Maria Ines Cruz Orduña

Dr. Maria Ines Cruz Orduña


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 May 2020
Verified
Book Chapter
Open access
PDF file
JCJuan Rodrigo Laguna Camacho
Juan Rodrigo Laguna Camacho
SSSilvia M. Sánchez-Yáñez
Silvia M. Sánchez-Yáñez
GJGabriel Juárez-Morales
Gabriel Juárez-Morales
MOMaria Ines Cruz Orduña
Maria Ines Cruz Orduña
LRLuz M. Ramos-González
Luz M. Ramos-González
JCJavier Calderón-Sánchez
Javier Calderón-Sánchez
In the present work, an analysis was carried out to know the wear modes present in connecting rod bearings from internal combustion engines. These mechanical elements were selected since they are exposed to different engineering failures such as incorrect assembly, severe loads, extreme temperatures, inadequate conditions, and loss of lubricity. In this particular case, the bearings that were selected had a service life of approximately 8 years. Different techniques such as SEM and optical microscopy, EDS analysis, hardness testing, and surface profilometry were used to characterize the unworn and worn bearings. Wear mechanisms such as sliding wear (scoring), fatigue wear with cracks where torn out material was clearly observed, discoloration areas, and two- and three-body abrasion wear (rubbing marks) were identified on the bearing surfaces.

15 October 2026 in Modelling
Verified
Journal Article
Open access
PDF file
José R. García-MartínezJosé R. García-Martínez
José R. García-Martínez
MOMaria Ines Cruz Orduña
Maria Ines Cruz Orduña
Brenda Santa Dublan-BarragánBrenda Santa Dublan-Barragán
Brenda Santa Dublan-Barragán
JZJosé Marcos Zea
José Marcos Zea
Roberto Valentín Carrillo-SerranoRoberto Valentín Carrillo-Serrano
Roberto Valentín Carrillo-Serrano
Juvenal RodriguezJuvenal Rodriguez
Juvenal Rodriguez
Uncertain masses, dimensions, and friction coefficients can cause a robot’s motion to differ from predictions based on nominal parameters. This study examines how these uncertainties affect joint trajectories and which parameters deserve closer characterization. Ten physical parameters of a planar two-degree-of-freedom manipulator are represented by triangular fuzzy numbers, defined by lower, nominal, and upper values. Their α-cuts form nested parameter intervals, whose vertices are propagated through the nonlinear rigid-body equations to approximate the range of joint responses. Numerical tests use sinusoidal and step torques, different initial conditions, Monte Carlo sampling, and sensitivity analysis. Verification with 50,000 samples per tested domain reveals a small second-joint exceedance under baseline sinusoidal excitation and larger exceedances under step torques; the alternative sinusoidal configuration retains complete sampled containment. Under the baseline sinusoidal excitation, the individual parameter ranking remains unchanged at the four nondegenerate α levels tested; the link length l1, second-joint friction b2, and first-link mass m1 have the largest effects. A reduced-order surrogate also lowers the cost of repeated model evaluation within the tested domain. The contribution is an integrated workflow for assessing response dispersion and prioritizing parameter characterization before controller design or hardware testing. Its envelopes support preliminary model assessment rather than guaranteed response bounds.

15 May 2026 in Automation
Verified
Journal Article
Open access
PDF file
EIEduardo Vincent Islas
Eduardo Vincent Islas
MOMaria Ines Cruz Orduña
Maria Ines Cruz Orduña
JRJosé Ricardo Rivera Ruiz
José Ricardo Rivera Ruiz
ECEdson Cruz
Edson Cruz
ZFZayra E. Santos Flores
Zayra E. Santos Flores
José R. García-MartínezJosé R. García-Martínez
José R. García-Martínez
Adaptive cruise control (ACC) is a key component of advanced driver assistance systems, as it maintains a safe distance from preceding vehicles by regulating speed and spacing. However, vehicle dynamics, measurement uncertainty, and traffic variability pose significant challenges for conventional control methods. In this context, fuzzy logic (FL) has been widely explored for its ability to handle uncertainty and incorporate expert knowledge via linguistic rules. This article presents a systematic literature review on the application of FL in ACC systems, proposing a functional taxonomy based on the role of the fuzzy system within the control architecture. Following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) methodology, 103 initial records were identified, of which 87 studies were included in the final analysis. Four main categories are defined: Direct Fuzzy Control/Learning-Based, Fuzzy Supervisory Decision Control, Fuzzy Adaptive Robust Control, and Fuzzy Model-Based Control. Results indicate that Direct Fuzzy Control/Learning-Based and Fuzzy Supervisory Decision Control dominate the literature, accounting for 35.6% and 28%, respectively, while Fuzzy Adaptive Robust Control and Fuzzy Model-Based Control represent 20.7% and 14.9%. Mamdani-type systems predominate (78.16%), followed by Takagi-Sugeno (T–S) systems (17.24%), while type-2 fuzzy systems remain limited (4.60%) due to higher computational complexity. Recent trends highlight growing interest in adaptive and robust FL-based strategies.