The main aim of this paper is to carry out the environmentally based enhancement of a concrete mixture containing recycled materials whilst considering natural resource consumption as well as mechanical and thermal property levels. The developed concrete is intended to be used in mortarless masonry wall structures. Ten concrete mixtures with different types and replacement rates of recycled masonry aggregate and recycled expanded polystyrene were prepared, and their mechanical and thermal properties were experimentally investigated. It was found that the use of recycled masonry aggregate led to better thermal properties while maintaining sufficient mechanical properties. On the contrary, the addition of recycled expanded polystyrene did not significantly affect the thermal properties of concrete, but the mechanical properties considerably declined. For this reason, the recycled masonry aggregate is suitable to use as an aggregate for concrete masonry blocks for wall structures.

For a sustainable building industry, reusable construction with a low demand for primary resources is needed. Moreover, if we want to reduce the amount of construction and demolition waste, construction with recycled aggregate should be considered. To investigate the environmental impacts of such concrete construction, life cycle assessment (LCA) was used to compare the following types of concrete construction: Reusable blocks with recycled brick aggregate, reusable blocks with recycled concrete, reusable blocks with natural aggregate, and regular concrete wall. Firstly, the properties of new concrete with recycled aggregate were measured, such as physical, mechanical, and thermal properties. Then, different constructions were designed and assessed using the method of Institute of Environmental Sciences (CML2001) and the method of National Institute for Public Health and the Environment (ReCiPe 2016) as characterization methods. Unsurprisingly, the regular concrete wall had a higher impact on most of the impact categories, e.g., 113 kg CO₂ eq. (in the first scenario, using CML2001). In accordance with the circular principles, the reusability of blocks and recycling of aggregate are the main factors that affect the environmental impact of the constructions. Thus, the global warming potential (GWP) of construction with reusable recycled concrete blocks was only 53 kg CO₂ eq. (in the second scenario). Moreover, we show differences in the results of CML2001 and ReCiPe 2016, e.g., in the Photochemical Oxidant Creation category.

This paper deals with the possibility of using different types of waste glass powder in high-performance concrete (HPC) mixtures as a fine fraction replacement. Subsequently, both fractions are used in this research in concrete as a substitute for fine sand and silica flour. To use waste glass in a basic building material such as concrete, it is necessary to verify the basic chemical properties of the selected waste materials. Apart from the basic chemical properties, its environmental impact also appears to be an essential property of waste materials in general. Therefore, the research is mainly focused on the leaching and ecotoxicity experiments on high-performance concrete. HPC mixtures are designed based on the results of the analyzed chemical properties and previous research performed by our research team. Ecotoxicity of these concretes is then verified using Czech standards to evaluate. The results showed a positive impact on the ecotoxic properties of waste glass when used in concrete. A new ecotoxicity classification of waste materials and concrete mixes containing waste materials is proposed as a result of this research and summarized in the conclusion of this paper.

This article deals with the possibility of utilization of secondary-raw materials as a natural sand replacement in concrete. Four types of waste construction materials were examined—recycled aggregate from four different sources. The natural aggregate was examined as well as used as the reference sample. All the samples were tested to evaluate the water absorption, particle size distribution, and particle density. The basic chemical reactions in the view of ecotoxicology are investigated and measured based on Czech standards. Chemical analysis, Lemna growth inhibition test, freshwater algae, daphnia acute, and mustard germination toxicity test were made and discussed in this paper. Based on the physical and geometrical properties and ecotoxicology of examined waste materials, this work evaluated them as suitable for utilization in concrete as a sand replacement.

In the case of concrete sustainability, two main ways are generally discussed: (1) the reduction of natural raw materials and (2) the reduction of emissions related to concrete production. Following the second point, there have not yet been reported clear results. This problem is not given enough attention in present publications. This study brings a general view of this issue and a basic comparison with common concrete and traditional reinforcement. This case study deals with the life cycle analysis of a concrete slab made of recycled aggregate concrete with a fine recycled aggregate. The concrete slab was designed according to the limit states of load-bearing capacity and serviceability, which is based on the experimental verification of recycled aggregate concrete properties. Two different reinforcements are compared: (1) ordinary reinforcement by steel bars and (2) glass fibers. Furthermore, scenarios vary due to the slab thickness and reinforcement percentage. The results show the positive environmental impact of replacing natural sand with a fine recycled aggregate. The reduction of climate change potential can be almost 40% in some cases.

The use of recycled aggregate concrete is mainly negatively affected by its poorer mechanical and long-term properties. However, there are few structural applications for which recycled aggregates can be used. In this case study, the possibility of use as massive external reinforcement wall is verified. For this structural application, the most important characteristics are freeze–thaw resistance, and carbonation resistance and then the mechanical properties such as compressive strength. Durability characteristics of the materials have been tested and improved in the study. The mechanical properties and durability of recycled aggregated concrete have been verified and crystalline mixture has been used to improve durability. The specific structural application of the massive external reinforcement wall is for the renovation of the Czech WW2 concrete fortification, which is one of the most important cultural heritages of the Czech Republic of the 20th century. However, these buildings have not yet been professionally rebuilt, but this research project aims to change this trend. The thickness of the bunker wall is between 0.5 and 3.5 m (depending on the type of bunker) which leads to a huge amount of concrete and primary resources consumption; however, the security function is not necessary today, so the reconstruction could be provided by recycled aggregate concrete. The results showed a positive effect of the crystalline mixture on the essential properties of recycled aggregate concrete. Recycled aggregate concrete with a complete replacement of aggregate by recycled concrete or masonry aggregate is possible to use for the reconstruction of the Czech WW2 concrete fortification and save natural aggregate as a primary resource.