Three dimensional (3D) silicon micro- and nanostructures enable novel functionalities and better device performances in various fields. Fabrication of real 3D structures in a larger scale and wider applications has been proven to be limited by the technical difficulties during the fabrication process, which normally requires multiple process steps and techniques. Direct top-down fabrication processes by modifying a plasma etch process have been proposed and studied in previous studies. However, the repeatability, size uniformity and the maximal number of stacked layers were limited. Here we report a facile single run fabrication strategy for three dimensional silicon micro- and nanostructures. A good uniformity of suspended layer thickness has to be achieved and up to 10 stacked layers have been fabricated in a single run without other additional steps or post-process procedures. This is enabled by a modified multiplexed Bosch etch process, so called DREM (deposit, remove, etch, multistep), while the DREM etch is used to transfer the patterns into silicon, an extra isotropic etch creates a complete undercut and thus freestanding structures come into form. This method is easy to program and provides well-controlled etch profiles.
1 March 2019 in Journal of Colloid and Interface Science
Highly ordered ferromagnetic metal nanowire arrays with preferred growth direction show potential applications in electronic and spintronic devices. In this work, by employing a porous anodic aluminum oxide template-assisted electrodeposition method, we successfully prepared Ni nanowire arrays. Importantly, the growth direction of Ni nanowire arrays can be controlled by varying the current densities. The crystalline and growth orientation of Ni nanowire arrays show effects on magnetic properties. Single-crystallinity Ni nanowires with [110] orientation show the best magnetic properties, including coercivity and squareness, along the parallel direction of the nanowire axis. The current preparation strategy can be used to obtain other nanowire arrays (such as metal, alloy, and semiconductor) with controlled growth direction in confined space, and is therefore of broad interest for different applications.
Three dimensional (3D) silicon micro- and nanostructures have attracted special research interest, particularly in photonic and electrochemical devices, due to the extra degrees of freedom for manipulation of device performance and properties. However, it is still considered to be difficult to fabricate 3D silicon structures with an arbitrary geometric form in a scalable volume, especially with standard fabrication techniques, which are intrinsically directional and anisotropic. In this work we proposed a unique method of oblique-angled plasma etching from various angles, thus multilayered silicon structures with wiggling geometries can be fabricated in a controllable manner both in micro- and nanoscale. The mechanism is explained as induced modifications of substrate topology and surface charging when a glass pad is attached on the sample surface, thus the incoming ion fluxes can be directed to the substrate surface with an off-normal angle. The process is convenient to perform without additional modifications on the plasma etching systems. At the same time, it provides more possibilities in the toolkit for fabricating 3D silicon structures with conventional fabrication technologies.