Wenqiang Zhang

Dr. Wenqiang Zhang

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 December 2023 in Physics of Fluids
Verified
Journal Article
Open access
PDF file
JQJia-Hui Qiu
Jia-Hui Qiu
HZHong-Liang Zhao
Hong-Liang Zhao
JDJuan Du
Juan Du
MZMin Zhang
Min Zhang
WZWenqiang Zhang
Wenqiang Zhang
ZFZhong-Gang Fan
Zhong-Gang Fan
Inlet total temperature distortion refers to the nonuniform distribution of the total temperature at the inlet of the aero-engine, which is one of the external destabilizing factors that have the most remarkable impact on the stability of an aero-engine. In this study, the stalling process of the Darmstadt transonic compressor is investigated under the total temperature distortion of 180 deg circumferential extent and 500 K intensity by full-annulus unsteady numerical simulation. The analysis shows the addition of inlet total temperature distortion deteriorates the compressor stall margin from 22.7% to 17.0% with a considerable decrease in the pressure ratio. The type of compressor stall inception under temperature distortion conditions remains spike. Pressure perturbations and radial vortex formation are first clearly detected when the rotor rotates into the high temperature distortion region. The circumferential propagation of the stall cells under the total temperature distortion is 66% of the rotor speed, which is faster than that under uniform condition whose value is 44% of the rotor speed. The optimized casing treatment (CT) has extended the stall margin of the rotor without producing efficiency loss under uniform condition. The anti-distortion ability of CT is first verified despite its negative impact on efficiency under total temperature distortion. The adoption of CT could obviously push the shock wave into the blade passage under total temperature distortion condition. In addition, it can reduce the tip blade loading, thus removing the low Mach number area in the tip region, while increasing the blade loading below 80% span.

2 July 2024 in Langmuir
Verified
Journal Article
Open access
XCXinjiao Cui
Xinjiao Cui
CYChao Yang
Chao Yang
QSQiangqiang Sun
Qiangqiang Sun
WZWenqiang Zhang
Wenqiang Zhang
Xinyu WangXinyu Wang
Xinyu Wang
The investigation of the anti-icing/deicing is essential because the icing phenomenon deteriorates the natural environment and various projects. By conducting molecular dynamics simulation, this work analyzes the effect of the quasi-water layer on the ice shear stress over smooth and rough surfaces, along with the underlying physics of the quasi-water layer. The results indicate that the thickness of the quasi-water layer monotonically increases with temperature, resulting in a monotonic decrease in the ice shear stress on the smooth surface. Due to the joint effects of the smooth surface wettability and the quasi-water layer, the ice shear stress increases and then decreases to almost a constant value when the surface changes from a hydrophobic to a hydrophilic one. For rough surfaces with stripe nanostructures, when the width of the bump for one case equals the depression for the other case, the variations of shear stress with height for these two cases are almost the same. The rough surface is effective in reducing the ice shear stress compared to the smooth surface due to the thickening of the quasi-water layer. Each molecule in the quasi-water layer and its four nearest neighboring molecules gradually form a tetrahedral ice-like structure along the direction away from the surface. The radial distribution function also shows that the quasi-water layer resembles the liquid water rather than the ice structure. These findings shed light on developing anti-icing and deicing techniques.

24 June 2022 in Aerospace
Verified
Journal Article
Open access
PDF file
BLBowen Li
Bowen Li
QSQiangqiang Sun
Qiangqiang Sun
DXDandan Xiao
Dandan Xiao
WZWenqiang Zhang
Wenqiang Zhang
The aerodynamics of an aerofoil with surface heating was numerically studied with the objective to build an effective anti-icing strategy and balance the aerodynamics performance and energy consumption. NACA0012, RAE2822 and ONERA M6 aerofoils were adopted as the test cases and the simulations were performed in the subsonic flight condition of commercial passenger aircraft. In the first session, the numerical scheme was firstly validated with the experimental data. A parametric study with different heating temperatures and heating areas was carried out. The lift and drag coefficients both drop with surface heating, especially at a larger angle of attack. It was found that the separation point on the upper surface of the aerofoil is sensitive to heating. Higher heating temperature or larger heating area pushes the shock wave and hence flow separation point moving towards the leading edge, which reduces the low-pressure region of the upper surface and decreases the lift. In the second session, the conclusions obtained are applied to inform the design of the heating scheme for NACA0012. Further guidelines for different flight conditions were proposed to shed light on the optimisation of the heating strategy.

