Elisabetta Morici

Dr. Elisabetta Morici


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 October 2022 in Polymers
Verified
Journal Article
Open access
PDF file
EMElisabetta Morici
Elisabetta Morici
Nadka Tzankova DintchevaNadka Tzankova Dintcheva
Nadka Tzankova Dintcheva
Thermoset materials and their composites are characterized by a long life cycle with their main applications in aircrafts, wind turbines and constructions as insulating materials. Considering the importance of recovery and valorization of these materials at their end-of-life, avoiding landfilling, the interest concerning their recycling grows continuously. The thermoset materials and their composites, to be successfully recovered and valorized, must degrade their three-dimensional structures and recover the mono-oligomers and/or fillers. The thermoset materials could successfully degrade through thermal treatment at different temperatures (for example, above 1000 °C for incineration, ca. 500 °C for oxidation/combustion of organic constituents, etc.), chemical degradation by catalyst, irradiation with or without the presence of water, alcohol, etc., and mechanical recycling, obtaining fine particles that are useful as filler and/or reinforcement additives. Among these recycling methods, this mini-review focuses on the formulation and recovery method of innovative thermoset with in-build recyclability, i.e., materials having chemical links that could be degraded on-demand or containing dynamic covalent bonds to have re-processable and/or recyclable thermoset. This issue could be considered the future perspective in developing novel thermoset materials. The aim of this review is to get an overview of the state of the art in thermoset recycling and of the most commonly used thermoset composites, recovering valuable reinforcing fibers. Additionally, in this work, we also report not only known recycling routes for thermoset and thermoset-based composites, but also new and novel formulating strategies for producing thermosets with built-in recyclability, i.e., containing chemical-triggered on-demand links. This mini-review is also a valuable guide for educational purposes for students and specialized technicians in polymer production and recycling.

12 June 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
Nadka Tzankova DintchevaNadka Tzankova Dintcheva
Nadka Tzankova Dintcheva
EMElisabetta Morici
Elisabetta Morici
CCClaudio Colletti
Claudio Colletti
In the last two decades, the continuous, ever-growing demand for energy has driven significant development in the production of photovoltaic (PV) modules. A critical issue in the module design process is the adoption of suitable encapsulant materials and technologies for cell embedding. Adopted encapsulants have a significant impact on module efficiency, stability, and reliability. In addition, to ensure the unchanged performance of PV modules in time, the encapsulant materials must be selected properly. The selection of encapsulant materials must maintain a good balance between the encapsulant performance in time and costs, related to materials production and technologies for cells embedding. However, the encapsulants must ensure excellent isolation of active photovoltaic elements from the environment, preserving the PV cells against humidity, oxygen, and accidental damage that may compromise the PV module’s function. This review provides an overview of different encapsulant materials, their main advantages and disadvantages in adoption for PV production, and, in relation to encapsulant technologies used for cell embedding, additives and the interaction of these materials with other PV components.

16 May 2022 in Polymers
Verified
Journal Article
Open access
PDF file
EMElisabetta Morici
Elisabetta Morici
Sabrina CarroccioSabrina Carroccio
Sabrina Carroccio
EBElena Bruno
Elena Bruno
Paola ScarfatoPaola Scarfato
Paola Scarfato
GFGiovanni Filippone
Giovanni Filippone
Nadka Tzankova DintchevaNadka Tzankova Dintcheva
Nadka Tzankova Dintcheva
Today’s world is at the point where almost everyone realizes the usefulness of going green. Due to so-called global warming, there is an urgent need to find solutions to help the Earth and move towards a green future. Many worldwide events are focusing on the global technologies in plastics, bioplastic production, the recycling industry, and waste management where the goal is to turn plastic waste into a trade opportunity among the industrialists and manufacturers. The present work aims to review the recycling process via analyzing the recycling of thermoplastic, thermoset polymers, biopolymers, and their complex composite systems, such as fiber-reinforced polymers and nanocomposites. Moreover, it will be highlighted how the frame of the waste management, increasing the materials specificity, cleanliness, and a low level of collected material contamination will increase the potential recycling of plastics and bioplastics-based materials. At the same time, to have a real and approachable trade opportunity in recycling, it needs to implement an integrated single market for secondary raw materials.

