In the coming years, climate change is predicted to impact irrigation water demand considerably, particularly in semi-arid regions. The aim of this research is to investigate the expected adverse impacts of climate change on water irrigation management in Saudi Arabia. We focus on the influence of climate change on irrigation water requirements in the Al Quassim (97,408 ha) region. Different climate models were used for the intermediate emission SSP2-4.5 and the high emission SSP5-8.5 Coupled Model Intercomparison Project Phase 6 (CMIP6) scenarios. The FAO-CROPWAT 8.0 model was used to calculate reference evapotranspiration (ETo) using weather data from 13 stations from 1991 to 2020 and for both the SSP2-4.5 and SSP5-8.5 scenarios for the 2040s, 2060s, 2080s, and 2100s. The findings indicated that, for the 2100s, the SSP2-4.5 and SSP5-8.5 scenarios forecast annual average ETo increases of 0.35 mm/d (6%) and 0.7 mm/d (12.0%), respectively. Net irrigation water requirement (NIWR) and growth of irrigation water requirement (GIWR) for the main crops in the Al Quassim region were assessed for the current, SSP2-4.5, and SSP5-8.5 scenarios. For SSP5-8.5, the GIWR for the 2040s, 2060s, 2080s, and 2100s are expected to increase by 2.7, 6.5, 8.5, and 12.4%, respectively, compared to the current scenario (1584.7 million m³). As a result, there will be higher deficits in 2100 under SSP5-8.5 for major crops, with deficits of 15.1%, 10.7%, 8.3%, 13.9%, and 10.7% in the crop areas of wheat, clover, maize, other vegetables, and dates, respectively. Optimal irrigation planning, crop pattern selection, and modern irrigation technologies, combined with the proposed NIWR values, can support water resources management. The findings can assist managers and policymakers in better identifying adaptation strategies for areas with similar climates.

Natural gas extraction is a greener solution to world energy resource depletion and water-based hydraulic fracturing is traditionally used to produce gas from deep and tight geological formations. However, since this practice fails to produce a commercially viable amount of gas and raises many environmental issues, better alternatives are being tested in the field, among which the usage of foam-based fluid is a comparatively novel but effective technique. The aim of this review is to understand the current opinion on foam-based fluid fracturing, its merits and demerits and the associated environmental footprint. Foams are made by mixing a gas phase with a liquid phase using a suitable surfactant, and the foam quality is composition-dependent, with high quality foams having higher percentages of gas. The properties of the injecting foam, including its rheology and viscosity, are important for the fracturing process. According to current studies, foams have two separate flow regimes (low and high quality) and a unique multiphase flow pattern. Foam viscosity should be low to enter the ends of the fracture and high to have a good proppant-carrying capacity. Greater proppant-carrying capacity, lower water consumption and chemical usage, quicker and easier fluid flowback and less environmental damage are the advantages of foam-based fracturing, and lack of knowledge, high capital cost, and potential damage to the environment from surfactants are the limitations. However, foam-based fracturing has been tested in very few locations to date.

Since early ages, people tried to predicate earthquakes using simple observations such as strange or atypical animal behavior. In this paper, we study data collected from past earthquakes to give better forecasting for coming earthquakes. We propose the application of artificial intelligent predication system based on artificial neural network which can be used to predicate the magnitude of future earthquakes in northern Red Sea area including the Sinai Peninsula, the Gulf of Aqaba, and the Gulf of Suez. We present performance evaluation for different configurations and neural network structures that show prediction accuracy compared to other methods. The proposed scheme is built based on feed forward neural network model with multi-hidden layers. The model consists of four phases: data acquisition, pre-processing, feature extraction and neural network training and testing. In this study the neural network model provides higher forecast accuracy than other proposed methods. Neural network model is at least 32% better than other methods. This is due to that neural network is capable to capture non-linear relationship than statistical methods and other proposed methods

Flash floods, rapid and devastating inundations of water, are increasingly linked to the intensifying effects of climate change, posing significant challenges for both vulnerable communities and sustainable environmental management. The primary goal of this research is to investigate and predict a Flood Susceptibility Map (FSM) for the Ibaraki prefecture in Japan. This research utilizes a Random Forest (RF) regression model and GIS, incorporating 11 environmental variables (involving elevation, slope, aspect, distance to stream, distance to river, distance to road, land cover, topographic wetness index, stream power index, and plan and profile curvature), alongside a dataset comprising 224 instances of flooded and non-flooded locations. The data was randomly classified into a 70 % training set for model development, with the remaining 30 % used for model validation through Receiver Operating Characteristics (ROC) curve analysis. The resulting map indicated that approximately two-thirds of the prefecture as exhibiting low to very low flood susceptibility, while approximately one-fifth of the region is categorized as high to very high flood susceptibility. Furthermore, the RF model achieved a noteworthy validation with an area under the ROC curve of 99.56 %. Ultimately, this FSM serves as a crucial tool for policymakers in guiding appropriate spatial planning and flood mitigation strategies.