The aim of this review is to analyze and to summarize the state of the art of the processing of aluminum alloys, and in particular of the AlSi10Mg alloy, obtained by means of the Additive Manufacturing (AM) technique known as Selective Laser Melting (SLM). This process is gaining interest worldwide, thanks to the possibility of obtaining a freeform fabrication coupled with high mechanical properties related to a very fine microstructure. However, SLM is very complex, from a physical point of view, due to the interaction between a concentrated laser source and metallic powders, and to the extremely rapid melting and the subsequent fast solidification. The effects of the main process variables on the properties of the final parts are analyzed in this review: from the starting powder properties, such as shape and powder size distribution, to the main process parameters, such as laser power and speed, layer thickness, and scanning strategy. Furthermore, a detailed overview on the microstructure of the AlSi10Mg material, with the related tensile and fatigue properties of the final SLM parts, in some cases after different heat treatments, is presented.

Additive manufacturing technologies are currently envisaged to boost the development of a next generation of microwave and millimeter-wave devices intended for, among others, satellite telecommunications, navigation, imaging, radio-astronomy, and cosmology. Due to their excellent electromagnetic and mechanical properties, all-metal waveguide components are key building blocks of several radio frequency (RF) systems used in these application domains. This article reports on the prospects originating from the application of all-metal 3D printing to the manufacturing of high-performance microwave waveguide devices. The technology investigated is the selective laser melting process, where a laser beam is used to fuse metal powder particles spread over a building platform. The complete parts are built by overlapping several constant-thickness layers. An overview on process parameters, material properties, and design rules is reported for this technology. The electromagnetic properties of test samples built in Al and Ti alloys have been experimentally characterized. A robust design of Ku/K-band filters aimed at satellite telecommunications has been implemented in several prototypes manufactured in Al. The corresponding measured performance confirm the applicability of the laser selective melting process to the intended applications.

Additive manufacturing (i.e., 3D printing) has rapidly developed in recent years. In the recent past, many researchers have highlighted the development of in-house filaments for fused filament fabrication (FFF), which can extend the corresponding field of application. Due to the limited mechanical properties and deficient functionality of printed polymer parts, there is a need to develop printable polymer composites that exhibit high performance. This study analyses the actual mechanical characteristics of parts fabricated with a low-cost printer from a carbon fibre-reinforced nylon filament. The results show that the obtained values differ considerably from the values presented in the datasheets of various filament suppliers. Moreover, the hardness and tensile strength are influenced by the building direction, the infill percentage, and the thermal stresses, whereas the resilience is affected only by the building direction. Furthermore, the relationship between the mechanical properties and the filling factor is not linear.