29 July 2022 in Polymers
Verified
Journal Article
Open access
PDF file
Giulia InfurnaGiulia Infurna
Giulia Infurna
Luigi BottaLuigi Botta
Luigi Botta
MMMarco Maniscalco
Marco Maniscalco
EMElisabetta Morici
Elisabetta Morici
GCGiuseppe Caputo
Giuseppe Caputo
Nadka Tzankova DintchevaNadka Tzankova Dintcheva
Nadka Tzankova Dintcheva
In the context of sustainable and circular economy, the recovery of biowaste for sustainable biocomposites formulation is a challenging issue. The aim of this work is to give a new life to agricultural carob waste after glucose extraction carried out by a local factory for carob candy production. A pyrolysis process was carried out on bio-waste to produce biofuel and, later, the solid residual fraction of pyrolysis process was used as interesting filler for biocomposites production. In this work, biochar particles (BC) as a pyrolysis product, after fuels recovery of organic biowaste, specifically, pyrolyzed carobs after glucose extraction, were added on poly(butylene-adipate-co-terephthalate), (PBAT), at two different concentrations, i.e., 10 and 20 wt%. The BC have been produced using three pyrolysis processing temperatures (i.e., 280, 340 and 400 °C) to optimize the compositions of produced solid fractions and biofuels. The resulting particles from the pyrolysis process (BC280, BC340 and BC400) were considered as suitable fillers for PBAT. Firstly, the BC particles properties were characterized by elemental composition and spectroscopy analysis, particle size measurements and evaluation of radical scavenging activity and efficiency. Moreover, PBAT/BC composites were subjected to analysis of their rheological and thermal behavior, morphologies and mechanical properties. In addition, accelerated weathering, monitored by both tensile test and spectroscopic analysis, was carried out, and obtained results show that the biochar particles can exert a beneficial effect on photo-oxidation delay of PBAT matrix.

27 March 2024 in Polymers
Verified
Journal Article
Open access
PDF file
EMElisabetta Morici
Elisabetta Morici
GPGiuseppe Pecoraro
Giuseppe Pecoraro
Sabrina CarroccioSabrina Carroccio
Sabrina Carroccio
EBElena Bruno
Elena Bruno
Paola ScarfatoPaola Scarfato
Paola Scarfato
Nadka Tzankova DintchevaNadka Tzankova Dintcheva
Nadka Tzankova Dintcheva
Biopolymers are of growing interest, but to improve some of their poor properties and performance, the formulation of bio-based blends and/or adding of nanoparticles is required. For this purpose, in this work, two different metal oxides, namely zinc oxide (ZnO) and titanium dioxide (TiO2), at different concentrations (0.5, 1, and 2%wt.) were added in polylactic acid (PLA) and polylactic acid/polyamide 11 (PLA/PA11) blends to establish their effects on solid-state properties, morphology, melt behaviour, and photo-oxidation resistance. It seems that the addition of ZnO in PLA leads to a significant reduction in its rigidity, probably due to an inefficient dispersion in the melt state, while the addition of TiO2 does not penalize PLA rigidity. Interestingly, the addition of both ZnO and TiO2 in the PLA/PA11 blend has a positive effect on the rigidity because of blend morphology refinement and leads to a slight increase in film hydrophobicity. The photo-oxidation resistance of the neat PLA and PLA/PA11 blend is significantly reduced due to the presence of both metal oxides, and this must be considered when designing potential applications. The last results suggest that both metal oxides could be considered photo-sensitive degradant agents for biopolymer and biopolymer blends.

2 April 2023 in Molecules
Verified
Journal Article
Open access
PDF file
Nadka Tzankova DintchevaNadka Tzankova Dintcheva
Nadka Tzankova Dintcheva
EMElisabetta Morici
Elisabetta Morici
Considering the circular principles of materials and investigating the possibility to use waste materials before their final disposal, in this work, dry rose flower (DRF) and rose flower waste (RFW), after oil extraction, have been considered as suitable materials for the formulation of biopolymer packaging films. Both DRF and RFW particles have been characterized by spectroscopy analysis, and their radical scavenger ability has been investigated. Moreover, DRF and RFW particles have been added by melt mixing to PolyLactic Acid (PLA), and formulated PLA-based films have been studied through rheology analysis, mechanical test, differential scanning calorimetry, and microscopy observations. Finally, the influence of both DRF and RFW particles on the photo-oxidation behavior of PLA has been evaluated by subjecting thin films to UVB exposure, and the progress of degradation has been monitored following the accumulations of oxygen-containing groups in time. Obtained results suggest that both DRF and RFW have a beneficial effect on the photo-oxidation behavior of PLA, and they can slow down PLA degradation upon UVB exposure. Therefore, PLA-based composite materials could be considered a good candidate for applications as packaging films.