Daily temperature variations induce phase transitions and lattice strains in halide perovskites, challenging their stability in solar cells. We stabilized the perovskite black phase and improved solar cell performance using the ordered dipolar structure of β-poly(1,1-difluoroethylene) to control perovskite film crystallization and energy alignment. We demonstrated p-i-n perovskite solar cells with a record power conversion efficiency of 24.6% over 18 square millimeters and 23.1% over 1 square centimeter, which retained 96 and 88% of the efficiency after 1000 hours of 1-sun maximum power point tracking at 25° and 75°C, respectively. Devices under rapid thermal cycling between −60° and +80°C showed no sign of fatigue, demonstrating the impact of the ordered dipolar structure on the operational stability of perovskite solar cells.
Single NV centers in HPHT IIa diamond are fabricated by helium implantation through lithographic masks. The concentrations of created NV centers in different growth sectors of HPHT are compared quantitatively. It is shown that the purest {001} growth sector (GS) of HPHT diamond allows to create groups of single NV centers in predetermined locations. The {001} GS HPHT diamond is thus considered a good material for applications that involve single NV centers.
Nitrogen-vacancy (NV) color centers in diamond are excellent quantum sensors possessing high sensitivity and nano-scale spatial resolution. Their integration in photonic structures is often desired, since it leads to an increased photon emission and also allows the realization of solid-state quantum technology architectures. Here, we report the fabrication of diamond nano-pillars with diameters up to 1000 nm by electron beam lithography and inductively coupled plasma reactive ion etching in nitrogen-rich diamonds (type Ib) with [100] and [111] crystal orientations. The NV centers were created by keV-He ion bombardment and subsequent annealing, and we estimate an average number of NVs per pillar to be 4300 ± 300 and 520 ± 120 for the [100] and [111] samples, respectively. Lifetime measurements of the NVs’ excited state showed two time constants with average values of τ1 ≈ 2 ns and τ2 ≈ 8 ns, which are shorter as compared to a single color center in a bulk crystal (τ ≈ 10 ns). This is probably due to a coupling between the NVs as well as due to interaction with bombardment-induced defects and substitutional nitrogen (P1 centers). Optically detected magnetic resonance measurements revealed a contrast of about 5% and average coherence and relaxation times of T2 [100] = 420 ± 40 ns, T2 [111] = 560 ± 50 ns, and T1 [100] = 162 ± 11 μs, T1 [111] = 174 ± 24 μs. These pillars could find an application for scanning probe magnetic field imaging.
21 August 2023 in Angewandte Chemie International Edition
Stability issues could prevent lead halide perovskite solar cells (PSCs) from commercialization despite it having a comparable power conversion efficiency (PCE) to silicon solar cells. Overcoming drawbacks affecting their long‐term stability is gaining incremental importance. Excess lead iodide (PbI2) causes perovskite degradation, although it aids in crystal growth and defect passivation. Herein, we synthesized functionalized oxo‐graphene nanosheets (Dec‐oxoG NSs) to effectively manage the excess PbI2. Dec‐oxoG NSs provide anchoring sites to bind the excess PbI2 and passivate perovskite grain boundaries, thereby reducing charge recombination loss and significantly boosting the extraction of free electrons. The inclusion of Dec‐oxoG NSs leads to a PCE of 23.7 % in inverted (p‐i‐n) PSCs. The devices retain 93.8 % of their initial efficiency after 1,000 hours of tracking at maximum power points under continuous one‐sun illumination and exhibit high stability under thermal and ambient conditions.
Dynamical decoupling multipulse sequences can be applied to solid-state spins for sensing weak oscillating fields from nearby single nuclear spins. By periodically reversing the probing system's evolution, other noises are counteracted and filtered out over the total evolution. However, the technique is subject to intricate interactions resulting in additional resonant responses, which can be misinterpreted with the actual signal intended to be measured. We experimentally characterize three of these effects present in single nitrogen-vacancy centers in diamond, where we also develop a numerical simulation model without rotating-wave approximation, showing robust correlation to the experimental data. Regarding centers with the N 15 nitrogen isotope, we observe that a small misalignment in the bias magnetic field causes the precession of the nitrogen nuclear spin to be sensed by the electronic spin of the center. Another studied case of ambiguous resonances comes from the coupling with lattice C 13 nuclei, where we use the echo modulation frequencies to obtain the interaction Hamiltonian and then utilize the latter to simulate multipulse sequences. Finally, we also measure and simulate the effects from the free evolution of the quantum system during finite pulse durations. Due to the large data volume and the strong dependence of these ambiguous resonances with specific experimental parameters, we provide a simulations data set with a user-friendly graphical interface, where users can compare simulations with their own experimental data for spectral disambiguation. Although focused on nitrogen-vacancy centers and dynamical decoupling sequences, these results and the developed model can potentially be applied to other solid-state spins and quantum sensing techniques.
Stability issues could prevent lead halide perovskite solar cells (PSCs) from commercialization despite it having a comparable power conversion efficiency (PCE) to silicon solar cells. Overcoming drawbacks affecting their long‐term stability is gaining incremental importance. Excess lead iodide (PbI2) causes perovskite degradation, although it aids in crystal growth and defect passivation. Herein, we synthesized functionalized oxo‐graphene nanosheets (Dec‐oxoG NSs) to effectively manage the excess PbI2. Dec‐oxoG NSs provide anchoring sites to bind the excess PbI2 and passivate perovskite grain boundaries, thereby reducing charge recombination loss and significantly boosting the extraction of free electrons. The inclusion of Dec‐oxoG NSs leads to a PCE of 23.7 % in inverted (p‐i‐n) PSCs. The devices retain 93.8 % of their initial efficiency after 1,000 hours of tracking at maximum power points under continuous one‐sun illumination and exhibit high stability under thermal and ambient conditions.