algorithm (GA) optimization is proposed to plan and optimize the trajectory of a redundant robotic arm for the upper limb rehabilitation of patients. The feasibility of the trajectory was verified by numerical simulations. First, the collected dataset was used to train the BP neural network optimized by the GA. Subsequently, the critical points designated by the rehabilitation physician for the upper limb rehabilitation were used as interpolation points for cubic B−spline interpolation to plan the motion trajectory. The GA optimized the planned trajectory with the goal of time minimization, and the feasibility of the optimized trajectory was analyzed with MATLAB simulations. The planned trajectory was smooth and continuous. There was no abrupt change in location or speed. Finally, simulations revealed that the optimized trajectory reduced the motion time and increased the motion speed between two adjacent critical points which improved the rehabilitation effect and can be applied to patients with different needs, which has high application value.

4 February 2024 in Sensors
Verified
Journal Article
Open access
PDF file
SCShujun Chen
Shujun Chen
GZGuanchen Zong
Guanchen Zong
CKCunfeng Kang
Cunfeng Kang
XJXiaoqing Jiang
Xiaoqing Jiang
Robotic friction stir welding has become an important research direction in friction stir welding technology. However, the low stiffness of serial industrial robots leads to substantial, difficult-to-measure end-effector deviations under the welding forces during the friction stir welding process, impacting the welding quality. To more effectively measure the deviations in the end-effector, this study introduces a digital twin model based on the five-dimensional digital twin theory. The model obtains the current data of the robot and six-axis force sensor and calculates the real-time end deviations using the robot model. Based on this, a virtual welding model was realized by integrating the FEA model with the digital twin model using a co-simulation approach. This model achieves pre-process simulation by iteratively cycling through the simulated force from the FEA model and the end displacement from the robot model. The virtual welding model effectively predicts the welding outcomes with a mere 6.9% error in lateral deviation compared to actual welding, demonstrating its potential in optimizing welding parameters and enhancing accuracy and quality. Employing digital twin models to monitor, simulate, and optimize the welding process can reduce risks, save costs, and improve efficiency, providing new perspectives for optimizing robotic friction stir welding processes.

4 March 2024 in Actuators
Verified
Journal Article
Open access
PDF file
ZWZheng Wu
Zheng Wu
CKCunfeng Kang
Cunfeng Kang
BLBorun Li
Borun Li
JRJiageng Ruan
Jiageng Ruan
XZXueke Zheng
Xueke Zheng
The vehicle lateral stability control algorithm is an essential component of the electronic stability program (ESP), and its control effect directly affects the vehicle’s driving safety. However, there are still numerous shortcomings and challenges that need to be addressed, including enhancing the efficiency of processing intricate pavement condition data, improving the accuracy of parameter adjustment, and identifying subtle and elusive patterns amidst noisy and ambiguous data. The introduction of machine learning algorithms can address the aforementioned issues, making it imperative to apply machine learning to the research of lateral stability control algorithms. This paper presented a vehicle lateral electronic stability control algorithm based on the back propagation (BP) neural network and PID control algorithm. Firstly, the dynamics of the whole vehicle have been analytically modeled. Then, a 2 DOF prediction model and a 14 DOF simulation model were built in MATLAB Simulink to simulate the data of the electronic control units (ECU) in ESP and estimate the dynamic performance of the real vehicle. In addition, the self-correction of the PID algorithm was verified by a Simulink/CarSim combined simulation. The improvement of the BP neural network to the traditional PID algorithm was also analyzed in Simulink. These simulation results show the self-correction of the PID algorithm on the lateral stability control of the vehicle under different road conditions and at different vehicle speeds. The BP neural network smoothed the vehicle trajectory controlled by traditional PID and improved the self-correction ability of the control system by iterative training. Furthermore, it shows that the algorithm can automatically tune the control parameters and optimize the control process of the lateral electronic stability control algorithm, thus improving vehicle stability and adapting it to many different vehicle models and road conditions. Therefore, the algorithm has a high practical value and provides a feasible idea for developing a more intelligent and general vehicle lateral electronic stability system.

