The expected global population growth to 9.7 billion people in 2050 and the significant change in global dietary patterns require an increase in global food production by about 60%. The protein supply for feed and food is most critical and requires an extension in protein sources. Edible insects can upgrade low-grade side streams of food production into high-quality protein, amino acids and vitamins in a very efficient way. Insects are considered to be the “missing link” in the food chain of a circular and sustainable economy. Insects and insect-derived products have entered the European market since first being acknowledged as a valuable protein source for feed and food production in around 2010. However, today, scaling up the insect value chain in Europe is progressing at a relatively slow pace. The mission of SUSINCHAIN (SUStainable INsect CHAIN)—a four-year project which has received funding from the European Commission—is to contribute to novel protein provision for feed and food in Europe by overcoming the remaining barriers for increasing the economic viability of the insect value chain and opening markets by combining forces in a comprehensive multi-actor consortium. The overall project objective is to test, pilot and demonstrate recently developed technologies, products and processes, to realize a shift up to Technology Readiness Level 6 or higher. In addition to these crucial activities, the project engages with stakeholders in the insect protein supply chain for feed and food by living labs and workshops. These actions provide the necessary knowledge and data for actors in the insect value chain to decrease the cost price of insect products, process insects more efficiently and market insect protein applications in animal feed and regular human diets that are safe and sustainable. This paves the way for further upscaling and commercialization of the European insect sector.
Due to increasing welfare and population, the demand for alternative protein sources, obtained with minimal use of natural resources, is rising in today’s society. Insects have the potential to be used as an alternative protein source since they are considered to be able to convert low-value biomass into high-value components, resulting in opportunities for valorisation of organic side streams. Moreover, insects are suggested to be a sustainable protein source, referring to the efficient “feed to body” mass conversion potential. The aim of this review was to explore the potential to rear the yellow mealworm (Tenebrio molitor), the house cricket (Acheta domesticus) and the migratory locust (Locusta migratoria) on low or not yet valorised organic side streams within the food supply chain. This was performed by collecting research information focusing on the rearing of the insects in scope on organic biomass. In addition, the nutritional composition of the produced insects as well as their dietary requirements will be reviewed. Finally, the availability of side streams in the EU will be discussed as well as their potential to be used as insects feed.
9 March 2021 in Journal of Insects as Food and Feed
Mealworm larvae have the potential to be a future food and feed. One of the difficulties in rearing mealworms efficiently, is their need for both dry and wet feed. Extensive research has been done on dry feed and distributing this feed is easy with the existing technology. However, the wet feed (frequently chopped up vegetables) comes with several challenges. The nature of the wet feed (neither solid nor liquid) complicates automation, making manual feeding still the norm in many farms. This may result in an unequal distribution of the wet feed. The goal of this study was to assess the influence of distance to the wet feed (substituted by agar) on density, growth rate and growth rate variability of mealworm larvae. The entire larval growth stage was assessed from less than 1 mg up to more than 100 mg, as differences in mobility were expected for different sized larvae. The results indicate that the distribution of the agar plays a major role in the distribution and growth of the larvae, with less larvae and a decrease in growth rate observed when the agar was more than 5 to 10 cm away from the larvae. Few mealworms were found more than 15 cm from the agar, and their growth was inhibited resulting in a biomass up to 150 times lower than near the agar. The effects were mainly observed in larvae weighing less than 30 mg, heavier mealworms were mobile enough to crawl to and from the agar. Based on the results, and in order to ensure that all larvae sizes grow equally well and are well distributed in the crate, we strongly advise against distances of 10 cm or more and we recommend the placement of wet feed within 5 cm from the larvae.
1 October 2023 in Journal of Insects as Food and Feed
There is a growing interest in the ability of black soldier fly (Hermetia illucens) larvae (BSFL) to convert low-value organic residues into high-value products. This leads to more publications with conversion data for various organic resources. However, these results are rarely comparable between laboratories due to differences in study protocols. This hinders comparisons among studies, the use of results in practice, and overall advancement in BSFL conversion research. Therefore, a standardised research protocol was developed for nursing, rearing and harvesting of BSFL for feed assessment. The utility of this protocol, was assessed via an international ring test with 9 partners. One batch of Gainesville diet (wheat bran (50%), alfa-alfa (30%) and maize (20%)) was produced and distributed among the partners to avoid dietary variations. Five-day-old BSFL larvae were used for the growth trial with six replicates per partner. Average larval weight was assessed after 3 days, 7 days, and harvest (>10% prepupae). Total yield and frass were recorded, and samples were chemically analysed to allow the quantification of the conversion efficiency. The results were used to calculate the within and between partner variability of the protocol. The results indicate that for the biological parameters (average weight, yield and density) the within partner variability was 24% and the between partner variability was 60%. For the assessed chemical parameters (N, fat, ash, P, K, pH), both the within and between variability was lower (respectively 9 and 28%). The results of this study give a first indication of the variability that can be expected within and between BSFL feeding experiments for different parameters and can therefore serve as guideline when developing a new experimental designs, assess standard operating procedures and other applications. The protocol can be used as first basis for future feed experiments, improving the comparability of results.
1 February 2022 in Journal of Insects as Food and Feed
An appropriate stocking density is beneficial to run an efficient business and improve animal welfare. In most traditional livestock this is defined as the number of animals per area. However, the larvae of the mealworm (Tenebrio molitor), one of the most important commercial insects, live both on top and inside their feed. In this study we assessed if different areal stocking densities (2D, range 0.6-10.4 larvae/cm2) resulted in a different growth rate and feed efficiency when the volumetric stocking density remained constant (1 larvae/cm3). In a first experiment the larvae received wheat bran once at the start, but in the second experiment wheat bran was added throughout the experiment to ensure that the larvae remained at 1 larvae/cm3. The results indicate that, given a stable volumetric density, the areal density can vary between 0.6 and 10.4 larvae/cm2 without extreme variation in growth, survival or feed efficiency. The lowest assessed densities did result in a slightly lower average weight and yield. A maximum yield per volume of feed was observed at 2.5 larvae/cm2 (feed conversion ratio (FCR) of 1.76 dry feed/live larvae). Yet, the overall highest yield was observed at 10.4 larvae/cm2 as the increased areal density far outweighed the slight decrease in FCR. In conclusion: when mealworm larvae are provided with an equal volume of wheat bran the influence of areal density is low and could be as high as 10.4 larvae/cm2 for optimal yield.
Tenebrio molitor larvae live, at least partially, inside their feed. Hence, they do not live on a 2D plane but in a 3D environment. However, previous studies mainly focused on the optimal number of larvae for a given surface area, not the available volume. The goal of this study was to assess the growth and survival of mealworms in a standardized semi-industrial setting with a varying density (cm3) and substrate height. A full factorial experimental design was used with five larval densities (0.5–8 larvae/cm3) and four feed heights (1–8 cm) in 60 × 40 cm crates. Furthermore, the in-crate temperature was monitored and linked to the density. The results of this study clearly indicate that mealworm larvae prefer a low density (cm3). At low larvae densities, the substrate height was less important, with a slight preference for a thicker layer. In contrast, at high(er) larval densities, a lower layer thickness resulted in better growth. The in-crate week temperature varied up to 14 °C (25–39 °C) between treatments and could be predicted well based on the number and size of the larvae. These results may help the industry to improve their production efficiency in terms of larvae density, substrate height and room temperature.