Sliding mode control and disturbance compensation techniques are applied to a nonlinear speed control algorithm for a permanent magnet synchronous motor (PMSM). Optimizing the speed control performance of PMSM systems with various disturbances and uncertainties is challenging. To achieve a satisfactory performance, a sliding mode control method based on the super-twisting algorithm reaching law (STRL) is presented. STRL can adapt dynamically to the variations of a controlled system. The STRL maintains a high tracking performance of the controller and allows the control input to eliminate chattering. To estimate the uncertainties and compensate for disturbances, a support vector regression-disturbance observer (SVR-DOB) is presented. The estimated uncertainties were used to minimize modeling errors and improve the disturbance rejection. A controller using SVR-DOB achieves a high precision, and the simulation results demonstrated the validity of the proposed control approach.
This paper proposes a sensorless speed control strategy for a permanent magnet synchronous motor system. Sliding mode control with a whale optimization algorithm was developed for robustness and chattering reduction. To estimate the position and speed of the rotor, an extended Kalman filter using Gaussian process regression was designed. In this controller, the whale optimization method adjusts the switching gain to minimize the tracking error. However, it provides chattering reduction and robustness, owing to the adaptive gain. The extended Kalman estimator calculates the rotor speed by using the current and voltage of the motor as an observer. The observer ensures the high reliability and low cost of the controller. The noise covariance and weight matrices that validated the performance of the estimation were optimized using a regression algorithm. The Gaussian process regression was trained to approximate the best covariance and matrices from the results of the motor controller execution. The performance of the proposed method was demonstrated through simulations under several conditions of tracking speed and load torque changes.
A modified sigmoid sliding mode control (MS-SMC) approach is proposed for stabilizing and tracking a quadrotor system with a nonlinear sliding surface, where the dynamics model is underactuated, highly coupled, and nonlinear. The constructed nonlinear sliding surface is based on the traditional sliding mode surface with a modified sigmoid function, allowing the initial value to quickly reach equilibrium. A new type of nonlinear SMC is applied for performance improvement of the quadrotor using the proposed modified sigmoid sliding surface. To control the quadrotor effectively, a double-loop control method is used to design the control rate, in which the position subsystem is the outer loop, and the attitude subsystem is the inner loop.With the Lyapunov function, the stability of the overall closed-loop system is ensured by stabilizing each subsystem step by step. Moreover, from a practical point of view, the system performance under the model uncertainties and external disturbances are also considered. The simulation results show that the proposed MS-SMC performs better than the conventional sliding mode control (CSMC) and the back-stepping sliding mode control (BS-SMC) in terms of stabilization and tracking against external disturbances.
The discrimination between earthquakes and artificial explosions is a significant issue in seismic analysis to efficiently prevent and respond to seismic events. However, the discrimination of seismic events is challenging due to the low incidence rate. Moreover, the similarity between earthquakes and artificial explosions with a local magnitude derives a nonlinear data distribution. To improve the discrimination accuracy, this paper proposes machine-learning-based seismic discrimination methods—support vector machine, naive Bayes, and logistic regression. Furthermore, to overcome the nonlinear separation problem, the kernel functions and regularized logistic regression are applied to design seismic classifiers. To efficiently design the classifier, P- and S-wave amplitude ratios on the time domain and spectral ratios on the frequency domain, which is converted by fast Fourier transform and short-time Fourier transform are selected as feature vectors. Furthermore, an adaptive synthetic sampling algorithm is adopted to enhance the classifier performance against the seismic data imbalance issue caused by the non-equivalent number of occurrences. The comparisons among classifiers are evaluated by the binary classification performance analysis methods.
In this study, we propose a hypocenter localization algorithm that uses the time difference of arrival (TDOA) and angle of arrival (AOA) as a hybrid model. The hypocenter measurements are detected by the accelerator sensors of the four separate observatories that are closest to the origin of an earthquake. The measurements are calibrated by the proposed deep learning P-onset picking system with short-time Fourier transform (STFT) signal analysis because the accurate detection of Primary waves (P-waves) is limited by seismic environmental noise. The revised measurements are used to calculate the precise distances between the observatories and hypocenters. The proposed hybrid TDOA/AOA is represented by a linear matrix equation that includes the unknowns of the precise distances, coordinates, and arrival angles to the observatories. We estimate a hypocenter using the constrained least squares method (CLS) under the constraints of the TDOA/AOA. The objective function with the constraints is optimized using the Lagrange function, and the asymptotic optimum is obtained by specifying the optimal Lagrange multipliers. Simulations show the performance of the proposed hypocenter localization method.