Measurement of water content in forest habitats is considered essential in ecological research on forests, climate change, or forest management. In the traditional forest habitat classification, two systems of habitat conditions analysis are found: single factor and multifactor methods. Both are laborious and therefore costly. Remote sensing methods provide a low-cost alternative. The aim of the presented study was to find the relationship between the spectral indices obtained from satellite images and the forest habitats moisture indices used traditionally in the Polish forest habitats classification. The scientific hypothesis of the research is as follows: it is possible to assess the variation in the humidity of forest habitats on the basis of spectral indices. Using advanced geographic information system (GIS) technology, 923 research plots were tested, where habitat studies performed with the traditional methods were compared with the analysis of 191 spectral indices calculated for Sentinel-2 image data. The normalized difference vegetation index (NDVI) has proved to be the most useful to the assessing of moisture of forest habitats. The ranking of the most correlated indices was calculated as E_intg—the product of the absolute value of the slope and the mean square error complement, and for the top five indices was as follows: NDVI = 0.248619, EXG = 0.242112, OSAVI = 0.239412, DSWI-4 = 0.238784, and RDVI = 0.236995. The results also highlight the impact of water reservoirs on the humidity and trophicity of forest habitats, showing a decrease in the fertility of habitats with an increase in distance from the water reservoir. The results of the study can be used to preparing maps of the diversity of forest types, especially in hard-to-reach places, as well as to assess changes in the moisture status of habitats, which may be useful, for example, in the assessment of the fire risk of forest habitats. We have proved that NDVI can be used in applications for which it was not originally designed.

This study investigates the prospects for preserving the main Pinus sylvestris L. (Scots pine) ecotypes in Poland, considering the habitat conditions of their occurrence. Scots pine is known for its wide distribution and natural adaptability to various habitats. However, there is an increasing vulnerability of pine forests to damage from biotic factors and a decrease in natural regeneration, particularly in areas under legal protection. Additionally, projected climate change has raised concerns about the future of Pinus sylvestris, placing it in the “losing” group of tree species. The aim of the study was to analyze the habitat conditions of the seven main selected Pinus sylvestris L. ecotypes to assess the sustainability of pine stands in their natural habitat conditions. Out of the seven populations of studied pine ecotypes, only one grows under conditions representing a typical form of pine forest (Leucobryo–Pinetum plant association). Two populations grow under conditions corresponding to potential deciduous forests (Galio sylvatici–Carpinetum and Calamagrostio arundinaceae–Quercetum petraeae). The remaining populations represent potentially mixed oak–pine forests. Such a distribution of plant communities, except for Leucobryo–Pinetum, does not guarantee the continuity of the studied pine stands as a result of their natural regeneration. Therefore, it is necessary to preserve the offspring of the studied populations outside their occurrence sites, but the studied pine stands should be preserved until their natural death in their natural habitats. In the conducted research, the NDVI turned out to be very useful, showing a high correlation with the trophicity of habitat expressed in the diversity of plant communities, as well as with the height and diameter of the studied stands.

Climate change has significant natural and economic implications, but its extent is particularly challenging to assess in forest management, a field which combines both of the previous aspects and requires the evaluation of the impact of climate change on tree species over a 100-year timeframe. Oaks are among the tree species of significant natural and economic value in Europe. Therefore, the aim of this study was to analyze all oak stands in Poland and verify the hypothesis regarding differences between Quercus robur and Quercus petraea stands in terms of soil type, annual total precipitation, average annual air temperature, and the length of the growing season. Additionally, this study aimed to analyze the impact of these differences on the growth rates of both oak species and test whether climate change may affect oak stands. A database containing 195,241 tree stands, including different oak species with varying shares in the stand (from 10% to 100%), was analyzed. A particular emphasis was placed on Q. robur and Q. petraea. The results show that, although both oak species have a wide common range of occurrence, there are clear differences in their habitat preferences. Based on the ordinal regression analysis of selected oak stands, it was concluded that an increase in air temperature of 1 °C could impair the growth of Q. robur and slightly improve the growth of Q. petraea. This may indicate the possibility of expanding the geographic range of sessile oaks towards the east and northeast under warming climatic conditions, provided that appropriate moisture conditions are maintained.

This article concerns the use of remote sensing methods to assess the potential of tourism and recreation of lakes by using unmanned aerial vehicles as a tool that offers new measurement possibilities in such difficult areas to research as river and lake systems. For the purpose of the study, air surveys over three lakes used for tourism and recreation purposes were planned and carried out. These were the following lakes: Swarzędzkie, Wolsztyńskie and Zbąszyńskie located in western Poland. The photos were taken with a RGB and a multispectral cameras. On the basis of calculated orthophotomaps and digital surface models, anthropogenic and natural values were assessed. The examples of the research show the versatile possibilities of using drones dependent on the type sensor used. Remote sensing performed from the deck of an unmanned aircraft is widely used in the study of lakes and is an alternative to existing land and water research methods.

Thermal imaging is an important source of information for geographic information systems (GIS) in various aspects of environmental research. This work contains a variety of experiences related to the use of the Yuneec E10T thermal imaging camera with a 320 × 240 pixel matrix and 4.3 mm focal length dedicated to working with the Yuneec H520 UAV in obtaining data on the natural environment. Unfortunately, as a commercial product, the camera is available without radiometric characteristics. Using the heated bed of the Omni3d Factory 1.0 printer, radiometric calibration was performed in the range of 18–100 °C (high sensitivity range–high gain settings of the camera). The stability of the thermal camera operation was assessed using several sets of a large number of photos, acquired over three areas in the form of aerial blocks composed of parallel rows with a specific sidelap and longitudinal coverage. For these image sets, statistical parameters of thermal images such as the mean, minimum and maximum were calculated and then analyzed according to the order of registration. Analysis of photos taken every 10 m in vertical profiles up to 120 m above ground level (AGL) were also performed to show the changes in image temperature established within the reference surface. Using the established radiometric calibration, it was found that the camera maintains linearity between the observed temperature and the measured brightness temperature in the form of a digital number (DN). It was also found that the camera is sometimes unstable after being turned on, which indicates the necessity of adjusting the device’s operating conditions to external conditions for several minutes or taking photos over an area larger than the region of interest.

Measurement of water content in forest habitats is considered essential in all ecological research on forests, climate change or forest management, but also in protection against floods, wildfires and soil erosion. In traditional forest habitat classification two systems of habitat conditions analysis are found: single factor or multifactor methods. Both labour-intensive and time-consuming, and therefore costly. Remote sensing methods provide a sound and low-cost alternative. The aim of the presented study was to find the relationship between the spectral indicators obtained from satellite images and the Forest Habitats Moisture Indexes used traditionally in the Polish forest habitats classification system, allowing their practical use in forest management and the protection of forest ecosystems, not only in Poland. The research area was Bory Tucholskie National Park, in which the results of habitat studies performed with the traditional approach were compared with the analysis of 191 spectral indicators calculated for Sentinel-2 image data. Normalized Difference Vegetation Index (NDVI) was considered to best reflect the moisture content in forest habitats, but also the trophic status, provided that spectral images from the full growing season, which in the study area cover the period from June to August, are taken into account. The results of the research also highlight the impact of water reservoirs on the humidity and trophicity of forest habitats, showing a decrease in the fertility of forest habitats with distance from the water reservoir.