28 December 2024 in International Journal of Refrigeration
Verified
Journal Article
Closed access
YSYukun Sun
Yukun Sun
TYTao Yang
Tao Yang
WZWenqiang Zhang
Wenqiang Zhang
QSQiangqiang Sun
Qiangqiang Sun
JSJun Shen
Jun Shen

26 August 2024 in Aerospace
Verified
Journal Article
Open access
PDF file
WZWenqiang Zhang
Wenqiang Zhang
TYTao Yang
Tao Yang
JSJun Shen
Jun Shen
QSQiangqiang Sun
Qiangqiang Sun
With the startup of the aero-engine, the ground vortex is formed between the ground and the engine intake. The ground vortex leads to total pressure and swirl distortion, which reduces the performance of the engine. The inhalation of the dust and debris through a ground vortex can erode the fan blade, block the seals and degrade turbine cooling performance. As the diameter of the modern fan blade becomes larger, the clearance between the intake lip and the ground surface is smaller, which enhances the strength of the ground vortex. Though considerable numerical studies have been conducted with the predictions of the ground vortex, it is noted that the accurate simulation of the ground vortex is still a tough task. This paper presents authors’ simulation work of the ground vortex into an intake model with different crosswind speeds. This paper tackles the challenge with a parametric study to provide useful guidelines on how to obtain a good match with the experimental data. The influence of the mesh density, performance of different turbulence models and how the boundary layer thickness affects the prediction results are conducted and analysed. The detailed structure of the flow field with ground vortex is presented, which can shed light on the experimental observations. A number of suggestions are presented that can pave the road to the accurate flow field simulations with strong vorticities.

1 January 2025 in Physics of Fluids
Verified
Journal Article
Closed access
LDLei Dong
Lei Dong
WZWenqiang Zhang
Wenqiang Zhang
JRJie Ren
Jie Ren
XYXin Yang
Xin Yang
DXDandan Xiao
Dandan Xiao
XMXuerui Mao
Xuerui Mao
Two low-frequency-modulated plasma actuators are symmetrically positioned on either side of a thin flat plate to continuously generate pairs of counter-rotating vortices, with velocity fields captured using time-resolved particle image velocimetry (PIV). Convolutional neural networks with a U-Net architecture are adopted to generate the phase-averaged velocity field of plasma-induced vortices from a single PIV snapshot to eliminate the requirement of multiple measurements. The influence of the number of input features and samples on the model accuracy is examined. The model-predicted results match well with the measurements, accurately restoring the vortex dynamics and capturing the strength variation. The proposed model is then utilized to reconstruct the phase-averaged results of the starting vortex for continuous plasma jets, revealing that the evolution of plasma-induced vortices and their transition into a jet are characterized by four distinct stages: formation, boosting, distortion, and jetting, all governed by the vortex convection velocity. The vortices exhibit a marked increase in circulation after a delayed development, moving linearly downstream while diverging from the centerline. Consequently, the vortex-induced effect significantly enhances the centerline velocity. The vortices are subsequently stretched and distorted from a circular into a chain-like shape due to the large velocity gradient between the vortex pair, leading to the vortex breakdown and transition into a jet, accompanied by a collapse in the velocity magnitude. Insights into vortex-to-jet transition inform the optimal placement of plasma actuators, thereby enhancing control efficiency in active flow control applications.