Linkai Li

Dr. Linkai Li

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 August 2022 in Physics of Fluids
Verified
Journal Article
Closed access
PDF file
NSNanxing Shi
Nanxing Shi
YGYunsong Gu
Yunsong Gu
YZYu-Hang Zhou
Yu-Hang Zhou
LWLiang-Xiu Wang
Liang-Xiu Wang
CFChao Feng
Chao Feng
LLLinkai Li
Linkai Li
We investigated the mechanism of hysteresis and uncontrolled deflection in jet vectoring control based on the Coanda effect. Thrust vectoring control based on the Coanda effect is highly applicable in the field of fluid dynamics because they can achieve jet deflection control with a simple geometric structure and low energy consumption. However, the hysteresis and uncontrolled deflection phenomena considerably hinder the practical application of these technologies. We designed a new passive fluidic thrust vectoring control model to analyze the mechanism of these disadvantages. We developed a synchronous pressure, force, and flow field measurement system to investigate the evolutions of flow structures and their effects on wall pressure distribution and vectoring force. The characteristics of the key flow structures, including the separation bubble, the secondary flow, and the backflow, were investigated. The transient features of jet attachment and jet detachment were researched to identify the transition of near-wall flow structures and wall pressure distribution during jet uncontrolled deflection. The mechanism of uncontrolled deflection is that the formation/breakdown of the separation bubble changes the flow state of the backflow, and the near-wall mass flux balance is collapsed. This causes a dramatic change in the jet vectoring angle, which is out of the valve's control. During attachment, the shear layer first touches the wall and forms a separation bubble, and then, the bubble shrinks. During detachment, the bubble first enlarges and then breaks down. Therefore, the formation and breakdown of the separation bubble correspond to different valve positions, which is the mechanism of hysteresis.

8 December 2025 in Aerospace
Verified
Journal Article
Open access
PDF file
HZHuang Zi
Huang Zi
YGYunsong Gu
Yunsong Gu
LLLinkai Li
Linkai Li
ZWZemin Wu
Zemin Wu
YZYuhang Zhou
Yuhang Zhou
SDShuai Deng
Shuai Deng
Passive fluidic thrust vectoring nozzles feature a simple structure and low energy consumption. However, traditional 2D passive fluidic thrust vectoring nozzle suffers from jump and control reversal in thrust angle. This study proposes a trailing-edge beveled passive fluidic thrust vectoring nozzle which weakens the jump in thrust vector angle and eliminates control reversal. Experiments were conducted to obtain force angle control characteristics and jet flow structures. Results show that trailing-edge bevel angle significantly affects jet deflection control characteristics: 0° (2D nozzle) and 15° nozzles have obvious thrust vector angle jumps and control reversal, while 30°, 45°, and 60° nozzles eliminate abrupt jumps and no control reversal. However, the maximum thrust vector angle decreases gradually with increasing bevel angle. Then 2D nozzle and typical 45° trailing-edge beveled nozzle were selected for investigation. For 2D nozzle, as secondary flow channel opening difference (δ) increases, all spanwise jets deflect synchronously at δ = 0.58, generating an uncontrolled jump and entering a supercritical state in thrust vector angle. In the range of δ = 0.58~1 the supercritical state diminishes, leading to control reversal. While for 45° beveled nozzle, at δ = 0.35, the jet deflects only at the short side, which weakens thrust vector angle jump. In the range of δ = 0.35~1, jet deflection region expands and produces normal force continuously, which eliminates the thrust vector angle control reversal. The jet deflection region of the beveled nozzle has a smaller spanwise proportion than that of the 2D nozzle, resulting in a reduced maximum vectoring angle. The results show the influence of trailing-edge beveling effect on the flow structure and jet deflection control characteristics under low-speed conditions, yielding valuable insights for the optimization of the design of passive FTVC nozzles.

1 August 2022 in AIP Advances
Verified
Journal Article
Open access
PDF file
SCShaoqing Chi
Shaoqing Chi
YGYunsong Gu
Yunsong Gu
DGDongsheng Gong
Dongsheng Gong
LLLinkai Li
Linkai Li
The fluid thrust vectoring nozzle has a fixed profile, few moving parts, and lightweight structure, providing effective flight control for high maneuvering aircraft. The nonlinear control law of the jet deflection angle is one of the critical problems of fluid thrust vector technology. However, the research on the deflection control law of the thermal jet in a fluid thrust vectoring nozzle is not ideal. In this paper, the control law of micro-turbojet engines under a thermal jet is studied by numerical simulations and experiments. The numerical results show that the nonlinear control law of the jet deflection angle is caused by the vortex structure between the main jet and the nozzle wall. The numerical results show that the passive flow control method can effectively change the vortex structure distribution on the nozzle wall by changing the shape of the nozzle outlet structure. This change of flow structure can effectively make the jet deflection control law close to linear. The experimental results show that the nozzle with this configuration can continuously and controllably deflect the main jet under the thermal jet of the micro-turbojet engine. The vector deflection control law of this nozzle configuration is close to linear and has less thrust loss.

