The water corrosion of tungsten as a target material can affect the safe operation of accelerator-driven neutron source. This paper reported the corrosion behaviors of tungsten in ultrapure water and tap water for 7, 14, 21, 30 and 60 days. Moreover, ICP-MS, XRD, XPS, SEM-EDS and LSCM were used to analyze the components in solutions, crystalline structures, chemical compositions and surface morphologies. It was found that the dissolution of tungsten, due to corrosion, reached its maximum between 30 days and 60 days in both solutions. The cube-shape substance, CaWO4, was the main corrosion product after tungsten in tap water. The tungsten oxide was changed from WO3 to WO2 during the corrosion of tungsten in ultrapure water. Compared with tungsten in ultrapure water, tungsten in tap water had its surface completely destroyed, with a dense diamond shape. Therefore, based on the analysis from this study, the corrosion mechanisms of tungsten in ultrapure and tap water were revealed.
Molybdenum has gained attention as a promising biomedical material due to its excellent mechanical properties and inherent antimicrobial activity. However, challenges remain in developing facile fabrication methods and further enhancing its antimicrobial efficacy. This study pioneers the investigation of biofilm inhibition by laser-treated molybdenum sheets against Pseudomonas aeruginosa (ATCC27853) and Staphylococcus aureus (ATCC25923). The experimental results demonstrate that nanosecond-pulsed laser processing significantly suppresses biofilm formation, reducing the minimum optical density (OD) values by 25.3% and 64.9% for the two bacterial strains, respectively. The laser treatment modifies the surface morphology of molybdenum by eliminating defects, reducing the effective contact area, and lowering hydrophobicity. Additionally, localized laser heating induces the formation of MoO3 on the surface, which reacts with water to generate molybdic acid—a key contributor to antibacterial activity. These findings highlight nanosecond-pulsed laser processing as a cost-effective, scalable surface-modification strategy for medical-grade molybdenum. This approach holds significant potential for broadening the antimicrobial applications of molybdenum-based biomedical devices and implants.