The acceleration of urbanization has led to an increase in urban expansion and population density, exacerbating the urban heat island (UHI) effect. Moreover, the phenomenon has a significant impact on urban ecological environments and human health. Consequently, mitigating the UHI effect and enhancing the ecological environment is crucial. However previous research has primarily focused on individual cities or regional scales, with few studies analyzing all cities within urban agglomerations. This paper conducts a fine-grained spatiotemporal analysis of surface urban heat island (SUHI) effects in the Central Yunnan City Cluster from 2000 to 2021 using Landsat satellite data. We calculate the surface urban heat island intensity (SUHII) for 44 cities at the county or district level and discuss the quantitative estimation of overall SUHII changes and driving factors in the Central Yunnan City Cluster. Our findings are as follows: 1. Small cities also exhibit UHI effects, with a 75.4% probability of occurrence in the Central Yunnan City Cluster from 2000 to 2021, resulting in an overall decrease in SUHII of 1.21 °C. 2. The temperature increase rate in urban extension areas and suburban areas is faster than that in urban central areas, which is the main reason for the decreasing trend of SUHII. 3. Land use change inhibits the weakening of the SUHI effect, and population change contributes to the formation of this phenomenon. Additionally, the methods and results of this study can provide reasonable and effective insights for the future development and planning of the Central Yunnan City Cluster, thus promoting urban sustainable development.

Forest aboveground biomass (AGB) is an important indicator for characterizing forest ecosystem structures and functions. Therefore, how to effectively investigate forest AGB is a vital mission. Airborne laser scanning (ALS) has been demonstrated as an effective way to support investigation and operational applications among a wide range of applications in the forest inventory. Moreover, three-dimensional structure information relating to AGB can be acquired by airborne laser scanning. Many studies estimated AGB from variables that were extracted from point cloud data, but few of them took full advantage of variables related to tree crowns to estimate the AGB. In this study, the main objective was to evaluate and compare the capabilities of different metrics derived from point clouds obtained from ALS. Particularly, individual tree-based alpha-shape, along with other traditional and commonly used plot-level height and intensity metrics, have been used from airborne laser scanning data. We took the random forest and multiple stepwise linear regression to estimate the AGB. By comparing AGB estimates with field measurements, our results showed that the best approach is mixed metrics, and the best estimation model is random forest (R² = 0.713, RMSE = 21.064 t/ha, MAE = 15.445 t/ha), which indicates that alpha-shape may be a good alternative method to improve AGB estimation accuracy. This method provides an effective solution for estimating aboveground biomass from airborne laser scanning.

Introduction: The selection of an optimal scale or granularity in landscape analysis is pivotal for uncovering inherent patterns and changes driven by processes. Variations in spatial resolution can significantly alter the proportions and distributions of various landscape types, thereby impacting the assessment of landscape patterns. Despite its importance, the scale factor is frequently neglected in studies focusing on long-term landscape dynamics.Methods: Bridging this gap, we utilized remote sensing imagery data from 1986 to 2020 for Lushui City, integrating remote sensing (RS) and geographic information system (GIS) technologies to generate land cover maps. Our focus centered on investigating the sensitivity of landscape pattern indices within the 30–1000m scale. Combining the first scale domain with an information loss assessment model, we identified the optimal granularity for the analysis, conducting a detailed spatiotemporal examination of landscape pattern from 1986 to 2020 using the index analysis method.Results and discussion: The results show that: (1) The dominance of forests in Lushui City, yet reveal a significant increase in construction land area over the study period, primarily driven by the conversion of forest and grassland. (2) Among the 10 examined indices, four (PD, ED, TE, and LSI) demonstrated predictable responses to changes in granularity, while three (PAFEAC, COHESION, AI) exhibited unpredictable stepwise reactions. Three indices (LPI, SHDI, PLAND) displayed minimal regularity to granularity changes. (3) The optimal long-term landscape analysis granularity for Lushui was identified as 100 m. (4) Before 1996, the city’s landscape exhibited characteristics of aggregation, good connectivity, and minimal anthropogenic disturbance. However, post-1996, the landscape experienced disruptions, leading to an overall increase in fragmentation. The expansion of cultivated land and construction land due to urbanization has intensified landscape fragmentation. However, policies such as converting cropland to forest and planned ecological civilization initiatives have restored forest coverage and improved landscape cohesion and connectivity in Lushui City. This research offers vital insights for ecological planning and resource management in alpine valley watershed cities, deepening our grasp of landscape pattern evolution.

Fertilization can improve soil nutrition and increase the yield of Sapindus mukorossi, but the response of soil microbial communities to fertilization treatments and their correlation with soil nutrition and Sapindus mukorossi yield are unclear. In order to investigate the characteristics of soil physicochemical qualities and the bacterial community, we carried out a field experiment comparing various quantities of nitrogen (N), phosphorus (P), and potassium (K) fertilizers to the unfertilized control treatments and the yield of Sapindus mukorossi in raw material forests in response to different applications of fertilizers and to try to clarify the interrelation among the three. Results showed that (1) there are significant differences in the effects of different fertilization treatments on the soil properties of Sapindus mukorossi raw material forests. The increase in the application rates of nitrogen or phosphorus fertilizers significantly reduced the soil pH value. (2) Compared with control, the α-diversity of bacterial communities was significantly lower in N₃P₂K₂ and N₁P₁K₂ treatments. Among the dominant groups of soil bacteria at the phylum level, the relative abundance of Chloroflexi showed an increase and then a decrease trend with the increase in N application. The relative abundance of Firmicutes, Bacteroidota, and Fusobacteriota was positively correlated with the application of P and K fertilizers, while the relative abundance of Acidobacteriota and Verrucomicrobiota decreased with the increase in P and K fertilizers. (3) The N₂P₂K₂ treatment produced the highest sapindus yield (1464.58 kg/ha), which increased by 258.67% above the control. (4) Redundancy analysis (RDA) showed that the primary determinants of bacterial community structure were soil pH, total K, and effective P concentration. (5) Structural equation modeling (SEM) showed that soil nutrient content was the main direct factor driving the yield of Sapindus mukorossi, whereas the bacterial community attributes (e.g., diversity and structure) had minor effects on the yield. In summary, the rational use of formulated fertilization can change the bacterial community structure, improve the bacterial diversity, and increase the soil nutrient content, with the latter exerting a significant effect on the improvement of the yield of Sapindus mukorossi.

