Olariu Teodor Cristian

Mr. Olariu Teodor Cristian

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 September 2024 in Machines
Verified
Journal Article
Open access
PDF file
CTCornel Mihai Tarabic
Cornel Mihai Tarabic
Grigore CicanGrigore Cican
Grigore Cican
OCOlariu Teodor Cristian
Olariu Teodor Cristian
GDGabriel DEDIU
Gabriel DEDIU
RCRazvan Catana
Razvan Catana
To investigate the functionality and performance of a prototype microjet engine, we constructed a versatile test stand tailored to the specifications of a 400 N prototype. This test stand facilitated a comprehensive study by enabling real-time recording of 45 essential parameters for analysis, encompassing temperatures, pressures, speed, fuel flow, thrust, vibration, and various other monitored metrics. All parameters and control elements were seamlessly integrated via a data acquisition and control system, utilizing a compactDAQ (Data Acquisition) system from National Instruments and a custom Virtual Instrument programmed with graphical language. The test stand offers both manual and automated operation modes, with the flexibility for hybrid operation. For instance, following the idle regime, manual control using a potentiometer can seamlessly transition from automated control via a proportional control (P control) mechanism. Before the experimental campaign, rigorous verification and validation tests were conducted to ensure the reliability and accuracy of the setup. The experimental campaign comprised a series of manual tests focusing on the fuel system and automated tests covering starting, idle, working, and stopping regimes. This structured approach allowed for a comprehensive evaluation across different operational scenarios, providing insights into the engine’s behavior and performance under varying conditions.

15 July 2020
Verified
Book Chapter
Open access
PDF file
SCSandu Cosntantin
Sandu Cosntantin
RSRadu-Constantin Sandu
Radu-Constantin Sandu
OCOlariu Teodor Cristian
Olariu Teodor Cristian
Lately, the interest for passenger space planes, supersonic passenger aircraft, and supersonic business jets has greatly increased. In order to mitigate the sonic boom effects at ground level, some aerospace companies proposed airplanes that have a very small transversal fuselage section or that have a curved (“shaped”) fuselage. Obviously, shaping the fuselage leads to the increase of dynamic drag and manufacturing cost. Reducing the fuselage transverse section leads to reducing the useful volume inside fuselage and increases the landing distance of aircraft. The solution presented in this chapter shows that it is theoretically and technologically possible as the shock wave to be dispersed through mechanical or electrical means. The shock wave is in fact a stationary effect generated by the move of aircraft with constant speed relatively to surrounding air. If this feature is in a way or another canceled, the shock wave is dispersing. Due to dispersion of the shock wave the ‘N’ wave at the ground is tens of times larger and the sonic boom is correspondingly lower. The shock wave dispersion system of the future could be mechanical or electrical is activated only when the supersonic aircraft/space plane is flying horizontally over community.

16 December 2024 in Acoustics
Verified
Journal Article
Open access
PDF file
Andrei-George TotuAndrei-George Totu
Andrei-George Totu
OCOlariu Teodor Cristian
Olariu Teodor Cristian
DMDeaconu Marius
Deaconu Marius
LCLaurentiu Cristea
Laurentiu Cristea
LDLuminița Ioana Drăgășanu
Luminița Ioana Drăgășanu
SCSandu Cosntantin
Sandu Cosntantin
The transition to alternative electrical energy solutions for drone propulsion systems presents several challenges, particularly in managing noise. This noise, compounded by that from the propellers, can produce spectra that are either unpleasant to humans or detrimental to mission objectives. This study explores potential solutions to mitigate noise produced by a micro turboshaft engine, focusing on the solutions’ impact on weight, power output, and acoustic level. We propose two modular, scalable designs—one for the intake and one for the exhaust—based on well-known applications in cold and hot flows. These designs aim to operate effectively across the audible frequency spectrum and incorporate various Helmholtz resonator geometries, including combinations of different lengths, perforated metal sheet parameters, and cavity-filling materials, to enhance bandwidth and noise reduction. Experimental results indicate that these designs can achieve tonal noise reductions of up to 40 dB. While the results are promising, further analysis is required to evaluate the practical applicability and comprehensive impact of these solutions on drone performance.

