Black soldier fly (BSF) larvae may play a role in a circular economy by upcycling low-value organic streams into high value biomass. In this paper, the capacity of BSF larvae to process 12 organic side-streams (mono-streams) and two standard substrates (chicken start mash and Gainesville diet) was investigated. Survival, larval mass, feed conversion ratio, and waste reduction were evaluated in relation to the proximate composition of the side-streams used. Survival rates larger than 80% were observed for 10 of the organic mono-streams and the two standard substrates. Maximum mean larval weight ranged from 38.3 mg up to 176.4 mg regardless of high survival and was highly correlated with substrate crude protein content. Feed conversion ratio (range 1.58–8.90) and waste reduction (range 17.0–58.9%) were similar to values reported in other studies in the literature. On low protein substrates (e.g., apple pulp), survival rates remained high, however, possibly due to protein deficiency, limited larval growth was observed. It is concluded that several low value organic side-streams can successfully be processed by BSF larvae, thereby opening the possibility of lowering the costs of BSF farming. Potentially mixing nutritionally distinct mono-streams into a mixed substrate might improve BSF performance. However, more research is needed for optimizing diets to guarantee production of BSF larvae of constant yield and quality.

Due to increasing welfare and population, the demand for alternative protein sources, obtained with minimal use of natural resources, is rising in today’s society. Insects have the potential to be used as an alternative protein source since they are considered to be able to convert low-value biomass into high-value components, resulting in opportunities for valorisation of organic side streams. Moreover, insects are suggested to be a sustainable protein source, referring to the efficient “feed to body” mass conversion potential. The aim of this review was to explore the potential to rear the yellow mealworm (Tenebrio molitor), the house cricket (Acheta domesticus) and the migratory locust (Locusta migratoria) on low or not yet valorised organic side streams within the food supply chain. This was performed by collecting research information focusing on the rearing of the insects in scope on organic biomass. In addition, the nutritional composition of the produced insects as well as their dietary requirements will be reviewed. Finally, the availability of side streams in the EU will be discussed as well as their potential to be used as insects feed.

There is a growing interest in the ability of black soldier fly (Hermetia illucens) larvae (BSFL) to convert low-value organic residues into high-value products. This leads to more publications with conversion data for various organic resources. However, these results are rarely comparable between laboratories due to differences in study protocols. This hinders comparisons among studies, the use of results in practice, and overall advancement in BSFL conversion research. Therefore, a standardised research protocol was developed for nursing, rearing and harvesting of BSFL for feed assessment. The utility of this protocol, was assessed via an international ring test with 9 partners. One batch of Gainesville diet (wheat bran (50%), alfa-alfa (30%) and maize (20%)) was produced and distributed among the partners to avoid dietary variations. Five-day-old BSFL larvae were used for the growth trial with six replicates per partner. Average larval weight was assessed after 3 days, 7 days, and harvest (>10% prepupae). Total yield and frass were recorded, and samples were chemically analysed to allow the quantification of the conversion efficiency. The results were used to calculate the within and between partner variability of the protocol. The results indicate that for the biological parameters (average weight, yield and density) the within partner variability was 24% and the between partner variability was 60%. For the assessed chemical parameters (N, fat, ash, P, K, pH), both the within and between variability was lower (respectively 9 and 28%). The results of this study give a first indication of the variability that can be expected within and between BSFL feeding experiments for different parameters and can therefore serve as guideline when developing a new experimental designs, assess standard operating procedures and other applications. The protocol can be used as first basis for future feed experiments, improving the comparability of results.

Insects are receiving a lot of attention as an alternative protein source, especially the black soldier fly, Hermetia illucens. This insect is of particular interest due to its potential as a waste converter as it can be grown on low-value organic substrates, such as agricultural side-streams, manure and decomposing materials. It’s capacity to turn low-value biomass into high-quality protein provide new opportunities in organic waste management. Unfortunately, rearing of black soldier fly larvae (BSFL) does not run efficiently on most substrates. Several parameters influence the rearing efficiency of BSFL. One of the parameters that is often overlooked is the moisture content of the substrate and the physical properties, such as water release/holding, associated with it. In this study the water release properties of 3 BSFL feeds, each at a dry matter content ranging from 10 to 90%, were investigated using 4 different methods, being water release by (1) filtration, (2) sedimentation, (3) syneresis and (4) centrifugation. Rearing of BSFL on the substrates with different dry matter content showed that water release influences larval performance and survival. Moreover, correlating survival to water release indicated that when substrates are hydrated to the minimum dry matter content, at which no water release is measured by the sedimentation method, the highest BSFL survival can be achieved for that substrate. In addition, a standardised method for determining the most optimal dry matter content of substrates based on substrate water holding capacity was developed.

Due to the expansion in the global population, there is an increase in animal protein demand and waste generation. Currently, food waste derived from supermarkets, etc., which is used to produce biogas, is collected separately and can contain (micro)plastics deriving from food packaging, imposing potential risks to the environment. A possible solution to address protein, waste and plastic concerns can potentially be achieved by rearing black soldier fly (BSF) larvae on such substrates. In this study, we investigated the effect of polyvinyl chloride (PVC) (micro)plastics on the growth, survival, and bioconversion of BSF larvae. On the other hand, the impact of the larvae on the polymer structure and degradation was also assessed. This was carried out by rearing BSF larvae on artificial food waste spiked with micro-, meso-, and macroplastics, while measuring larval growth, survival, and bioconversion parameters. The remaining plastics were collected and analysed upon changes and degradation of their polymer structure. Generally, BSF larvae were not affected in terms of growth performance (179.9–210.4 mg), survival (77.1–87.3%), and bioconversion (FCR: 4.65–5.53) by the presence of (micro)plastics in the substrates. Furthermore, the larvae were also unable to significantly alter the polymer structure of the used plastic.

Whereas the production of conventional livestock can rely on years of knowledge and experience, the mealworm production industry is still in its early stages. Although the yellow mealworm Tenebrio molitor has been cultivated as feed for pets and zoo animals for quite some time, the optimization of the reproduction process has not been widely explored. For reproduction, beetles are placed in crates supplemented with a substrate to oviposit their eggs. After a specified time, the beetles are removed, and the eggs are further cultivated to develop into larvae. Factors such as oviposition duration and beetle density influence the number of produced mealworms per beetle, partly due to the cannibalistic behavior of the beetles. However, reproductive success has mostly been assessed by determining the number of offspring several weeks after oviposition. As a result, the number of eggs laid and their hatch rates are unknown. In this research, eggs are separated from the oviposition substrate, i.e., harvested. This approach allows to determine the influence of beetle density, oviposition duration, beetle age and the use of a grid during oviposition on the number of eggs produced and the egg hatching rate and timing thereof. In addition, the influence of the harvesting method on the hatching of T. molitor′s eggs was determined.