Accurately quantifying fine-scale forest canopy-absorbed photosynthetically active radiation (APAR) is essential for monitoring forest growth and understanding ecological processes. The development of 3D radiative transfer models (3D RTMs) enables the precise simulation of canopy–light interactions, facilitating better quantification of forest canopy radiation dynamics. However, the complex parameters of 3D RTMs, particularly detailed 3D scene structures, pose challenges to the simulation of radiative information. While high-resolution LiDAR offers precise 3D structural data, the effectiveness of different tree crown reconstruction methods for APAR quantification using airborne laser scanning (ALS) data has not been fully investigated. In this study, we employed three ALS-based tree crown reconstruction methods: alphashape, ellipsoid, and voxel-based combined with the 3D RTM LESS to assess their effectiveness in simulating and quantifying 3D APAR distribution. Specifically, we used two distinct 3D forest scenes from the RAMI-V dataset to simulate ALS data, reconstruct virtual forest scenes, and compare their simulated 3D APAR distributions with the benchmark reference scenes using the 3D RTM LESS. Furthermore, we simulated branchless scenes to evaluate the impact of branches on APAR distribution across different reconstruction methods. Our findings indicate that the alphashape-based tree crown reconstruction method depicts 3D APAR distributions that closely align with those of the benchmark scenes. Specifically, in scenarios with sparse (HET09) and dense (HET51) canopy distributions, the APAR values from scenes reconstructed using this method exhibit the smallest discrepancies when compared to the benchmark scenes. For HET09, the branched scenario yields RMSE, MAE, and MAPE values of 33.58 kW, 33.18 kW, and 40.19%, respectively, while for HET51, these metrics are 12.74 kW, 12.97 kW, and 10.27%. In the branchless scenario, HET09′s metrics are 10.65 kW, 10.22 kW, and 9.79%, and for HET51, they are 2.99 kW, 2.65 kW, and 2.11%. However, differences remain between the branched and branchless scenarios, with the extent of these differences being dependent on the canopy structure. Our conclusion demonstrated that among the three tree crown reconstruction methods tested, the alphashape-based method has the potential for simulating and quantifying fine-scale APAR at a regional scale. It provides a convenient technical support for obtaining fine-scale 3D APAR distributions in complex forest environments at a regional scale. However, the impact of branches in quantifying APAR using ALS-reconstructed scenes also needs to be further considered.

With the objective of identifying superior Vernicia montana trees grounded in phenotypic and agronomic traits, this study sought to develop and implement a comprehensive evaluation method which would provide a practical foundation for future clonal breeding initiatives. Using the Vernicia montana propagated from seedling forests grown in the Suxian District of Chenzhou City in southern Hunan Province, we conducted pre-selection, primary selection, and re-selection of Vernicia montana forest stands and took the nine trait indices of single-plant fruiting quantity, single-plant fruit yield, disease and pest resistance, fruit ripening consistency, fruit aggregation, fresh fruit single-fruit weight, fresh fruit seed rate, dry seed kernel rate, and seed kernel oil content rate as the optimal evaluation indexes and carried out cluster analysis and a comprehensive evaluation in order to establish a comprehensive evaluation system for superior Vernicia montana trees. The results demonstrated that a three-stage selection process—consisting of pre-selection, primary selection, and re-selection—was conducted using a comprehensive analytical approach. The pre-selection phase relied primarily on sensory evaluation criteria, including fruit count per plant, tree size, tree morphology, and fruit clustering characteristics. Through this rigorous screening process, 60 elite plants were selected. The primary selection was based on phenotypic traits, including single-plant fruit yield, pest and disease resistance, and uniformity of fruit ripening. From this stage, 36 plants were selected. Twenty plants were then selected for re-selection based on key performance indicators, such as fresh fruit weight, fresh fruit seed yield, dry seed kernel yield, and oil content of the seed kernel. Then the re-selected optimal trees were clustered and analyzed into three classes, with 10 plants in class I, 7 plants in class II, and 3 plants in class III. In class I, the top three superior plants exhibited outstanding performance across key traits: their fresh fruit weight per fruit, fresh fruit seed yield, dry seed yield, and seed kernel oil content reached 41.61 g, 42.80%, 62.42%, and 57.72%, respectively. Compared with other groups, these figures showed significant advantages: 1.17, 1.09, 1.12, and 1.02 times the average values of the 20 reselected superior trees; 1.22, 1.19, 1.20, and 1.08 times those of the 36 primary-selected superior trees; and 1.24, 1.25, 1.26, and 1.19 times those of the 60 pre-selected trees. Fruits counts per plant and the number of fruits produced per plant of the best three plants in class I were 885 and 23.38 kg, respectively, which were 1.13 and 1.18 times higher than the average of 20 re-selected superior trees, 1.25 and 1.30 times higher than the average of 36 first-selected superior trees, and 1.51 and 1.58 times higher than the average of 60 pre-selected superior trees. Class I superior trees, especially the top three genotypes, are suitable for use as mother trees for scion collection in grafting. The findings of this study provide a crucial foundation for developing superior clonal varieties of Vernicia montana through selective breeding.