Artificial intelligence techniques for pneumatic robot manipulators have become of deep interest in industrial applications, such as non-high voltage environments, clean operations, and high power-to-weight ratio tasks. The principal advantages of this type of actuator are the implementation of clean energies, low cost, and easy maintenance. The disadvantages of working with pneumatic actuators are that they have non-linear characteristics. This paper proposes an intelligent controller embedded in a programmable logic device to minimize the non-linearities of the air behavior into a 3-degrees-of-freedom robot with pneumatic actuators. In this case, the device is suitable due to several electric valves, direct current motors signals, automatic controllers, and several neural networks. For every degree of freedom, three neurons adjust the gains for each controller. The learning process is constantly tuning the gain value to reach the minimum of the mean square error. Results plot a more appropriate behavior for a transitive time when the neurons work with the automatic controllers with a minimum mean error of $\pm 1.2$ mm.

The precision of robotic manipulators in the industrial or medical field is very important, especially when it comes to repetitive or exhaustive tasks. Geometric deformations are the most common in this field. For this reason, new robotic vision techniques have been proposed, including 3D methods that made it possible to determine the geometric distances between the parts of a robotic manipulator. The aim of this work is to measure the angular position of a robotic arm with six degrees of freedom. For this purpose, a stereo camera and a convolutional neural network algorithm are used to reduce the degradation of precision caused by geometric errors. This method is not intended to replace encoders, but to enhance accuracy by compensating for degradation through an intelligent visual measurement system. The camera is tested and the accuracy is about one millimeter. The implementation of this method leads to better results than traditional and simple neural network methods.