11 November 2024 in Acoustics
Verified
Journal Article
Open access
PDF file
Andrei-George TotuAndrei-George Totu
Andrei-George Totu
OCOlariu Teodor Cristian
Olariu Teodor Cristian
ATAndrei-Tudor Trifu
Andrei-Tudor Trifu
ATAndreea TOTU
Andreea TOTU
Grigore CicanGrigore Cican
Grigore Cican
The implementation of serrated stator blades in axial compressor and fan stages offers significant advantages, such as enhanced performance and reduced noise levels, making it a practical and cost-effective solution. This study explores the impact of serrated blade design on noise reduction under specific engine operating conditions. A small-scale experimental test setup with a turbulence-inducing grid was designed for testing multiple grid sizes in order to identify the most promising configuration which replicates rotor–stator interaction. Numerical simulations and early experimental tests in an anechoic chamber using a four-blade cascade configuration at an airflow speed of 50 m/s revealed a small but notable noise reduction in the 1–6 kHz range for a partially matched grid–blade geometry. Serrated blades demonstrated an overall sound pressure level reduction of 1.5 dB and up to 12 dB in tonal noise, highlighting the potential of cascade configurations to improve acoustic performance in gas turbine applications.

7 November 2018 in AIP Conference Proceedings
Verified
Conference Paper
Closed access
PDF file
SCSandu Cosntantin
Sandu Cosntantin
Ionut Sebastian VintilaIonut Sebastian Vintila
Ionut Sebastian Vintila
MSMihail Sima
Mihail Sima
TTTraian Tipa
Traian Tipa
FZFelix Zavodnic
Felix Zavodnic
OCOlariu Teodor Cristian
Olariu Teodor Cristian
In the aerospace industry the demand for very strong and light components is a permanent objective. Composites have been used in manufacturing of aircraft and turbofans for decades. This is happening due to the high strength and low density of carbon fiber epoxy composites (~1.5g/cm3) in comparison with the lightest metallic alloys as magnesium alloys (~1.8g/cm3). Although in our days technology of carbon fiber epoxy composites reached a top level through manufacturing of fan blades for or ultra-high bypass turbofans, there is a room for improvement for important reduction of average density of components made of composites. This paper shows that using a bionic technology imitating the bird’s bone structure is possible for manufacturing of very light fan blades, fan vanes or fan housings having average densities smaller by several times than the compact composite materials. This technology can lead to manufacturing of very light turbofans or propfans which are the preferred propulsion systems for present aircraft.

4 March 2020
Verified
Book Chapter
Open access
PDF file
SCSandu Cosntantin
Sandu Cosntantin
OCOlariu Teodor Cristian
Olariu Teodor Cristian
RSRadu-Constantin Sandu
Radu-Constantin Sandu
The present chapter presents the advanced design and technology of special equipment (SECSL) which uses concentrated solar light for deviation of asteroids and cleaning the space of debris. The elliptical orbit of any cosmic body as presented in Einstein’s general theory of relativity is rotating around the ellipse center. The trajectory of a cosmic body is permanently affected by the gravity of other moving cosmic bodies. In the case of asteroids (relatively small masses), orbit changes can lead to a collision with the Earth. At this very moment, our civilization has no efficient and reliable mean to destroy or divert a cosmic body heading toward the Earth. This new idea represents a “light canon” which uses concentrated solar light for deviation or vaporization of dangerous asteroids. The equipment is composed out of two parabolic mirrors (one large and one small) with the same focal point and coincident axes. The mirrors reflect the sunlight between them hence the term “concentrated solar light.” Next, a similar idea to the SECSL equipment is presented but applied to space debris caused mostly by humans and a new way of disintegrating satellites, spent rocket boosters, thrust chambers, etc. in the Earth’s atmosphere during reentry.