As crystallization behavior has a great effect on the injection molding process, the flash differential scanning calorimetry (FSC) method was employed to study the influence of cooling rate on the crystallization behavior of a semi-crystalline polypropylene (PP). As the experimental results show, crystallization temperatures (onset crystallization temperature and maximum crystallization temperature) and crystallinity decrease as the cooling rate increases. In addition, the corresponding mathematical models were established to describe the relationship between the crystallization temperatures/crystallinity and the cooling rate. A revised Tait equation was also carried out based on the mathematical models.

Viscosity is a prominent rheological property of polymer, which is affected by temperature, pressure, shear rate, molecular structure, and other factors. Despite the importance of the pressure effect, there remains a paucity of investigations on the dependence of pressure on viscosity compared with other factors, such as shear rate and temperature. Previous research has established that the correlation between pressure and viscosity is usually expressed by the pressure coefficient. In this paper, different measurement techniques and methods for the pressure coefficient of viscosity of polymer melts are reviewed and evaluated on the basis of published experimental data. The capillary rheometer with a pressurized exit chamber is widely employed because of its accuracy and simple use. Besides, the accuracy and relationship of pressure coefficients determined by different methods are discussed.