The paper presents a practical and relevant analytical calculation model for free turbine turboshaft working regimes and engine performance. The analytical calculation model is based on a post-processing method that analyzes a series of experimental data, specifically focusing on the percentage variations of the engine’s main parameters from the minimum to the takeoff working regime. The experimental data were acquired from three different types of engines: TV2-117A turboshaft, AI-20K turboprop, and Viper 632-41 turbojet. The analysis method aimed to identify, through calculations, certain similarity parameters that exhibit nearly constant variations or variations within tight limits. These parameters can then be used as approximate constants in the calculation model. By utilizing these constants related to similarity parameters, a mathematical connection between different engine regimes is established; more exactly, for the engine data from a known to unknown regime. In the current case, only the engine data from the takeoff regime are requested to be known, and in this way, the other working regimes of several engines can be calculated.
The paper presents a detailed study of certain working regimes of a TV2-117A turboshaft engine, based on practical research using experimental data following the engine run tests. The engine run tests were made into the test bench, using a hydraulic dynamometer to vary the load on the free power turbine and to measure the main working turbine parameters, and by operating the dynamometer, different engine working regimes are obtained. To accomplish the experimental tests, the execution of an additional instrumentation of the engine was conducted and, through a digital acquisition and controller system, a series of engine parameters were measured. The detailed study of the working regimes concerned the examination of a variation of the engine main parameters and performances at various regimes, from the idle (a) to the takeoff (b), including cruise (b) and maximum continuous (c) regimes, and presented the actual values and curve variation diagrams of the measured data and the experimental results in order to create a base comparison with the regimes values from the engine manual.
This paper presents an analytical method to determine various main parameters or performances of engine components when those parameters cannot be directly measured and it is necessary to determine them. Additionally, some variants of instrumentation methods are presented, for example: engine inlet, compressor, turbine or jet nozzle instrumentation. The purpose of the instrumentation methods is to directly measure the possible parameters, which are then used as inputs in a model to determine other parameters or performance metrics. This model is based on gasodynamic process equations, and it is used to compute the air and gas parameters, such as enthalpy and entropy, which are described in polynomial form, thus leading to a more realistic calculation. At the end, this paper presents a practical example of instrumentation applied on a Klimov TV2-117A turboshaft, with a series of experimental results, following the engine testing on the test bench.
To investigate the functionality and performance of a prototype microjet engine, we constructed a versatile test stand tailored to the specifications of a 400 N prototype. This test stand facilitated a comprehensive study by enabling real-time recording of 45 essential parameters for analysis, encompassing temperatures, pressures, speed, fuel flow, thrust, vibration, and various other monitored metrics. All parameters and control elements were seamlessly integrated via a data acquisition and control system, utilizing a compactDAQ (Data Acquisition) system from National Instruments and a custom Virtual Instrument programmed with graphical language. The test stand offers both manual and automated operation modes, with the flexibility for hybrid operation. For instance, following the idle regime, manual control using a potentiometer can seamlessly transition from automated control via a proportional control (P control) mechanism. Before the experimental campaign, rigorous verification and validation tests were conducted to ensure the reliability and accuracy of the setup. The experimental campaign comprised a series of manual tests focusing on the fuel system and automated tests covering starting, idle, working, and stopping regimes. This structured approach allowed for a comprehensive evaluation across different operational scenarios, providing insights into the engine’s behavior and performance under varying conditions.
15 August 2024 in Tehnicki vjesnik - Technical Gazette
This paper presents a study on the transition of a didactic piston engine from analogue instrumentation to digital. The T81M piston engine, paired with the T82M dynamometer, both manufactured by Didacta Italia, underwent supplementary instrumentation...
1 August 2021 in Tehnicki vjesnik - Technical Gazette
The paper presents an experimental research and a particular operation mode of testing, for an industrial application. The application refers to one stage axial gas free power turbine, run by the gases provided from two gas generators of...