7 March 2024 in Processes
Verified
Journal Article
Open access
PDF file
GZGuanchen Zong
Guanchen Zong
CKCunfeng Kang
Cunfeng Kang
SCShujun Chen
Shujun Chen
XJXiaoqing Jiang
Xiaoqing Jiang
Robotic friction stir welding (RFSW), with its wide application range, ample working space, and task flexibility, has emerged as a vital development in friction stir welding (FSW) technology. However, the low stiffness of serial industrial robots can lead to end-effector deviations and vibrations during FSW tasks, adversely affecting the weld quality. This paper proposes a dynamic dual particle swarm optimization (DDPSO) algorithm through a new comprehensive stability index that considers both the stiffness and vibration stability of the robot to optimize the installation position of complex space curve weldments, thereby enhancing the robot’s stability during the FSW process. The algorithm employs two independent particle swarms for exploration and exploitation tasks and dynamically adjusts task allocation and particle numbers based on current results to fully utilize computational resources and enhance search efficiency. Compared to the standard particle swarm optimization (PSO) algorithm, the DDPSO approach demonstrated superior search capabilities and stability of optimization results. The maximum fitness value improved by 4.2%, the average value increased by 12.74%, and the concentration level of optimization results rose by 72.91% on average. The new optimization method pioneers fresh perspectives for optimizing the stability of RFSW, providing significant grounds for the process optimization and offline programming of complex spatial curve weldments.

26 June 2024 in Materials
Verified
Journal Article
Open access
PDF file
CKCunfeng Kang
Cunfeng Kang
BSBaoxu Sun
Baoxu Sun
XZXinshang Zhang
Xinshang Zhang
CYChengxi Yao
Chengxi Yao
Cold bending forming is a complex forming process, and its product quality is closely related to the forming process parameters. To mitigate issues such as bulging and waviness arising from the extension of the material at the edges during the forming process of thin-walled circular tubes, a comprehensive comparative analysis was conducted on four forming methods. This analysis determined that the combined bending method is the optimal forming technique for the equipment. For the impact of different parameters on the equivalent plastic strain distribution of the product and the force on the rollers, numerical simulations were carried out using the software COPRA (COPRA FEA RF 2023.1) after designing the pattern diagram based on the integrated bending method. The results showed that different processing speeds on the equivalent plastic strain distribution and work hardening of the plate have little effect. As the spacing between the upper and lower rollers increases, the equivalent plastic strain of the plate to a certain extent and the value of the moment of the rollers is significantly reduced. Analyzing the performance characteristics of high-strength steel materials from the aspects of the thickness strain and cross-sectional forming of the plate, this verifies the advantages of forming high-strength steel plates. The numerical simulation results of this study are in good agreement with actual production experimental results.

28 May 2024 in Materials
Verified
Journal Article
Open access
PDF file
GZGuanchen Zong
Guanchen Zong
CKCunfeng Kang
Cunfeng Kang
SCShujun Chen
Shujun Chen
Robotic Friction Stir Welding (RFSW) technology integrates the advantages of friction stir welding and industrial robots, finding extensive applications and research in aerospace, shipbuilding, and new energy vehicles. However, the high-speed rotational process of friction stir welding combined with the low stiffness characteristics of serial industrial robots inevitably introduces vibrations during the welding process. This paper investigates the vibration patterns and impacts during the RFSW process and proposes an active vibration avoidance control method for variable speed welding based on constant heat input. This method utilizes a vibration feedback strategy that adjusts the spindle speed actively if the end-effector’s vibration exceeds a threshold, thereby avoiding the modal frequencies of the robot at its current pose. Concurrently, it calculates and adjusts the welding speed of the robot according to the thermal equilibrium equation to maintain constant heat input. A simplified dynamic model of the RFSW robot was established, and the feasibility of this method was validated through simulation experiments. This study fills the gap in vibration analysis of RFSW and provides new insights into control strategies and process optimization for robotic friction stir welding.