Arid and semi-arid regions have different spectral characteristics from other climatic regions. Therefore, appropriate remotely sensed indicators of land use and land cover types need to be defined for arid and semi-arid lands, as indices developed for other climatic regions may not give plausible results in arid and semi-arid regions. For instance, the normalized difference built-up index (NDBI) and normalized difference bareness index (NDBaI) are unable to distinguish between built-up areas and bare and dry soil that surrounds many cities in dry climates. This paper proposes the application of two newly developed indices, the dry built-up index (DBI) and dry bare-soil index (DBSI) to map built-up and bare areas in a dry climate from Landsat 8. The developed DBI and DBSI were applied to map urban areas and bare soil in the city of Erbil, Iraq. The results show an overall classification accuracy of 93% (κ = 0.86) and 92% (κ = 0.84) for DBI and DBSI, respectively. The results indicate the suitability of the proposed indices to discriminate between urban areas and bare soil in arid and semi-arid climates.

One of the most common types of natural disaster, floods can happen anywhere on Earth, except in the polar regions. The severity of the damage caused by flooding can be reduced by putting proper management and protocols into place. Using remote sensing and a geospatial methodology, this study attempts to identify flood-vulnerable areas of the central district of Duhok, Iraq. The analytical hierarchy process (AHP) technique was used to give relative weights to 12 contributing parameters, including elevation, slope, distance from the river, rainfall, land use land cover, soil, lithology, topographic roughness index, topographic wetness index, aspect, the sediment transport index, and the stream power index in order to calculate the Flood Hazard Index (FHI). The relative importance of each criterion was revealed by a sensitivity analysis of the parameter values. This research developed a final flood susceptibility map and identified high-susceptible zones. This was classified anywhere from very low to very high classifications for its potential flood hazard. The generated map indicates that 44.72 km² of the total land area of the study area in Duhok city has a very high susceptibility to flooding, and that these areas require significant attention from government authorities in order to reduce flood vulnerability.

Floods threaten urban infrastructure, especially in residential neighborhoods and fast-growing regions. Flood hydrodynamic modeling helps identify flood-prone locations and improve mitigation plans' resilience. Urban floods pose special issues due to changing land cover and a lack of raw data. Using a GIS-based modeling interface, input files for the hydrodynamic model were developed. The physical basin's properties were identified using soil map data, Land Use Land Cover (LULC) maps, and a Digital Elevation Model (DEM). So, the HEC-RAS 2-D hydrodynamic model was developed to estimate flood susceptibility and vulnerability in Erbil, Iraq. The case study examines the quality of flood modeling results using different DEM precisions. Faced with the difficulty, this study examines two building representation techniques: Building Block (BB) and Building Resistance (BR). The work presented here reveals that it is possible to apply the BR technique within the HEC-RAS 2-D to create urban flood models for regions that have a lack of data or poor data quality. Indeed, the findings confirmed that the inundated areas or areas where water accumulated in past rainfall events in Erbil are the same as those identified in the numerical simulations. The study's results indicate that the Erbil city is susceptible to flood hazards, especially in areas with low-lying topography and substantial precipitation. The study's conclusions can be utilized to plan and develop flood control structures, since it identified flood-prone areas of the city.

The growth and spread of impervious surfaces within urbanizing catchment areas pose signiificant threats to the quality of natural and built-up environments. Impervious surfaces prevent water infiltration into the soil, resulting in increased runoff generation. The Erbil Sub-basin was selected because the impervious cover is increasing rapidly and is affecting the hydrological condition of the watershed. The overall aim of this study is to examine the impact of urban growth and other changes in land use on runoff response during the study period of 1984 to 2014. The study describes long-term hydrologic responses within the rapidly developing catchment area of Erbil city, in the Kurdistan Region of Iraq. Data from six rainfall stations in and around the Erbil Sub-basin were used. A Digital Elevation Model (DEM) was also used to extract the distribution of the drainage network. Historical levels of urban growth and the corresponding impervious areas, as well as land use/land cover changes were mapped from 1984 to 2014 using a temporal satellite image (Landsat) to determine land use/land cover changes. Land use/land cover was combined with a hydrological model (SCS-CN) to estimate the volume of runoff from the watershed. The study indicates that the urbanization of the watershed has increased the impervious land cover by 71% for the period from 1984 to 2004 and by 51% from 2004 to 2014. The volume of runoff was 85% higher in 2014 as compared to 1984 due to the increase in the impervious surface area; this is attributed to urban growth. The study also points out that the slope of the watershed in the Erbil sub-basin should be taken into account in surface runoff estimation as the upstream part of the watershed has a high gradient and the land is almost barren with very little vegetation cover; this causes an increase in the velocity of the flow and increases the risk of flooding in Erbil city.

Wildfires have an important role in the ecological process affecting ecosystems at multiple spatial scales. MCD64A1 500 m burned area product is used in this study to document trends of fire events from 2001 to 2019. The research aims to analyze the trend of burned areas in the country. Iraq is selected as study area of the research because of dramatically increasing the number of fires in the country. The study found that the lowest amount of burned areas were located in the center and southwest, while northeast and north faced most of the fires. The trend of burned areas in Iraq was an increase of 71.7 km² per year, and, principally, in the last years, burned areas increased by 1363 km². The most extensive burning areas occurred in the Ninawa Governorate (29%). In 2019, burned areas increased to around eight times compared to the yearly average. During 2019, one of the highest classes which contain burned area is “Cropland, rainfed” with 4366 km² burned. High maximum air temperature and wind speed are the main factors that contribute to increasing burned areas; however, high precipitation and air pressure lead to a reducing amount of burned areas. The rapid increase of fires in the country as a result of burn crop field residues will lead to worsening air pollution and likely decrease forest area in the future.