Samiul Hasan

Mr. Samiul Hasan

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 September 2021 in Journal of Materials Research
Verified
Journal Article
Closed access
PDF file
SHSamiul Hasan
Samiul Hasan
AMAbdullah Mamun
Abdullah Mamun
KHKamal Hussain
Kamal Hussain
MGMikhail Gaevski
Mikhail Gaevski
IAIftikhar Ahmed
Iftikhar Ahmed
AKAsif Khan
Asif Khan

29 June 2022 in Coatings
Verified
Journal Article
Open access
PDF file
SHSamiul Hasan
Samiul Hasan
MJMohi Uddin Jewel
Mohi Uddin Jewel
SKStavros Karakalos
Stavros Karakalos
MGMikhail Gaevski
Mikhail Gaevski
IAIftikhar Ahmed
Iftikhar Ahmed
We report a comparative spectroscopic study on the thin films of epitaxial aluminum nitride (AlN) on basal plane sapphire (Al2O3) substrates grown in hydrogen (H2) and nitrogen (N2) gas reaction environments. AlN films of similar thicknesses (~3.0 µm) were grown by metal-organic chemical vapor deposition (MOCVD) for comparison. The impact of the gas environment on the AlN epilayers was characterized using high-resolution X-ray diffraction (HR-XRD), X-ray photoelectron spectroscopy (XPS), Raman scattering (RS), secondary ion mass spectroscopy (SIMS), cathodoluminescence (CL), atomic force microscopy (AFM), and scanning electron microscopy (SEM). The study showed that AlN layers grown in a N2 environment have 50% less stress (~0.5 GPa) and similar total dislocation densities (~109/cm2) as compared to the films grown in a H2 environment. On the other hand, AlN films grown in a H2 gas environment have about 33% lesser carbon and 41% lesser oxygen impurities than films grown in a N2 growth environment. The possible mechanisms that influenced the structural quality and impurity incorporation for two different gas environments to grow AlN epilayers in the MOCVD system on sapphire substrates were discussed.

25 May 2021 in MRS Advances
Verified
Journal Article
Closed access
PDF file
SHSamiul Hasan
Samiul Hasan
AMAbdullah Mamun
Abdullah Mamun
KHKamal Hussain
Kamal Hussain
DPDhruvinkumar Patel
Dhruvinkumar Patel
MGMikhail Gaevski
Mikhail Gaevski
AKAsif Khan
Asif Khan

3 August 2022 in Electronic Materials
Verified
Journal Article
Open access
PDF file
SHSamiul Hasan
Samiul Hasan
IAIftikhar Ahmed
Iftikhar Ahmed
This article will briefly review the progress of h-BN based solid-state metal semiconductor metal (MSM) neutron detectors. In the last decade, several groups have been working on hexagonal boron nitride (h-BN)-based solid-state neutron detectors. Recently, the detection efficiency of 59% has been reported. Efficient, low-cost neutron detectors made from readily available materials are essential for various applications. Neutron detectors are widely used to detect fissile materials and nuclear power plants for security applications. The most common and widely used neutron detectors are 3He based, which are sometimes bulky, difficult to transport, have high absorption length, need relatively high bias voltage (>1000 V), and have low Q-value (0.764 MeV). In addition, 3He is not a readily available material. Thus, there is a strong need to find an alternative detection material. The 10B isotope has a high neutron absorption cross-section, and it has been tested as a coating on the semiconducting materials. Due to the two-step process, neutron capture through 10B and then electron–hole pair generation in a typical semiconducting material, the efficiency of these devices is not up to the mark. The progress in h-BN based detectors requires a review to envision the further improvement in this technology.

28 January 2023 in Crystals
Verified
Journal Article
Open access
PDF file
SHSamiul Hasan
Samiul Hasan
MJMohi Uddin Jewel
Mohi Uddin Jewel
SCScott R. Crittenden
Scott R. Crittenden
Dongkyu LeeDongkyu Lee
Dongkyu Lee
VAVitaliy Avrutin
Vitaliy Avrutin
IAIftikhar Ahmed
Iftikhar Ahmed
We report the electrical properties of Al0.3Ga0.7N/GaN heterojunction field effect transistor (HFET) structures with a Ga2O3 passivation layer grown by metal–organic chemical vapor deposition (MOCVD). In this study, three different thicknesses of β-Ga2O3 dielectric layers were grown on Al0.3Ga0.7N/GaN structures leading to metal-oxide-semiconductor-HFET or MOSHFET structures. X-ray diffraction (XRD) showed the (2¯01) orientation peaks of β-Ga2O3 in the device structure. The van der Pauw and Hall measurements yield the electron density of ~ 4 × 1018 cm−3 and mobility of ~770 cm2V−1s−1 in the 2-dimensional electron gas (2DEG) channel at room temperature. Capacitance–voltage (C-V) measurement for the on-state 2DEG density for the MOSHFET structure was found to be of the order of ~1.5 × 1013 cm−2. The thickness of the Ga2O3 layer was inversely related to the threshold voltage and the on-state capacitance. The interface charge density between the oxide and Al0.3Ga0.7N barrier layer was found to be of the order of ~1012 cm2eV−1. A significant reduction in leakage current from ~10−4 A/cm2 for HFET to ~10−6 A/cm2 for MOSHFET was observed well beyond pinch-off in the off-stage at -20 V applied gate voltage. The annealing at 900° C of the MOSHFET structures revealed that the Ga2O3 layer was thermally stable at high temperatures resulting in insignificant threshold voltage shifts for annealed samples with respect to as-deposited (unannealed) structures. Our results show that the MOCVD-gown Ga2O3 dielectric layers can be a strong candidate for stable high-power devices.

11 March 2024 in Applied Physics Letters
Verified
Journal Article
Closed access
PDF file
SHSamiul Hasan
Samiul Hasan
MJMohi Uddin Jewel
Mohi Uddin Jewel
SCScott R. Crittenden
Scott R. Crittenden
GZGhulam Zakir
Ghulam Zakir
NNNifat Jahan Nipa
Nifat Jahan Nipa
IAIftikhar Ahmed
Iftikhar Ahmed
An in situ metal-organic chemical vapor phase epitaxy is used to grow a complete AlGaN/GaN metal oxide semiconductor heterojunction field effect transistor (MOSHFET) structure, gated by a gallium oxide (Ga2O3) layer; we observed reduction in the interfacial trap density compared to its version wherein the Ga2O3 was grown ex situ, after breaking the vacuum, all else being the same. A remarkable decrease in the interfacial charge density for in situ MOSHFET structures in the range of 70%–88% for 10–30 nm oxide layer thickness and improvements in other electrical parameters required for high-performing devices were observed.