9 September 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
SLShuai Luo
Shuai Luo
LLLinkai Li
Linkai Li
KCKeming Cheng
Keming Cheng
YGYunsong Gu
Yunsong Gu
RFRuishan Fang
Ruishan Fang
WWWanbo Wang
Wanbo Wang
To provide sufficient lift during takeoff and landing, large aircraft are equipped with complicated high-lift devices. The use of simple flaps coupled with active flow control (AFC) can achieve lift improvement while reducing mechanical structure and weight. The present study focuses on verifying the feasibility and effectiveness of simple flaps combined with sweeping jet flow control. An experimental study on the AFC of flaps, using sweeping jets, was carried out using a NASA SC(2)-0410 supercritical airfoil wind-tunnel model at Re = 2.0 × 105 (with velocity V = 10 m/s). In the experiment, the wing angle of attack (α) ranged from 3 to 18°, and the flap deflection angle (δ) ranged from 0 to 30°; the aerodynamic characteristics and surface pressure characteristics of the wing at typical working conditions were analyzed. Using sweeping jets to control the flow on the flaps, the momentum coefficients (for three actuator groups) of the jet are 0.8%, 3.6%, and 8.2%, respectively, and the maximum lift coefficient was increased by approximately 33%. The influence of the sweeping jet flow rate on the aerodynamic performance of the airfoil is analyzed. There are two main reasons for the lift coefficient increase caused by sweeping jet flow: an extra suction peak near the flap and a suction peak increase near the leading edge area caused by induced flow.

1 September 2025 in Physics of Fluids
Verified
Journal Article
Closed access
YZYuhang Zhou
Yuhang Zhou
YGYunsong Gu
Yunsong Gu
LLLinkai Li
Linkai Li
ZYZihan Yang
Zihan Yang
Supersonic jet deflection control is the core of fluidic thrust vectoring technology. In particular, understanding the evolution law of jet wave structure with nozzle pressure ratio (NPR) can help to clarify the physical mechanism of jet deflection. In this study, a fluidic thrust vectoring nozzle controlled by passive secondary flow is designed. The synchronous schlieren visualization, wall pressure, and force measurement system is developed to investigate the characteristics of the jet under neutral and deflection states. Results show that under different passive secondary flow constraints, the supersonic jet exhibits three wave structure modes. Among them, asymmetric passive secondary flow constraint can cause asymmetric expansion of the jet boundary, thus realizing the deflection control of the supersonic jet. Based on this, the proportional passive secondary flow control method is proposed. When the NPR is 3.0, the maximum passive secondary flow rate is only 1.2% of the primary jet, with a maximum force vectoring angle of 8.8°, and there is no obvious hysteresis phenomenon in the entire vector control process. This control method does not need active secondary flow gas sources and has the significant advantage of simplicity in control. It is expected to play a greater role in the next generation of fluidic thrust vectoring control.

26 January 2026 in Sensors
Verified
Journal Article
Open access
PDF file
HZHuang Zi
Huang Zi
YGYunsong Gu
Yunsong Gu
QXQiuhui Xu
Qiuhui Xu
LLLinkai Li
Linkai Li
Fluidic thrust vectoring control (FTVC) enables highly agile flight without the mechanical complexity of traditional vectoring nozzles. However, a robust onboard identification of the jet deflection state remains challenging when only limited measurements are available. This study proposes a sparse reconstruction of the pressure field method for a wedge passive FTVC nozzle and validates the approach experimentally on a low-speed jet platform. By combining the proper orthogonal decomposition (POD) algorithm with an l1-regularized compressed sensing method, a full Coanda wall pressure distribution is reconstructed from the sparse measurements. A genetic algorithm is then employed to optimize the wall pressure tap locations, identifying an optimal layout. With only four pressure taps, the local pressure coefficient errors were maintained within |ΔCp| < 0.02. In contrast, conventional Kriging interpolation requires increasing the sensor count to 13 to approach the reconstruction level of the proposed POD–compressed sensing method using 4 sensors, yet still exhibits a reduced fidelity in capturing key flow structure characteristics. Overall, the proposed approach provides an efficient and physically interpretable strategy for pressure field estimation, supporting lightweight, low-maintenance, and precise fluidic thrust vectoring control.